mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
7df55bb9b5
Both U-boot and Linux kernel have grown over the last releases and don't fit anymore in the 2M EPROM of the board. So, rework the setup to allow storing the Linux kernel image on the UBIFS NAND Flash. Also add support to FIT images as this is what the Linux kernel look like nowadays. Also increase CFG_SYS_BOOTMAPSZ to 32Mbytes and define CONFIG_SYS_BOOTM_LEN with the same value, otherwise it defaults to 8M which is not sufficient anymore with nowadays Linux kernels. And set the netmask to 255.255.255.0 as a class C address is used. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: FRANJOU Stephane <stephane.franjou@csgroup.eu>
14 lines
862 B
Bash
14 lines
862 B
Bash
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
|
|
sdram_type=SDRAM
|
|
flash_type=AM29LV160DB
|
|
loadaddr=0x1200000
|
|
filename=mcr3000.itb
|
|
dhcp_ip=ip=:::::eth0:dhcp
|
|
console_args=console=ttyCPM0,115200N8
|
|
loadkernel=ubi part nand0;ubifsmount ubi0;ubifsload ${loadaddr} /boot/${filename};ubifsumount; ubi detach
|
|
bootcmd=run flashboot
|
|
flashboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:mcr3k:eth0:off;${ofl_args}; run loadkernel; bootm ${loadaddr}
|
|
tftpboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:mcr3k:eth0:off ${ofl_args}; tftp ${loadaddr} ${filename}; bootm ${loadaddr}
|
|
dhcpboot=dhcp ${loadaddr} ${filename};setenv bootargs ${console_args} ${dhcp_ip} ${ofl_args}; bootm ${loadaddr}
|
|
update=echo 'Updating ubi image'; if tftp 0x2000 $ubifile; then nand erase.chip; nand write 0x2000 0x00 $filesize; fi
|