u-boot/include/configs
Ian Campbell 21f0fd245e jetson-tk1: Add PSCI configuration options and reserve secure code
The secure world code is relocated to the MB just below the top of 4G, we
reserve it in the FDT (by setting CONFIG_ARMV7_SECURE_RESERVE_SIZE) but it is
not protected in h/w.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:16 -07:00
..
km nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
manroland powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
a3m071.h powerpc: a3m071: remove redundant CONFIG_SPL_* defines 2014-12-08 09:35:43 -05:00
a4m072.h powerpc: mpc52xx: a4m072: Convert to generic board 2014-11-19 13:07:21 +01:00
ac14xx.h powerpc: ac14xx: convert to generic board 2014-10-27 14:35:54 +01:00
acadia.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
adp-ag101.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
adp-ag101p.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
adp-ag102.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
afeb9260.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
alpr.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
alt.h arm: rmobile: alt: Add support SDHI 2015-02-25 13:13:38 +09:00
am43xx_evm.h ti: am335x/am437x/omap5 devices: Unify network environment variables 2015-05-08 17:24:16 -04:00
am335x_evm.h ti: am335x/am437x/omap5 devices: Unify network environment variables 2015-05-08 17:24:16 -04:00
am335x_igep0033.h AM335x: igep0033: Convert to generic board and use ti_am335x_common.h. 2014-09-04 13:06:00 -04:00
am3517_crane.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
am3517_evm.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
amcc-common.h kconfig: Move REGEX to Kconfig 2015-05-10 09:59:38 -04:00
amcore.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
ap325rxa.h sh: sh4: remove CONFIG_SH4 definition from board config 2014-01-08 14:47:40 +09:00
ap_sh4a_4a.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
apalis_t30.h apalis/colibri_t30: add misc cmds increase buf sizes and max args 2015-03-04 10:09:02 -07:00
apf27.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
apx4devkit.h Merge git://git.denx.de/u-boot-arm 2013-07-31 11:30:38 +02:00
arcangel4.h arc: move SYS_MONITOR_BASE setup in Konfig 2015-02-09 16:41:20 +03:00
aria.h powerpc: aria: convert to generic board 2014-10-27 14:35:54 +01:00
aristainetos.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
armadillo-800eva.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
arndale.h arndale: config: disable max77686 support 2015-01-29 17:09:59 -07:00
aspenite.h arm: aspenite: convert to generic board 2015-03-05 22:08:59 +01:00
astro_mcf5373l.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
at91-sama5_common.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
at91rm9200ek.h ARM: at91 series: convert to generic board 2014-11-17 08:47:15 -05:00
at91sam9m10g45ek.h ARM: atmel: at91sam9m10g45ek: enable spl support 2015-04-01 01:04:30 +02:00
at91sam9n12ek.h ARM: atmel: at91sam9n12ek: enable spl support 2015-04-01 01:04:31 +02:00
at91sam9rlek.h ARM: at91: at91sam9rlek: add mmc environment configuration 2015-03-18 23:36:02 +01:00
at91sam9x5ek.h ARM: atmel: at91sam9x5ek: enable spl support 2015-04-01 01:04:31 +02:00
at91sam9260ek.h ARM: at91: mmc portA support is only for at91sam9g20ek_2mmc board 2015-02-07 23:42:58 +01:00
at91sam9261ek.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
at91sam9263ek.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
atngw100.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
atngw100mkii.h atngwmkii: convert to generic board 2015-03-02 08:49:48 -05:00
atstk1002.h atstk1002: enable generic board 2015-02-17 22:54:41 +01:00
atstk1003.h avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk 2014-01-24 16:59:07 -05:00
atstk1004.h avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk 2014-01-24 16:59:07 -05:00
atstk1006.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
axs101.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
B4860QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
balloon3.h pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere 2015-03-02 10:59:50 +01:00
bamboo.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
bav335x.h Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
bcm28155_ap.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
bcm_ep_board.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
bct-brettl2.h bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boards 2015-01-16 13:31:35 +08:00
beagle_x15.h beagle_x15: increase phy autoneg timeout 2015-03-13 09:29:36 -04:00
beaver.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
bf506f-ezkit.h kconfig: move CONFIG_CMD_IMPORTENV to Kconfig 2014-09-24 18:30:29 -04:00
bf518f-ezbrd.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf525-ucr2.h blackfin: Add missing macro CONFIG_BFIN_SERIAL 2013-12-06 16:06:51 +08:00
bf526-ezbrd.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf527-ad7160-eval.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf527-ezkit.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf527-sdp.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf533-ezkit.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf533-stamp.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf537-minotaur.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf537-pnav.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf537-srv1.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf537-stamp.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf538f-ezkit.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf548-ezkit.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf561-acvilon.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf561-ezkit.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf609-ezkit.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
bfin_adi_common.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bg0900.h ARM: mxs: Add PPC-AG BG0900 board 2013-10-17 09:44:20 +02:00
blackstamp.h blackfin: Add missing macro CONFIG_BFIN_SERIAL 2013-12-06 16:06:51 +08:00
blackvme.h blackfin: fix build error by adding CONFIG_BFIN_SERIAL 2013-12-16 11:38:32 +08:00
br4.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
BSC9131RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
BSC9132QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
bubinga.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
bur_am335x_common.h board/BuR/common: rename "usbupdate" environment to "usbscript" 2015-05-08 17:24:17 -04:00
C29XPCIE.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
calimain.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
cam_enc_4xx.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
canmb.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
canyonlands.h powerpc: ppc4xx: convert AMCC boards to generic board 2015-03-28 12:09:46 -04:00
cardhu.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
cgtqmx6eval.h cgtqmx6eval: Set default environment to use zImage 2014-02-11 11:04:40 +01:00
charon.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
chromebook_link.h x86: Move CONFIG_ENV_IS_IN_SPI_FLASH to x86-common.h 2015-04-29 18:51:48 -06:00
chromebox_panther.h x86: Add support for panther (Asus Chromebox) 2015-04-16 19:27:40 -06:00
cm-bf527.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf533.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
cm-bf537e.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf537u.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf548.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf561.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
cm5200.h powerpc/cm5200: migrate to generic board 2015-01-05 16:40:18 -05:00
cm_fx6.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
cm_t35.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
cm_t54.h omap5: cm-t54: add sata support 2015-01-05 15:13:47 -05:00
cm_t335.h compulab: eeprom: add support for defining eeprom i2c bus 2014-09-09 15:32:32 +02:00
cm_t3517.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
cmi_mpc5xx.h config: remove platform CONFIG_SYS_HZ definition part 2/2 2013-11-04 11:06:16 -05:00
cobra5272.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
colibri_pxa270.h pxa: colibri_pxa270: integrate latest validated register settings 2015-03-02 10:59:51 +01:00
colibri_t20.h ARM: tegra: update colibri_t20 configuration 2015-03-30 10:04:44 -07:00
colibri_t30.h apalis/colibri_t30: add misc cmds increase buf sizes and max args 2015-03-04 10:09:02 -07:00
colibri_vf.h colibri_vf: Enable USB support for Colibri Vybrid 2015-04-23 14:56:09 -04:00
controlcenterd.h kconfig: move CONFIG_CMD_BOOTM to Kconfig 2014-09-24 18:30:28 -04:00
corenet_ds.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
corvus.h arm, at91: corvus: move MACH_TYPE to defconfig 2015-04-01 01:04:28 +02:00
CPCI2DP.h ppc4xx: switch CPCI2DP to generic board 2015-01-13 09:37:26 -05:00
CPCI4052.h ppc4xx: cleanup CPCI4052 board 2015-01-13 09:37:26 -05:00
cpu9260.h at91: remove redundant AT91FAMILY definition in board config file 2014-05-27 00:10:52 +02:00
cpuat91.h ARM: remove CONFIG_ARM920T defines 2014-11-20 11:28:25 -05:00
crownbay.h x86: queensbay: Implement PIRQ routing 2015-04-29 18:51:49 -06:00
csb272.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
csb472.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
da830evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
da850evm.h da850evm: Use generic board and libfdt, fix size for SPI flash 2015-01-05 15:13:46 -05:00
dalmore.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
davinci_dm355evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dm355leopard.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dm365evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dm6467evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dvevm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_schmoogie.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_sffsdr.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_sonata.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
db-88f6820-gp.h arm: mvebu: Add Armada A38x DB-88F6820-GP board support 2015-05-05 14:32:05 +02:00
db-mv784mp-gp.h arm: mvebu: Change network init code to allow a more flexible setup 2015-05-05 14:31:49 +02:00
dbau1x00.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
devkit3250.h sizes.h - consolidate for all architectures 2014-03-04 12:15:01 -05:00
devkit8000.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
dig297.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
digsy_mtc.h powerpc: digsy_mtc: convert to generic board 2014-10-27 14:35:54 +01:00
dlvision-10g.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
dlvision.h board: dlvision: Reduce memory footprint 2014-11-19 08:48:41 +01:00
dnp5370.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
dns325.h ARM: kirkwood: dns325: Add generic board support 2015-01-12 09:38:47 -05:00
dockstar.h kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
dra7xx_evm.h ARM: DRA7XX: Enable Fastboot 2015-04-23 13:59:19 -04:00
draco.h siemens, draco: add new target 2014-05-13 19:43:01 -04:00
dreamplug.h dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb 2015-03-05 22:09:00 +01:00
duovero.h omap4: duovero: Add Gumstix DuoVero machine. 2014-05-23 19:40:05 -04:00
dxr2.h siemens: change LED indication in DFU mode 2014-05-13 19:43:00 -04:00
ea20.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
eb_cpu5282.h m68k: mcf52x2: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
eb_cpux9k2.h arm: atmel: eb_cpux9k2: config clean up 2013-12-01 22:38:53 +01:00
ebony.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
eco5pk.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ecovec.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
edb93xx.h ARM: remove CONFIG_ARM920T defines 2014-11-20 11:28:25 -05:00
edminiv2.h i2c: mvtwsi: Support for up to 4 different controllers 2015-04-15 16:33:17 +02:00
embestmx6boards.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
enbw_cmc.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
espt.h sh: sh4: remove CONFIG_SH4 definition from board config 2014-01-08 14:47:40 +09:00
ethernut5.h nand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 option 2015-03-30 23:16:54 -05:00
exynos-common.h exynos: config: enable arch memcpy and arch memset 2015-03-09 11:13:28 -04:00
exynos4-common.h config: exynos: common: Provide env variables to support Image.itb 2015-04-06 15:23:59 +09:00
exynos5-common.h exynos5: add trace feature #ifdef in exynos5-common.h 2015-04-06 14:19:36 +09:00
exynos5-dt-common.h dm: cros_ec: Convert to Kconfig 2015-02-19 06:19:18 -07:00
exynos5250-common.h sandbox: exynos: Move CONFIG_SOUND_WM8994 to Kconfig 2015-04-18 11:11:39 -06:00
exynos5420-common.h exynos: cros_ec: Drop unnecessary init 2015-04-18 11:11:15 -06:00
favr-32-ezkit.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
flea3.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
fx12mm.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
galileo.h x86: Move CONFIG_ENV_IS_IN_SPI_FLASH to x86-common.h 2015-04-29 18:51:48 -06:00
gdppc440etx.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
goflexhome.h kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
gose.h arm: rmobile: gose: Add support SDHI 2015-02-25 13:13:46 +09:00
gplugd.h arm: gplugd: convert to generic board 2015-03-05 22:08:59 +01:00
gr_cpci_ax2000.h sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition 2014-03-21 16:44:10 -04:00
gr_ep2s60.h sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition 2014-03-21 16:44:10 -04:00
gr_xc3s_1500.h sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition 2014-03-21 16:44:10 -04:00
grasshopper.h grasshopper: enable generic board 2015-02-17 22:54:39 +01:00
grsim.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
grsim_leon2.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
guruplug.h marvell: kirkwood: guruplug refresh for newer kernel 2015-01-26 00:25:29 +01:00
gw_ventana.h Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
h2200.h kconfig: move CONFIG_CMD_IMPORTENV to Kconfig 2014-09-24 18:30:29 -04:00
hammerhead.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
harmony.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
highbank.h ARM: highbank: convert to generic board 2014-05-25 15:18:26 +02:00
hrcon.h mpc83xx: Add gdsys hrcon board 2014-11-19 08:48:42 +01:00
hummingboard.h hummingboard: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:48 +01:00
ib62x0.h kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
ibf-dsp561.h bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boards 2015-01-16 13:31:35 +08:00
icon.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
iconnect.h kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
ids8313.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
ima3-mx53.h config: remove platform CONFIG_SYS_HZ definition part 2/2 2013-11-04 11:06:16 -05:00
imx6_spl.h imx:mx6 add mx6sx in imx spl header file 2015-01-22 09:55:47 +01:00
imx27lite-common.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
imx27lite.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
imx31_litekit.h ARM: remove CONFIG_ARM1136 defines 2014-11-20 11:28:25 -05:00
imx31_phycore.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
inka4x0.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
integrator-common.h ARM: integrator: abolish CONFIG_INTEGRATOR 2015-04-23 08:52:27 -04:00
integratorap.h ARM: integrator: move board select into mach-integrator/Kconfig 2015-04-23 08:52:27 -04:00
integratorcp.h ARM: integrator: move CONFIG_ARCH_CINTEGRATOR to Kconfig 2015-04-23 08:52:27 -04:00
intip.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
io.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
io64.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
iocon.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
ip04.h bfin: enlarge the monitor size for ip04 board to avoid oversize link error 2015-01-16 13:31:35 +08:00
ipam390.h arm, da8xx: convert ipam390 board to generic board support 2015-03-05 10:08:13 -05:00
ipek01.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
jetson-tk1.h jetson-tk1: Add PSCI configuration options and reserve secure code 2015-05-13 09:24:16 -07:00
jornada.h config: remove platform CONFIG_SYS_HZ definition part 2/2 2013-11-04 11:06:16 -05:00
jupiter.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
k2e_evm.h keystone2: config: align names of images with MCSDK 2014-11-06 11:04:39 -05:00
k2hk_evm.h keystone2: config: align names of images with MCSDK 2014-11-06 11:04:39 -05:00
k2l_evm.h keystone2: config: align names of images with MCSDK 2014-11-06 11:04:39 -05:00
katmai.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
kilauea.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
km82xx.h 82xx/km82xx: read the IVM eeprom earlier 2015-02-16 15:48:35 -05:00
km8360.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
km_kirkwood.h arm/km: disable subpage write for km_kirkwood_pci and kmsuv31 target 2014-08-30 07:46:41 -04:00
kmp204x.h kmp204x: add support for the kmcoge4 board 2014-02-03 08:38:50 -08:00
koelsch.h arm: rmobile: koelsch: Add support SDHI 2015-02-25 13:13:43 +09:00
ks2_evm.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
kwb.h board/BuR/common: rename "usbupdate" environment to "usbscript" 2015-05-08 17:24:17 -04:00
kzm9g.h rmobile: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
lacie_kw.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
lager.h arm: rmobile: lager: Add support SDHI 2015-02-25 13:13:49 +09:00
lp8x4x.h Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-01-10 10:56:00 -05:00
ls1021aqds.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
ls1021atwr.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
ls2085a_common.h ls2085a: esdhc: Add esdhc support for ls2085a 2015-04-23 16:46:51 -07:00
ls2085a_emu.h drivers/fsl-mc: Changed MC firmware loading for new boot architecture 2015-04-23 08:55:57 -07:00
ls2085a_simu.h drivers/fsl-mc: Changed MC firmware loading for new boot architecture 2015-04-23 08:55:57 -07:00
ls2085aqds.h ls2085a: esdhc: Add esdhc support for ls2085a 2015-04-23 16:46:51 -07:00
ls2085ardb.h ls2085a: esdhc: Add esdhc support for ls2085a 2015-04-23 16:46:51 -07:00
lsxl.h lsxl: switch from bootm to bootz for boot commands 2015-02-12 15:28:02 +01:00
luan.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
lwmon5.h powerpc: lwmon5: remove redundant CONFIG_SPL_* defines 2014-12-08 09:35:43 -05:00
m28evk.h kconfig: Move REGEX to Kconfig 2015-05-10 09:59:38 -04:00
m53evk.h kconfig: Move REGEX to Kconfig 2015-05-10 09:59:38 -04:00
M5208EVBE.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5235EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5249EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5253DEMO.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5253EVBE.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5272C3.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5275EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5282EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5329EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5373EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5475EVB.h m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
M5485EVB.h m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
M52277EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M53017EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M54418TWR.h nand: yaffs: Remove the "nand write.yaffs" command 2015-03-30 23:24:39 -05:00
M54451EVB.h m68k: mcf5445x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
M54455EVB.h m68k: mcf5445x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
magnesium.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
makalu.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
malta.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
maxbcm.h arm: mvebu: Change network init code to allow a more flexible setup 2015-05-05 14:31:49 +02:00
mcx.h mcx: update maintainer and convert to generic board 2015-04-09 16:48:03 -04:00
mecp5123.h powerpc: mecp5123: convert to generic board 2014-10-27 14:35:54 +01:00
medcom-wide.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
meesc.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
microblaze-generic.h microblaze: spl: Do not call mem_malloc_init and use early alloc 2015-02-09 15:13:12 +01:00
MigoR.h sh: sh4: remove CONFIG_SH4 definition from board config 2014-01-08 14:47:40 +09:00
mimc200.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
minnowmax.h x86: minnowmax: use the correct NOR in the configuration 2015-04-29 18:51:50 -06:00
MIP405.h MIP405: convert to generic board 2014-10-10 09:44:44 -04:00
ml507.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
motionpro.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
MPC832XEMDS.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC837XEMDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC837XERDB.h Use generic board architecture for MPC837xERDB 2015-01-20 10:19:46 -05:00
mpc5121-common.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
mpc5121ads.h powerpc: mpc5121ads: convert to generic board 2014-10-27 14:35:54 +01:00
mpc8308_p1m.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8308RDB.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8313ERDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8315ERDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8323ERDB.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8349EMDS.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8349ITX.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8536DS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8540ADS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8541CDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8544DS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8548CDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8555CDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8560ADS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8568MDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8569MDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8572DS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8610HPCD.h powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8641HPCN.h powerpc/mpc8641hpcn: Move environment to avoid conflict 2015-04-20 10:15:30 -07:00
mpr2.h sh: sh3: remove CONFIG_SH3 definition from board config 2014-01-08 14:47:40 +09:00
ms7720se.h sh: sh3: remove CONFIG_SH3 definition from board config 2014-01-08 14:47:40 +09:00
ms7722se.h sh: sh4: remove CONFIG_SH4 definition from board config 2014-01-08 14:47:40 +09:00
ms7750se.h sh: sh4: remove CONFIG_SH4 definition from board config 2014-01-08 14:47:40 +09:00
mt_ventoux.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
munices.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
mv-common.h arm: mvebu: mv-common.h: Add CONFIG_PREBOOT 2015-05-05 14:32:04 +02:00
mv88f6281gtw_ge.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
mx6_common.h mx6_common: Do not select esdhc DDR mode for all boards 2015-03-13 13:35:12 +01:00
mx6cuboxi.h mx6cuboxi: Load the correct 'fdtfile' variable 2015-04-27 13:13:58 +02:00
mx6qarm2.h mx6qarm2: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:45 +01:00
mx6qsabreauto.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx6sabre_common.h mx6sabre: Do not enable UMS with SPL 2015-03-13 13:46:51 +01:00
mx6sabresd.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx6slevk.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx6sxsabresd.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx23_olinuxino.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
mx23evk.h mx23evk: Set default environment to use zImage 2014-02-11 11:04:40 +01:00
mx25pdk.h mx25pdk: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:48 +01:00
mx28evk.h mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected 2014-06-17 16:39:09 +02:00
mx31ads.h mx31ads: Convert to generic board 2015-02-24 17:13:36 -05:00
mx31pdk.h mx31pdk: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:47 +01:00
mx35pdk.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx51_efikamx.h spi: mxc: fix sf probe when using mxc_spi 2014-09-24 17:25:39 +05:30
mx51evk.h mx51evk: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:47 +01:00
mx53ard.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx53evk.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx53loco.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx53smd.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mxs.h mxs: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:48 +01:00
nas220.h Add support for Seagate BlackArmor NAS220 2015-01-14 11:37:39 -05:00
neo.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
nhk8815.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
nios2-generic.h nios2: rebase nios2-generic board to 3c120 reference design 2014-08-30 17:48:43 +08:00
nitrogen6x.h Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
nokia_rx51.h ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:33 -04:00
novena.h kconfig: Move REGEX to Kconfig 2015-05-10 09:59:38 -04:00
nyan-big.h tegra: config: nyan-big: Enable LCD 2015-05-13 09:24:12 -07:00
o2d.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2d300.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2dnt-common.h powerpc: o2dnt: convert to generic board 2014-11-07 16:27:05 -05:00
o2dnt2.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2i.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2mnt.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o3dnt.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
ocotea.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
odroid.h Odroid U3: use common code for dram reservation 2015-03-04 21:25:35 +09:00
odroid_xu3.h Odroid-XU3: enable the last dram bank and reserve 22MiB 2015-03-04 21:25:35 +09:00
omap3_beagle.h omap3_beagle: Add boot script support to omap3 beagle board 2014-09-04 13:05:57 -04:00
omap3_cairo.h omap3: add support for QUIPOS Cairo board. 2015-03-05 20:13:21 -05:00
omap3_evm.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap3_evm_common.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_evm_quick_mmc.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap3_evm_quick_nand.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap3_igep00x0.h OMAP3: igep0032: Fix regression due commit f3b4bc45. 2015-02-24 17:04:00 -05:00
omap3_logic.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_mvblx.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_overo.h omap3: overo: Allow boot with kernel in UBI rootfs 2015-05-10 07:29:39 -04:00
omap3_pandora.h omap3: pandora: use common configuration 2015-04-09 16:49:37 -04:00
omap3_sdp3430.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_zoom1.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap4_panda.h ARM: omap4_panda: enable saveenv command 2015-03-28 12:07:44 -04:00
omap4_sdp4430.h ARM: OMAP4: Rename to ti_omap4_common.h 2014-01-24 11:38:39 -05:00
omap5_uevm.h TI: armv7: enable UUID and PART 2015-01-05 15:13:45 -05:00
omapl138_lcdk.h davinci: add support for omapl138-lcdk board 2015-04-23 13:58:43 -04:00
openrd.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
openrisc-generic.h config: remove platform CONFIG_SYS_HZ definition part 2/2 2013-11-04 11:06:16 -05:00
origen.h ORIGEN: Enhance origen config to be more flexible on boot. 2014-11-25 10:30:25 +09:00
ot1200.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
otc570.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
p1_p2_rdb_pc.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
p1_twr.h board/freescale: use generic board architecture for p1025-twr 2014-12-05 08:06:09 -08:00
p3p440.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
P1010RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P1022DS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P1023RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P2041RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P3041DS.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
P4080DS.h powerpc/p4080: enable support for PCIe SATA 2013-11-22 12:43:15 -08:00
P5020DS.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
P5040DS.h powerpc/P5040DS: enable SATA support 2014-12-05 08:06:10 -08:00
palmld.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
palmtc.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
palmtreo680.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
PATI.h PATI: fix broken SPI access 2014-10-10 09:44:44 -04:00
paz00.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
pb1x00.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
pcm030.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
pcm051.h pcm051: Add boot script support to pcm051 2015-01-13 15:26:10 -05:00
pcs440ep.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
pdm360ng.h powerpc: pdm360ng: convert to generic board 2014-10-27 14:35:54 +01:00
peach-pi.h config: peach: Correct memory layout environment settings 2015-04-06 14:21:29 +09:00
peach-pit.h config: peach: Correct memory layout environment settings 2015-04-06 14:21:29 +09:00
pengwyn.h ARM: omap: move board specific NAND configs out from ti_armv7_common.h 2014-07-25 16:26:12 -04:00
pepper.h am335x: pepper: Add Gumstix Pepper AM335x-based machine 2014-05-13 19:47:51 -04:00
PIP405.h PIP405: convert to generic board 2014-10-10 09:44:44 -04:00
platinum.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
platinum_picon.h arm: mx6: Add Barco platinum-picon and platinum-titanium 2015-01-19 09:07:31 +01:00
platinum_titanium.h arm: mx6: Add Barco platinum-picon and platinum-titanium 2015-01-19 09:07:31 +01:00
PLU405.h ppc4xx: switch PLU405 to generic board 2015-01-13 09:37:26 -05:00
plutux.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
pm9g45.h PM9G45 adding generic board support 2015-01-13 09:37:27 -05:00
pm9261.h PM9261 adding generic board support 2015-01-13 09:37:27 -05:00
pm9263.h PM9263 adding generic board support 2015-01-13 09:37:27 -05:00
PMC405DE.h ppc4xx: switch PMC405DE to generic board 2015-01-13 09:37:26 -05:00
PMC440.h ppc4xx: update PMC440 board support 2014-10-27 17:54:13 -04:00
pogo_e02.h kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
porter.h arm: rmobile: Add Porter board support 2015-02-25 14:17:49 +09:00
pr1.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
pxa-common.h kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX 2013-12-13 09:15:32 -05:00
pxa255_idp.h kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX 2013-12-13 09:15:32 -05:00
pxm2.h arm, am335x: siemens boards add FIT support 2014-12-04 21:28:32 -05:00
qemu-mips.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
qemu-mips64.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
qemu-ppce500.h qemu-ppce500: Add support for 64bit CCSR map 2015-04-20 10:15:29 -07:00
qong.h ARM: remove CONFIG_ARM1136 defines 2014-11-20 11:28:25 -05:00
r0p7734.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
r2dplus.h sh: sh4: remove CONFIG_SH4 definition from board config 2014-01-08 14:47:40 +09:00
r7780mp.h sh: sh4: Remove CONFIG_SH4A definition from source code 2014-01-09 12:47:15 +09:00
rcar-gen2-common.h malloc_f: enable SYS_MALLOC_F by default if DM is on 2015-03-28 09:03:09 -04:00
rd6281a.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
redwood.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
rpi-common.h rpi: add support for Raspberry Pi 2 model B 2015-02-21 08:28:16 -05:00
rpi.h rpi: add support for Raspberry Pi 2 model B 2015-02-21 08:28:16 -05:00
rpi_2.h rpi: add support for Raspberry Pi 2 model B 2015-02-21 08:28:16 -05:00
rsk7203.h sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig 2014-11-13 08:47:58 +09:00
rsk7264.h sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig 2014-11-13 08:47:58 +09:00
rsk7269.h sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig 2014-11-13 08:47:58 +09:00
rut.h arm, am335x: siemens boards add FIT support 2014-12-04 21:28:32 -05:00
s5p_goni.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
s5pc210_universal.h usb: s3c-otg: Split out PHY control 2014-11-07 16:32:02 +01:00
sama5d3_xplained.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sama5d3xek.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sama5d4_xplained.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sama5d4ek.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sandbox.h sandbox: Don't try distro_bootcmd by default 2015-05-06 12:48:36 -06:00
sansa_fuze_plus.h usb: mv_udc: Rename to ci_udc 2014-02-06 04:48:15 +01:00
sbc35_a9g20.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
sbc405.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
sbc8349.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
sbc8548.h sbc8548: enable and test CONFIG_SYS_GENERIC_BOARD 2014-11-14 11:12:13 -08:00
sbc8641d.h powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
sc_sps_1.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
scb9328.h ARM: remove CONFIG_ARM920T defines 2014-11-20 11:28:25 -05:00
seaboard.h tegra: seaboard: Remove unused CONFIG_UART_DISABLE_GPIO 2015-03-30 09:59:58 -07:00
secomx6quq7.h board/seco: Add mx6q-uq7 basic board support 2015-03-23 13:19:18 +01:00
sequoia.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
sh7752evb.h sh: Move SH_32BIT to Kconfig 2014-11-17 13:16:20 +09:00
sh7753evb.h sh: Move SH_32BIT to Kconfig 2014-11-17 13:16:20 +09:00
sh7757lcr.h sh: Move SH_32BIT to Kconfig 2014-11-17 13:16:20 +09:00
sh7763rdp.h sh: sh4: remove CONFIG_SH4 definition from board config 2014-01-08 14:47:40 +09:00
sh7785lcr.h sh: sh4: Remove CONFIG_SH4A definition from source code 2014-01-09 12:47:15 +09:00
sheevaplug.h kirkwood: sheevaplug: add FDT support 2015-02-06 17:24:34 +01:00
shmin.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
siemens-am33x-common.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
silk.h arm: rmobile: silk: Add support SDHI 2015-02-25 14:20:10 +09:00
smdk2410.h Merge branch 'master' of http://git.denx.de/u-boot-samsung 2014-11-26 11:21:16 -05:00
smdk5250.h exynos: cros_ec: Drop unnecessary init 2015-04-18 11:11:15 -06:00
smdk5420.h Exynos: Move down common USB configuration 2014-12-30 17:04:02 +09:00
smdkc100.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
smdkv310.h usb: s3c-otg: Split out PHY control 2014-11-07 16:32:02 +01:00
snapper9260.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
snow.h dm: usb: exynos: Enable both USB ports on snow 2015-04-18 11:11:29 -06:00
snowball.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
socfpga_arria5.h kconfig: Move REGEX to Kconfig 2015-05-10 09:59:38 -04:00
socfpga_common.h ARM: socfpga: abolish CONFIG_SOCFPGA 2015-05-07 05:21:17 +02:00
socfpga_cyclone5.h kconfig: Move REGEX to Kconfig 2015-05-10 09:59:38 -04:00
socrates.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
spear-common.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
spear3xx_evb.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
spear6xx_evb.h net/designware - switch driver to phylib usage 2014-02-07 09:16:46 -05:00
stamp9g20.h at91: enable USB ethernet for taskit stamp9g20 2014-03-12 17:04:34 -04:00
stm32f429-discovery.h stm32f4: add serial print port 2015-05-10 07:29:38 -04:00
stv0991.h stv0991: fdt: add stv0991 device tree 2015-05-10 09:59:36 -04:00
stxgp3.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
stxssa.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
sun4i.h sunxi: usb: Do not call phy_probe from hcd code 2015-05-04 16:51:55 +02:00
sun5i.h sunxi: usb: Do not call phy_probe from hcd code 2015-05-04 16:51:55 +02:00
sun6i.h sunxi: usb: Do not call phy_probe from hcd code 2015-05-04 16:51:55 +02:00
sun7i.h sunxi: usb: Do not call phy_probe from hcd code 2015-05-04 16:51:55 +02:00
sun8i.h sunxi: usb: Do not call phy_probe from hcd code 2015-05-04 16:51:55 +02:00
sunxi-common.h sunxi: Move all boards to the driver-model 2015-05-04 16:51:54 +02:00
suvd3.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
t3corp.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
t4qds.h powerpc/freescale: Convert selected boards to generic board architecture 2014-05-13 08:31:22 -07:00
T102xQDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T102xRDB.h powerpc/t1023rdb: Add T1023 RDB board support 2015-05-04 09:24:31 -07:00
T104xRDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T208xQDS.h powerpc/t2080qds: enable eSDHC peripheral clock support 2015-05-04 09:25:48 -07:00
T208xRDB.h board/t2080rdb: enable CONFIG_PHY_AQUANTIA 2015-04-20 10:15:30 -07:00
T1040QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T4240QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T4240RDB.h powerpc/t4rdb: Add SD boot support for T4240RDB board 2015-05-04 09:24:04 -07:00
taihu.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
taishan.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
tam3517-common.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
tao3530.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
taurus.h arm, at91: taurus remove MACH_TYPE definitions in config file 2015-02-07 23:43:24 +01:00
tb100.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
tbs2910.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
tcm-bf518.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
tcm-bf537.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
tec-ng.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
tec.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
tegra-common-post.h ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization 2015-05-13 09:24:12 -07:00
tegra-common-usb-gadget.h ARM: tegra: enable DFU too 2014-08-18 16:57:03 -07:00
tegra-common.h ARM: tegra: enable STDIO deregistration 2015-05-13 09:24:12 -07:00
tegra20-common.h ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization 2015-05-13 09:24:12 -07:00
tegra30-common.h ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization 2015-05-13 09:24:12 -07:00
tegra114-common.h ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization 2015-05-13 09:24:12 -07:00
tegra124-common.h ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization 2015-05-13 09:24:12 -07:00
ti814x_evm.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
ti816x_evm.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
ti_am335x_common.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
ti_armv7_common.h ti: am335x/am437x/omap5 devices: Unify network environment variables 2015-05-08 17:24:16 -04:00
ti_omap3_common.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
ti_omap4_common.h TI:OMAP4: enable EXT support in SPL for OMAP4 boards 2014-10-27 17:54:09 -04:00
ti_omap5_common.h ti: am335x/am437x/omap5 devices: Unify network environment variables 2015-05-08 17:24:16 -04:00
titanium.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
tk71.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
tny_a9260.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
TQM823L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM823M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM834x.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
TQM850L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM850M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM855L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM855M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM860L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM860M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM862L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM862M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM866M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM885D.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM5200.h powerpc: TQM5200: convert to generic board 2014-10-29 16:18:09 +01:00
tqma6.h Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
tqma6_mba6.h arm: mx6: tqma6: Extract baseboard configs into separate config file 2015-04-22 16:02:45 +02:00
trats.h config: exynos: trats: Enable support for Image.itb at trats device 2015-04-06 15:23:59 +09:00
trats2.h config: exynos: trats2: Enable support for Image.itb at trats2 device 2015-04-06 15:23:59 +09:00
tricorder.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
trimslice.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
trizepsiv.h kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX 2013-12-13 09:15:32 -05:00
tseries.h board/BuR/common: rename "usbupdate" environment to "usbscript" 2015-05-08 17:24:17 -04:00
tt01.h ARM: remove CONFIG_ARM1136 defines 2014-11-20 11:28:25 -05:00
tuxx1.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
twister.h ARM: twister: add missing gpio clock init 2014-01-07 16:41:12 -05:00
tx25.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
u8500_href.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
UCP1020.h powerpc/mpc85xx: Add board support for ucp1020 2015-05-04 09:26:26 -07:00
udoo.h config: remove redundant CONFIG_SYS_PROMPT defines 2014-11-23 06:49:02 -05:00
uniphier.h ARM: UniPhier: add empty lowlevel_init to U-boot proper 2015-03-24 00:15:48 +09:00
usb_a9263.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
usbarmory.h ARM: mx5: add support for USB armory board 2015-04-09 09:14:12 +02:00
v5fx30teval.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
v38b.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
VCMA9.h nand: yaffs: Remove the "nand write.yaffs" command 2015-03-30 23:24:39 -05:00
vct.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
ve8313.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
venice2.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
ventana.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
versatile.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
vexpress_aemv8a.h vexpress64: use DM for all vexpress64 boards 2015-04-23 08:52:26 -04:00
vexpress_ca5x2.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
vexpress_ca9x4.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
vexpress_ca15_tc2.h ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options 2014-11-24 09:09:49 +01:00
vexpress_common.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
vf610twr.h arm: vf610: Remove duplicate MTD defines. 2015-01-14 11:35:44 -05:00
vision2.h spi: mxc: fix sf probe when using mxc_spi 2014-09-24 17:25:39 +05:30
vl_ma2sc.h ARM: at91: remove redundant ARM926EJS definition in board config files 2014-05-27 00:10:53 +02:00
vme8349.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
VOM405.h ppc4xx: switch VOM405 to generic board 2015-01-13 09:37:27 -05:00
vpac270.h pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere 2015-03-02 10:59:50 +01:00
walnut.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
wandboard.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
warp.h warp: Select CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE 2015-03-13 13:35:35 +01:00
whistler.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
wireless_space.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
woodburn.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
woodburn_common.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
woodburn_sd.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
work_92105.h lpc32xx: add support for board work_92105 2015-04-10 14:23:39 +02:00
x86-chromebook.h x86: Move common Chromebook config into a separate file 2015-04-16 19:27:40 -06:00
x86-common.h x86: Write configuration tables in last_stage_init() 2015-04-29 18:51:49 -06:00
x600.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
xaeniax.h kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX 2013-12-13 09:15:32 -05:00
xfi3.h usb: mv_udc: Rename to ci_udc 2014-02-06 04:48:15 +01:00
xilinx-ppc.h config: remove platform CONFIG_SYS_HZ definition part 2/2 2013-11-04 11:06:16 -05:00
xilinx-ppc405-generic.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xilinx-ppc405.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
xilinx-ppc440-generic.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xilinx-ppc440.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
xilinx_zynqmp.h zynqmp: Enable SDHCI0 options 2015-04-29 11:19:04 +02:00
xpedite517x.h powerpc: xes: Convert to generic board 2015-01-12 09:38:47 -05:00
xpedite520x.h powerpc: xes: Convert to generic board 2015-01-12 09:38:47 -05:00
xpedite537x.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
xpedite550x.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
xpedite1000.h powerpc: xes: Convert to generic board 2015-01-12 09:38:47 -05:00
yosemite.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
yucca.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
zeus.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
zipitz2.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
zmx25.h zmx25: Convert to generic board 2015-02-24 17:13:57 -05:00
zynq-common.h Merge branch 'u-boot/master' into 'u-boot-arm/master' 2015-05-05 10:09:06 +02:00
zynq_microzed.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_picozed.h zynq: Add Zynq PicoZed board support 2015-04-29 11:19:02 +02:00
zynq_zc70x.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_zc770.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_zed.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_zybo.h zynq: zybo: Move CONFIG_DEFAULT_DEVICE_TREE to defconfig 2014-11-13 08:38:22 -05:00