mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
73894f6938
strncpy() simply bails out when copying a source string whose size exceeds the destination string size, potentially leaving the destination string unterminated. One possible way to address is to pass MDIO_NAME_LEN - 1 and a previously zero-initialized destination string, but this is more difficult to maintain. The chosen alternative is to use strlcpy(), which properly limits the copy len in the (srclen >= size) case to "size - 1", and which is also more efficient than the strncpy() byte-by-byte implementation by using memcpy. The destination string returned by strlcpy() is always NULL terminated. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
1528 lines
36 KiB
C
1528 lines
36 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*/
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/delay.h>
|
|
|
|
/*
|
|
* The u-boot networking stack is a little weird. It seems like the
|
|
* networking core allocates receive buffers up front without any
|
|
* regard to the hardware that's supposed to actually receive those
|
|
* packets.
|
|
*
|
|
* The MACB receives packets into 128-byte receive buffers, so the
|
|
* buffers allocated by the core isn't very practical to use. We'll
|
|
* allocate our own, but we need one such buffer in case a packet
|
|
* wraps around the DMA ring so that we have to copy it.
|
|
*
|
|
* Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
|
|
* configuration header. This way, the core allocates one RX buffer
|
|
* and one TX buffer, each of which can hold a ethernet packet of
|
|
* maximum size.
|
|
*
|
|
* For some reason, the networking core unconditionally specifies a
|
|
* 32-byte packet "alignment" (which really should be called
|
|
* "padding"). MACB shouldn't need that, but we'll refrain from any
|
|
* core modifications here...
|
|
*/
|
|
|
|
#include <net.h>
|
|
#ifndef CONFIG_DM_ETH
|
|
#include <netdev.h>
|
|
#endif
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
|
|
#include <linux/mii.h>
|
|
#include <asm/io.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <linux/errno.h>
|
|
|
|
#include "macb.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* These buffer sizes must be power of 2 and divisible
|
|
* by RX_BUFFER_MULTIPLE
|
|
*/
|
|
#define MACB_RX_BUFFER_SIZE 128
|
|
#define GEM_RX_BUFFER_SIZE 2048
|
|
#define RX_BUFFER_MULTIPLE 64
|
|
|
|
#define MACB_RX_RING_SIZE 32
|
|
#define MACB_TX_RING_SIZE 16
|
|
|
|
#define MACB_TX_TIMEOUT 1000
|
|
#define MACB_AUTONEG_TIMEOUT 5000000
|
|
|
|
#ifdef CONFIG_MACB_ZYNQ
|
|
/* INCR4 AHB bursts */
|
|
#define MACB_ZYNQ_GEM_DMACR_BLENGTH 0x00000004
|
|
/* Use full configured addressable space (8 Kb) */
|
|
#define MACB_ZYNQ_GEM_DMACR_RXSIZE 0x00000300
|
|
/* Use full configured addressable space (4 Kb) */
|
|
#define MACB_ZYNQ_GEM_DMACR_TXSIZE 0x00000400
|
|
/* Set RXBUF with use of 128 byte */
|
|
#define MACB_ZYNQ_GEM_DMACR_RXBUF 0x00020000
|
|
#define MACB_ZYNQ_GEM_DMACR_INIT \
|
|
(MACB_ZYNQ_GEM_DMACR_BLENGTH | \
|
|
MACB_ZYNQ_GEM_DMACR_RXSIZE | \
|
|
MACB_ZYNQ_GEM_DMACR_TXSIZE | \
|
|
MACB_ZYNQ_GEM_DMACR_RXBUF)
|
|
#endif
|
|
|
|
struct macb_dma_desc {
|
|
u32 addr;
|
|
u32 ctrl;
|
|
};
|
|
|
|
struct macb_dma_desc_64 {
|
|
u32 addrh;
|
|
u32 unused;
|
|
};
|
|
|
|
#define HW_DMA_CAP_32B 0
|
|
#define HW_DMA_CAP_64B 1
|
|
|
|
#define DMA_DESC_SIZE 16
|
|
#define DMA_DESC_BYTES(n) ((n) * DMA_DESC_SIZE)
|
|
#define MACB_TX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_TX_RING_SIZE))
|
|
#define MACB_RX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_RX_RING_SIZE))
|
|
#define MACB_TX_DUMMY_DMA_DESC_SIZE (DMA_DESC_BYTES(1))
|
|
|
|
#define RXBUF_FRMLEN_MASK 0x00000fff
|
|
#define TXBUF_FRMLEN_MASK 0x000007ff
|
|
|
|
struct macb_device {
|
|
void *regs;
|
|
|
|
bool is_big_endian;
|
|
|
|
const struct macb_config *config;
|
|
|
|
unsigned int rx_tail;
|
|
unsigned int tx_head;
|
|
unsigned int tx_tail;
|
|
unsigned int next_rx_tail;
|
|
bool wrapped;
|
|
|
|
void *rx_buffer;
|
|
void *tx_buffer;
|
|
struct macb_dma_desc *rx_ring;
|
|
struct macb_dma_desc *tx_ring;
|
|
size_t rx_buffer_size;
|
|
|
|
unsigned long rx_buffer_dma;
|
|
unsigned long rx_ring_dma;
|
|
unsigned long tx_ring_dma;
|
|
|
|
struct macb_dma_desc *dummy_desc;
|
|
unsigned long dummy_desc_dma;
|
|
|
|
const struct device *dev;
|
|
#ifndef CONFIG_DM_ETH
|
|
struct eth_device netdev;
|
|
#endif
|
|
unsigned short phy_addr;
|
|
struct mii_dev *bus;
|
|
#ifdef CONFIG_PHYLIB
|
|
struct phy_device *phydev;
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
#ifdef CONFIG_CLK
|
|
unsigned long pclk_rate;
|
|
#endif
|
|
phy_interface_t phy_interface;
|
|
#endif
|
|
};
|
|
|
|
struct macb_usrio_cfg {
|
|
unsigned int mii;
|
|
unsigned int rmii;
|
|
unsigned int rgmii;
|
|
unsigned int clken;
|
|
};
|
|
|
|
struct macb_config {
|
|
unsigned int dma_burst_length;
|
|
unsigned int hw_dma_cap;
|
|
unsigned int caps;
|
|
|
|
int (*clk_init)(struct udevice *dev, ulong rate);
|
|
const struct macb_usrio_cfg *usrio;
|
|
};
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
|
|
#endif
|
|
|
|
static int macb_is_gem(struct macb_device *macb)
|
|
{
|
|
return MACB_BFEXT(IDNUM, macb_readl(macb, MID)) >= 0x2;
|
|
}
|
|
|
|
#ifndef cpu_is_sama5d2
|
|
#define cpu_is_sama5d2() 0
|
|
#endif
|
|
|
|
#ifndef cpu_is_sama5d4
|
|
#define cpu_is_sama5d4() 0
|
|
#endif
|
|
|
|
static int gem_is_gigabit_capable(struct macb_device *macb)
|
|
{
|
|
/*
|
|
* The GEM controllers embedded in SAMA5D2 and SAMA5D4 are
|
|
* configured to support only 10/100.
|
|
*/
|
|
return macb_is_gem(macb) && !cpu_is_sama5d2() && !cpu_is_sama5d4();
|
|
}
|
|
|
|
static void macb_mdio_write(struct macb_device *macb, u8 phy_adr, u8 reg,
|
|
u16 value)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 1)
|
|
| MACB_BF(PHYA, phy_adr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2)
|
|
| MACB_BF(DATA, value));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
}
|
|
|
|
static u16 macb_mdio_read(struct macb_device *macb, u8 phy_adr, u8 reg)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 2)
|
|
| MACB_BF(PHYA, phy_adr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
frame = macb_readl(macb, MAN);
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
return MACB_BFEXT(DATA, frame);
|
|
}
|
|
|
|
void __weak arch_get_mdio_control(const char *name)
|
|
{
|
|
return;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
|
|
int macb_miiphy_read(struct mii_dev *bus, int phy_adr, int devad, int reg)
|
|
{
|
|
u16 value = 0;
|
|
#ifdef CONFIG_DM_ETH
|
|
struct udevice *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
#else
|
|
struct eth_device *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = to_macb(dev);
|
|
#endif
|
|
|
|
arch_get_mdio_control(bus->name);
|
|
value = macb_mdio_read(macb, phy_adr, reg);
|
|
|
|
return value;
|
|
}
|
|
|
|
int macb_miiphy_write(struct mii_dev *bus, int phy_adr, int devad, int reg,
|
|
u16 value)
|
|
{
|
|
#ifdef CONFIG_DM_ETH
|
|
struct udevice *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
#else
|
|
struct eth_device *dev = eth_get_dev_by_name(bus->name);
|
|
struct macb_device *macb = to_macb(dev);
|
|
#endif
|
|
|
|
arch_get_mdio_control(bus->name);
|
|
macb_mdio_write(macb, phy_adr, reg, value);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define RX 1
|
|
#define TX 0
|
|
static inline void macb_invalidate_ring_desc(struct macb_device *macb, bool rx)
|
|
{
|
|
if (rx)
|
|
invalidate_dcache_range(macb->rx_ring_dma,
|
|
ALIGN(macb->rx_ring_dma + MACB_RX_DMA_DESC_SIZE,
|
|
PKTALIGN));
|
|
else
|
|
invalidate_dcache_range(macb->tx_ring_dma,
|
|
ALIGN(macb->tx_ring_dma + MACB_TX_DMA_DESC_SIZE,
|
|
PKTALIGN));
|
|
}
|
|
|
|
static inline void macb_flush_ring_desc(struct macb_device *macb, bool rx)
|
|
{
|
|
if (rx)
|
|
flush_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
|
|
ALIGN(MACB_RX_DMA_DESC_SIZE, PKTALIGN));
|
|
else
|
|
flush_dcache_range(macb->tx_ring_dma, macb->tx_ring_dma +
|
|
ALIGN(MACB_TX_DMA_DESC_SIZE, PKTALIGN));
|
|
}
|
|
|
|
static inline void macb_flush_rx_buffer(struct macb_device *macb)
|
|
{
|
|
flush_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
|
|
ALIGN(macb->rx_buffer_size * MACB_RX_RING_SIZE,
|
|
PKTALIGN));
|
|
}
|
|
|
|
static inline void macb_invalidate_rx_buffer(struct macb_device *macb)
|
|
{
|
|
invalidate_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
|
|
ALIGN(macb->rx_buffer_size * MACB_RX_RING_SIZE,
|
|
PKTALIGN));
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
|
|
static struct macb_dma_desc_64 *macb_64b_desc(struct macb_dma_desc *desc)
|
|
{
|
|
return (struct macb_dma_desc_64 *)((void *)desc
|
|
+ sizeof(struct macb_dma_desc));
|
|
}
|
|
|
|
static void macb_set_addr(struct macb_device *macb, struct macb_dma_desc *desc,
|
|
ulong addr)
|
|
{
|
|
struct macb_dma_desc_64 *desc_64;
|
|
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B) {
|
|
desc_64 = macb_64b_desc(desc);
|
|
desc_64->addrh = upper_32_bits(addr);
|
|
}
|
|
desc->addr = lower_32_bits(addr);
|
|
}
|
|
|
|
static int _macb_send(struct macb_device *macb, const char *name, void *packet,
|
|
int length)
|
|
{
|
|
unsigned long paddr, ctrl;
|
|
unsigned int tx_head = macb->tx_head;
|
|
int i;
|
|
|
|
paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
|
|
|
|
ctrl = length & TXBUF_FRMLEN_MASK;
|
|
ctrl |= MACB_BIT(TX_LAST);
|
|
if (tx_head == (MACB_TX_RING_SIZE - 1)) {
|
|
ctrl |= MACB_BIT(TX_WRAP);
|
|
macb->tx_head = 0;
|
|
} else {
|
|
macb->tx_head++;
|
|
}
|
|
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B)
|
|
tx_head = tx_head * 2;
|
|
|
|
macb->tx_ring[tx_head].ctrl = ctrl;
|
|
macb_set_addr(macb, &macb->tx_ring[tx_head], paddr);
|
|
|
|
barrier();
|
|
macb_flush_ring_desc(macb, TX);
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
|
|
|
|
/*
|
|
* I guess this is necessary because the networking core may
|
|
* re-use the transmit buffer as soon as we return...
|
|
*/
|
|
for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
|
|
barrier();
|
|
macb_invalidate_ring_desc(macb, TX);
|
|
ctrl = macb->tx_ring[tx_head].ctrl;
|
|
if (ctrl & MACB_BIT(TX_USED))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
|
|
dma_unmap_single(paddr, length, DMA_TO_DEVICE);
|
|
|
|
if (i <= MACB_TX_TIMEOUT) {
|
|
if (ctrl & MACB_BIT(TX_UNDERRUN))
|
|
printf("%s: TX underrun\n", name);
|
|
if (ctrl & MACB_BIT(TX_BUF_EXHAUSTED))
|
|
printf("%s: TX buffers exhausted in mid frame\n", name);
|
|
} else {
|
|
printf("%s: TX timeout\n", name);
|
|
}
|
|
|
|
/* No one cares anyway */
|
|
return 0;
|
|
}
|
|
|
|
static void reclaim_rx_buffers(struct macb_device *macb,
|
|
unsigned int new_tail)
|
|
{
|
|
unsigned int i;
|
|
unsigned int count;
|
|
|
|
i = macb->rx_tail;
|
|
|
|
macb_invalidate_ring_desc(macb, RX);
|
|
while (i > new_tail) {
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B)
|
|
count = i * 2;
|
|
else
|
|
count = i;
|
|
macb->rx_ring[count].addr &= ~MACB_BIT(RX_USED);
|
|
i++;
|
|
if (i > MACB_RX_RING_SIZE)
|
|
i = 0;
|
|
}
|
|
|
|
while (i < new_tail) {
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B)
|
|
count = i * 2;
|
|
else
|
|
count = i;
|
|
macb->rx_ring[count].addr &= ~MACB_BIT(RX_USED);
|
|
i++;
|
|
}
|
|
|
|
barrier();
|
|
macb_flush_ring_desc(macb, RX);
|
|
macb->rx_tail = new_tail;
|
|
}
|
|
|
|
static int _macb_recv(struct macb_device *macb, uchar **packetp)
|
|
{
|
|
unsigned int next_rx_tail = macb->next_rx_tail;
|
|
void *buffer;
|
|
int length;
|
|
u32 status;
|
|
u8 flag = false;
|
|
|
|
macb->wrapped = false;
|
|
for (;;) {
|
|
macb_invalidate_ring_desc(macb, RX);
|
|
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B)
|
|
next_rx_tail = next_rx_tail * 2;
|
|
|
|
if (!(macb->rx_ring[next_rx_tail].addr & MACB_BIT(RX_USED)))
|
|
return -EAGAIN;
|
|
|
|
status = macb->rx_ring[next_rx_tail].ctrl;
|
|
if (status & MACB_BIT(RX_SOF)) {
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B) {
|
|
next_rx_tail = next_rx_tail / 2;
|
|
flag = true;
|
|
}
|
|
|
|
if (next_rx_tail != macb->rx_tail)
|
|
reclaim_rx_buffers(macb, next_rx_tail);
|
|
macb->wrapped = false;
|
|
}
|
|
|
|
if (status & MACB_BIT(RX_EOF)) {
|
|
buffer = macb->rx_buffer +
|
|
macb->rx_buffer_size * macb->rx_tail;
|
|
length = status & RXBUF_FRMLEN_MASK;
|
|
|
|
macb_invalidate_rx_buffer(macb);
|
|
if (macb->wrapped) {
|
|
unsigned int headlen, taillen;
|
|
|
|
headlen = macb->rx_buffer_size *
|
|
(MACB_RX_RING_SIZE - macb->rx_tail);
|
|
taillen = length - headlen;
|
|
memcpy((void *)net_rx_packets[0],
|
|
buffer, headlen);
|
|
memcpy((void *)net_rx_packets[0] + headlen,
|
|
macb->rx_buffer, taillen);
|
|
*packetp = (void *)net_rx_packets[0];
|
|
} else {
|
|
*packetp = buffer;
|
|
}
|
|
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B) {
|
|
if (!flag)
|
|
next_rx_tail = next_rx_tail / 2;
|
|
}
|
|
|
|
if (++next_rx_tail >= MACB_RX_RING_SIZE)
|
|
next_rx_tail = 0;
|
|
macb->next_rx_tail = next_rx_tail;
|
|
return length;
|
|
} else {
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B) {
|
|
if (!flag)
|
|
next_rx_tail = next_rx_tail / 2;
|
|
flag = false;
|
|
}
|
|
|
|
if (++next_rx_tail >= MACB_RX_RING_SIZE) {
|
|
macb->wrapped = true;
|
|
next_rx_tail = 0;
|
|
}
|
|
}
|
|
barrier();
|
|
}
|
|
}
|
|
|
|
static void macb_phy_reset(struct macb_device *macb, const char *name)
|
|
{
|
|
int i;
|
|
u16 status, adv;
|
|
|
|
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
|
|
macb_mdio_write(macb, macb->phy_addr, MII_ADVERTISE, adv);
|
|
printf("%s: Starting autonegotiation...\n", name);
|
|
macb_mdio_write(macb, macb->phy_addr, MII_BMCR, (BMCR_ANENABLE
|
|
| BMCR_ANRESTART));
|
|
|
|
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, macb->phy_addr, MII_BMSR);
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
printf("%s: Autonegotiation complete\n", name);
|
|
else
|
|
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
|
|
name, status);
|
|
}
|
|
|
|
static int macb_phy_find(struct macb_device *macb, const char *name)
|
|
{
|
|
int i;
|
|
u16 phy_id;
|
|
|
|
phy_id = macb_mdio_read(macb, macb->phy_addr, MII_PHYSID1);
|
|
if (phy_id != 0xffff) {
|
|
printf("%s: PHY present at %d\n", name, macb->phy_addr);
|
|
return 0;
|
|
}
|
|
|
|
/* Search for PHY... */
|
|
for (i = 0; i < 32; i++) {
|
|
macb->phy_addr = i;
|
|
phy_id = macb_mdio_read(macb, macb->phy_addr, MII_PHYSID1);
|
|
if (phy_id != 0xffff) {
|
|
printf("%s: PHY present at %d\n", name, i);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* PHY isn't up to snuff */
|
|
printf("%s: PHY not found\n", name);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* macb_linkspd_cb - Linkspeed change callback function
|
|
* @dev/@regs: MACB udevice (DM version) or
|
|
* Base Register of MACB devices (non-DM version)
|
|
* @speed: Linkspeed
|
|
* Returns 0 when operation success and negative errno number
|
|
* when operation failed.
|
|
*/
|
|
#ifdef CONFIG_DM_ETH
|
|
static int macb_sifive_clk_init(struct udevice *dev, ulong rate)
|
|
{
|
|
fdt_addr_t addr;
|
|
void *gemgxl_regs;
|
|
|
|
addr = dev_read_addr_index(dev, 1);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -ENODEV;
|
|
|
|
gemgxl_regs = (void __iomem *)addr;
|
|
if (!gemgxl_regs)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* SiFive GEMGXL TX clock operation mode:
|
|
*
|
|
* 0 = GMII mode. Use 125 MHz gemgxlclk from PRCI in TX logic
|
|
* and output clock on GMII output signal GTX_CLK
|
|
* 1 = MII mode. Use MII input signal TX_CLK in TX logic
|
|
*/
|
|
writel(rate != 125000000, gemgxl_regs);
|
|
return 0;
|
|
}
|
|
|
|
static int macb_sama7g5_clk_init(struct udevice *dev, ulong rate)
|
|
{
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
ret = clk_get_by_name(dev, "tx_clk", &clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* This is for using GCK. Clock rate is addressed via assigned-clock
|
|
* property, so only clock enable is needed here. The switching to
|
|
* proper clock rate depending on link speed is managed by IP logic.
|
|
*/
|
|
return clk_enable(&clk);
|
|
}
|
|
|
|
int __weak macb_linkspd_cb(struct udevice *dev, unsigned int speed)
|
|
{
|
|
#ifdef CONFIG_CLK
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
struct clk tx_clk;
|
|
ulong rate;
|
|
int ret;
|
|
|
|
switch (speed) {
|
|
case _10BASET:
|
|
rate = 2500000; /* 2.5 MHz */
|
|
break;
|
|
case _100BASET:
|
|
rate = 25000000; /* 25 MHz */
|
|
break;
|
|
case _1000BASET:
|
|
rate = 125000000; /* 125 MHz */
|
|
break;
|
|
default:
|
|
/* does not change anything */
|
|
return 0;
|
|
}
|
|
|
|
if (macb->config->clk_init)
|
|
return macb->config->clk_init(dev, rate);
|
|
|
|
/*
|
|
* "tx_clk" is an optional clock source for MACB.
|
|
* Ignore if it does not exist in DT.
|
|
*/
|
|
ret = clk_get_by_name(dev, "tx_clk", &tx_clk);
|
|
if (ret)
|
|
return 0;
|
|
|
|
if (tx_clk.dev) {
|
|
ret = clk_set_rate(&tx_clk, rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
int __weak macb_linkspd_cb(void *regs, unsigned int speed)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int macb_phy_init(struct udevice *dev, const char *name)
|
|
#else
|
|
static int macb_phy_init(struct macb_device *macb, const char *name)
|
|
#endif
|
|
{
|
|
#ifdef CONFIG_DM_ETH
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
#endif
|
|
u32 ncfgr;
|
|
u16 phy_id, status, adv, lpa;
|
|
int media, speed, duplex;
|
|
int ret;
|
|
int i;
|
|
|
|
arch_get_mdio_control(name);
|
|
/* Auto-detect phy_addr */
|
|
ret = macb_phy_find(macb, name);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check if the PHY is up to snuff... */
|
|
phy_id = macb_mdio_read(macb, macb->phy_addr, MII_PHYSID1);
|
|
if (phy_id == 0xffff) {
|
|
printf("%s: No PHY present\n", name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
#ifdef CONFIG_DM_ETH
|
|
macb->phydev = phy_connect(macb->bus, macb->phy_addr, dev,
|
|
macb->phy_interface);
|
|
#else
|
|
/* need to consider other phy interface mode */
|
|
macb->phydev = phy_connect(macb->bus, macb->phy_addr, &macb->netdev,
|
|
PHY_INTERFACE_MODE_RGMII);
|
|
#endif
|
|
if (!macb->phydev) {
|
|
printf("phy_connect failed\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy_config(macb->phydev);
|
|
#endif
|
|
|
|
status = macb_mdio_read(macb, macb->phy_addr, MII_BMSR);
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
/* Try to re-negotiate if we don't have link already. */
|
|
macb_phy_reset(macb, name);
|
|
|
|
for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, macb->phy_addr, MII_BMSR);
|
|
if (status & BMSR_LSTATUS) {
|
|
/*
|
|
* Delay a bit after the link is established,
|
|
* so that the next xfer does not fail
|
|
*/
|
|
mdelay(10);
|
|
break;
|
|
}
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
printf("%s: link down (status: 0x%04x)\n",
|
|
name, status);
|
|
return -ENETDOWN;
|
|
}
|
|
|
|
/* First check for GMAC and that it is GiB capable */
|
|
if (gem_is_gigabit_capable(macb)) {
|
|
lpa = macb_mdio_read(macb, macb->phy_addr, MII_STAT1000);
|
|
|
|
if (lpa & (LPA_1000FULL | LPA_1000HALF | LPA_1000XFULL |
|
|
LPA_1000XHALF)) {
|
|
duplex = ((lpa & (LPA_1000FULL | LPA_1000XFULL)) ?
|
|
1 : 0);
|
|
|
|
printf("%s: link up, 1000Mbps %s-duplex (lpa: 0x%04x)\n",
|
|
name,
|
|
duplex ? "full" : "half",
|
|
lpa);
|
|
|
|
ncfgr = macb_readl(macb, NCFGR);
|
|
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
|
|
ncfgr |= GEM_BIT(GBE);
|
|
|
|
if (duplex)
|
|
ncfgr |= MACB_BIT(FD);
|
|
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
ret = macb_linkspd_cb(dev, _1000BASET);
|
|
#else
|
|
ret = macb_linkspd_cb(macb->regs, _1000BASET);
|
|
#endif
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* fall back for EMAC checking */
|
|
adv = macb_mdio_read(macb, macb->phy_addr, MII_ADVERTISE);
|
|
lpa = macb_mdio_read(macb, macb->phy_addr, MII_LPA);
|
|
media = mii_nway_result(lpa & adv);
|
|
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
|
|
? 1 : 0);
|
|
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
|
|
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
|
|
name,
|
|
speed ? "100" : "10",
|
|
duplex ? "full" : "half",
|
|
lpa);
|
|
|
|
ncfgr = macb_readl(macb, NCFGR);
|
|
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD) | GEM_BIT(GBE));
|
|
if (speed) {
|
|
ncfgr |= MACB_BIT(SPD);
|
|
#ifdef CONFIG_DM_ETH
|
|
ret = macb_linkspd_cb(dev, _100BASET);
|
|
#else
|
|
ret = macb_linkspd_cb(macb->regs, _100BASET);
|
|
#endif
|
|
} else {
|
|
#ifdef CONFIG_DM_ETH
|
|
ret = macb_linkspd_cb(dev, _10BASET);
|
|
#else
|
|
ret = macb_linkspd_cb(macb->regs, _10BASET);
|
|
#endif
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (duplex)
|
|
ncfgr |= MACB_BIT(FD);
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gmac_init_multi_queues(struct macb_device *macb)
|
|
{
|
|
int i, num_queues = 1;
|
|
u32 queue_mask;
|
|
unsigned long paddr;
|
|
|
|
/* bit 0 is never set but queue 0 always exists */
|
|
queue_mask = gem_readl(macb, DCFG6) & 0xff;
|
|
queue_mask |= 0x1;
|
|
|
|
for (i = 1; i < MACB_MAX_QUEUES; i++)
|
|
if (queue_mask & (1 << i))
|
|
num_queues++;
|
|
|
|
macb->dummy_desc->ctrl = MACB_BIT(TX_USED);
|
|
macb->dummy_desc->addr = 0;
|
|
flush_dcache_range(macb->dummy_desc_dma, macb->dummy_desc_dma +
|
|
ALIGN(MACB_TX_DUMMY_DMA_DESC_SIZE, PKTALIGN));
|
|
paddr = macb->dummy_desc_dma;
|
|
|
|
for (i = 1; i < num_queues; i++) {
|
|
gem_writel_queue_TBQP(macb, lower_32_bits(paddr), i - 1);
|
|
gem_writel_queue_RBQP(macb, lower_32_bits(paddr), i - 1);
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B) {
|
|
gem_writel_queue_TBQPH(macb, upper_32_bits(paddr),
|
|
i - 1);
|
|
gem_writel_queue_RBQPH(macb, upper_32_bits(paddr),
|
|
i - 1);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void gmac_configure_dma(struct macb_device *macb)
|
|
{
|
|
u32 buffer_size;
|
|
u32 dmacfg;
|
|
|
|
buffer_size = macb->rx_buffer_size / RX_BUFFER_MULTIPLE;
|
|
dmacfg = gem_readl(macb, DMACFG) & ~GEM_BF(RXBS, -1L);
|
|
dmacfg |= GEM_BF(RXBS, buffer_size);
|
|
|
|
if (macb->config->dma_burst_length)
|
|
dmacfg = GEM_BFINS(FBLDO,
|
|
macb->config->dma_burst_length, dmacfg);
|
|
|
|
dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L);
|
|
dmacfg &= ~GEM_BIT(ENDIA_PKT);
|
|
|
|
if (macb->is_big_endian)
|
|
dmacfg |= GEM_BIT(ENDIA_DESC); /* CPU in big endian */
|
|
else
|
|
dmacfg &= ~GEM_BIT(ENDIA_DESC);
|
|
|
|
dmacfg &= ~GEM_BIT(ADDR64);
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B)
|
|
dmacfg |= GEM_BIT(ADDR64);
|
|
|
|
gem_writel(macb, DMACFG, dmacfg);
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int _macb_init(struct udevice *dev, const char *name)
|
|
#else
|
|
static int _macb_init(struct macb_device *macb, const char *name)
|
|
#endif
|
|
{
|
|
#ifdef CONFIG_DM_ETH
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
unsigned int val = 0;
|
|
#endif
|
|
unsigned long paddr;
|
|
int ret;
|
|
int i;
|
|
int count;
|
|
|
|
/*
|
|
* macb_halt should have been called at some point before now,
|
|
* so we'll assume the controller is idle.
|
|
*/
|
|
|
|
/* initialize DMA descriptors */
|
|
paddr = macb->rx_buffer_dma;
|
|
for (i = 0; i < MACB_RX_RING_SIZE; i++) {
|
|
if (i == (MACB_RX_RING_SIZE - 1))
|
|
paddr |= MACB_BIT(RX_WRAP);
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B)
|
|
count = i * 2;
|
|
else
|
|
count = i;
|
|
macb->rx_ring[count].ctrl = 0;
|
|
macb_set_addr(macb, &macb->rx_ring[count], paddr);
|
|
paddr += macb->rx_buffer_size;
|
|
}
|
|
macb_flush_ring_desc(macb, RX);
|
|
macb_flush_rx_buffer(macb);
|
|
|
|
for (i = 0; i < MACB_TX_RING_SIZE; i++) {
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B)
|
|
count = i * 2;
|
|
else
|
|
count = i;
|
|
macb_set_addr(macb, &macb->tx_ring[count], 0);
|
|
if (i == (MACB_TX_RING_SIZE - 1))
|
|
macb->tx_ring[count].ctrl = MACB_BIT(TX_USED) |
|
|
MACB_BIT(TX_WRAP);
|
|
else
|
|
macb->tx_ring[count].ctrl = MACB_BIT(TX_USED);
|
|
}
|
|
macb_flush_ring_desc(macb, TX);
|
|
|
|
macb->rx_tail = 0;
|
|
macb->tx_head = 0;
|
|
macb->tx_tail = 0;
|
|
macb->next_rx_tail = 0;
|
|
|
|
#ifdef CONFIG_MACB_ZYNQ
|
|
gem_writel(macb, DMACFG, MACB_ZYNQ_GEM_DMACR_INIT);
|
|
#endif
|
|
|
|
macb_writel(macb, RBQP, lower_32_bits(macb->rx_ring_dma));
|
|
macb_writel(macb, TBQP, lower_32_bits(macb->tx_ring_dma));
|
|
if (macb->config->hw_dma_cap & HW_DMA_CAP_64B) {
|
|
macb_writel(macb, RBQPH, upper_32_bits(macb->rx_ring_dma));
|
|
macb_writel(macb, TBQPH, upper_32_bits(macb->tx_ring_dma));
|
|
}
|
|
|
|
if (macb_is_gem(macb)) {
|
|
/* Initialize DMA properties */
|
|
gmac_configure_dma(macb);
|
|
/* Check the multi queue and initialize the queue for tx */
|
|
gmac_init_multi_queues(macb);
|
|
|
|
/*
|
|
* When the GMAC IP with GE feature, this bit is used to
|
|
* select interface between RGMII and GMII.
|
|
* When the GMAC IP without GE feature, this bit is used
|
|
* to select interface between RMII and MII.
|
|
*/
|
|
#ifdef CONFIG_DM_ETH
|
|
if (macb->phy_interface == PHY_INTERFACE_MODE_RGMII ||
|
|
macb->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
macb->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID ||
|
|
macb->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
val = macb->config->usrio->rgmii;
|
|
else if (macb->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
val = macb->config->usrio->rmii;
|
|
else if (macb->phy_interface == PHY_INTERFACE_MODE_MII)
|
|
val = macb->config->usrio->mii;
|
|
|
|
if (macb->config->caps & MACB_CAPS_USRIO_HAS_CLKEN)
|
|
val |= macb->config->usrio->clken;
|
|
|
|
gem_writel(macb, USRIO, val);
|
|
|
|
if (macb->phy_interface == PHY_INTERFACE_MODE_SGMII) {
|
|
unsigned int ncfgr = macb_readl(macb, NCFGR);
|
|
|
|
ncfgr |= GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL);
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
}
|
|
#else
|
|
#if defined(CONFIG_RGMII) || defined(CONFIG_RMII)
|
|
gem_writel(macb, USRIO, macb->config->usrio->rgmii);
|
|
#else
|
|
gem_writel(macb, USRIO, 0);
|
|
#endif
|
|
#endif
|
|
} else {
|
|
/* choose RMII or MII mode. This depends on the board */
|
|
#ifdef CONFIG_DM_ETH
|
|
#ifdef CONFIG_AT91FAMILY
|
|
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII) {
|
|
macb_writel(macb, USRIO,
|
|
macb->config->usrio->rmii |
|
|
macb->config->usrio->clken);
|
|
} else {
|
|
macb_writel(macb, USRIO, macb->config->usrio->clken);
|
|
}
|
|
#else
|
|
if (macb->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
macb_writel(macb, USRIO, 0);
|
|
else
|
|
macb_writel(macb, USRIO, macb->config->usrio->mii);
|
|
#endif
|
|
#else
|
|
#ifdef CONFIG_RMII
|
|
#ifdef CONFIG_AT91FAMILY
|
|
macb_writel(macb, USRIO, macb->config->usrio->rmii |
|
|
macb->config->usrio->clken);
|
|
#else
|
|
macb_writel(macb, USRIO, 0);
|
|
#endif
|
|
#else
|
|
#ifdef CONFIG_AT91FAMILY
|
|
macb_writel(macb, USRIO, macb->config->usrio->clken);
|
|
#else
|
|
macb_writel(macb, USRIO, macb->config->usrio->mii);
|
|
#endif
|
|
#endif /* CONFIG_RMII */
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
ret = macb_phy_init(dev, name);
|
|
#else
|
|
ret = macb_phy_init(macb, name);
|
|
#endif
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable TX and RX */
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void _macb_halt(struct macb_device *macb)
|
|
{
|
|
u32 ncr, tsr;
|
|
|
|
/* Halt the controller and wait for any ongoing transmission to end. */
|
|
ncr = macb_readl(macb, NCR);
|
|
ncr |= MACB_BIT(THALT);
|
|
macb_writel(macb, NCR, ncr);
|
|
|
|
do {
|
|
tsr = macb_readl(macb, TSR);
|
|
} while (tsr & MACB_BIT(TGO));
|
|
|
|
/* Disable TX and RX, and clear statistics */
|
|
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
|
|
}
|
|
|
|
static int _macb_write_hwaddr(struct macb_device *macb, unsigned char *enetaddr)
|
|
{
|
|
u32 hwaddr_bottom;
|
|
u16 hwaddr_top;
|
|
|
|
/* set hardware address */
|
|
hwaddr_bottom = enetaddr[0] | enetaddr[1] << 8 |
|
|
enetaddr[2] << 16 | enetaddr[3] << 24;
|
|
macb_writel(macb, SA1B, hwaddr_bottom);
|
|
hwaddr_top = enetaddr[4] | enetaddr[5] << 8;
|
|
macb_writel(macb, SA1T, hwaddr_top);
|
|
return 0;
|
|
}
|
|
|
|
static u32 macb_mdc_clk_div(int id, struct macb_device *macb)
|
|
{
|
|
u32 config;
|
|
#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
|
|
unsigned long macb_hz = macb->pclk_rate;
|
|
#else
|
|
unsigned long macb_hz = get_macb_pclk_rate(id);
|
|
#endif
|
|
|
|
if (macb_hz < 20000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV8);
|
|
else if (macb_hz < 40000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV16);
|
|
else if (macb_hz < 80000000)
|
|
config = MACB_BF(CLK, MACB_CLK_DIV32);
|
|
else
|
|
config = MACB_BF(CLK, MACB_CLK_DIV64);
|
|
|
|
return config;
|
|
}
|
|
|
|
static u32 gem_mdc_clk_div(int id, struct macb_device *macb)
|
|
{
|
|
u32 config;
|
|
|
|
#if defined(CONFIG_DM_ETH) && defined(CONFIG_CLK)
|
|
unsigned long macb_hz = macb->pclk_rate;
|
|
#else
|
|
unsigned long macb_hz = get_macb_pclk_rate(id);
|
|
#endif
|
|
|
|
if (macb_hz < 20000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV8);
|
|
else if (macb_hz < 40000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV16);
|
|
else if (macb_hz < 80000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV32);
|
|
else if (macb_hz < 120000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV48);
|
|
else if (macb_hz < 160000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV64);
|
|
else if (macb_hz < 240000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV96);
|
|
else if (macb_hz < 320000000)
|
|
config = GEM_BF(CLK, GEM_CLK_DIV128);
|
|
else
|
|
config = GEM_BF(CLK, GEM_CLK_DIV224);
|
|
|
|
return config;
|
|
}
|
|
|
|
/*
|
|
* Get the DMA bus width field of the network configuration register that we
|
|
* should program. We find the width from decoding the design configuration
|
|
* register to find the maximum supported data bus width.
|
|
*/
|
|
static u32 macb_dbw(struct macb_device *macb)
|
|
{
|
|
switch (GEM_BFEXT(DBWDEF, gem_readl(macb, DCFG1))) {
|
|
case 4:
|
|
return GEM_BF(DBW, GEM_DBW128);
|
|
case 2:
|
|
return GEM_BF(DBW, GEM_DBW64);
|
|
case 1:
|
|
default:
|
|
return GEM_BF(DBW, GEM_DBW32);
|
|
}
|
|
}
|
|
|
|
static void _macb_eth_initialize(struct macb_device *macb)
|
|
{
|
|
int id = 0; /* This is not used by functions we call */
|
|
u32 ncfgr;
|
|
|
|
if (macb_is_gem(macb))
|
|
macb->rx_buffer_size = GEM_RX_BUFFER_SIZE;
|
|
else
|
|
macb->rx_buffer_size = MACB_RX_BUFFER_SIZE;
|
|
|
|
/* TODO: we need check the rx/tx_ring_dma is dcache line aligned */
|
|
macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size *
|
|
MACB_RX_RING_SIZE,
|
|
&macb->rx_buffer_dma);
|
|
macb->rx_ring = dma_alloc_coherent(MACB_RX_DMA_DESC_SIZE,
|
|
&macb->rx_ring_dma);
|
|
macb->tx_ring = dma_alloc_coherent(MACB_TX_DMA_DESC_SIZE,
|
|
&macb->tx_ring_dma);
|
|
macb->dummy_desc = dma_alloc_coherent(MACB_TX_DUMMY_DMA_DESC_SIZE,
|
|
&macb->dummy_desc_dma);
|
|
|
|
/*
|
|
* Do some basic initialization so that we at least can talk
|
|
* to the PHY
|
|
*/
|
|
if (macb_is_gem(macb)) {
|
|
ncfgr = gem_mdc_clk_div(id, macb);
|
|
ncfgr |= macb_dbw(macb);
|
|
} else {
|
|
ncfgr = macb_mdc_clk_div(id, macb);
|
|
}
|
|
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
static int macb_send(struct eth_device *netdev, void *packet, int length)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_send(macb, netdev->name, packet, length);
|
|
}
|
|
|
|
static int macb_recv(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
uchar *packet;
|
|
int length;
|
|
|
|
macb->wrapped = false;
|
|
for (;;) {
|
|
macb->next_rx_tail = macb->rx_tail;
|
|
length = _macb_recv(macb, &packet);
|
|
if (length >= 0) {
|
|
net_process_received_packet(packet, length);
|
|
reclaim_rx_buffers(macb, macb->next_rx_tail);
|
|
} else {
|
|
return length;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int macb_init(struct eth_device *netdev, struct bd_info *bd)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_init(macb, netdev->name);
|
|
}
|
|
|
|
static void macb_halt(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_halt(macb);
|
|
}
|
|
|
|
static int macb_write_hwaddr(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
|
|
return _macb_write_hwaddr(macb, netdev->enetaddr);
|
|
}
|
|
|
|
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
|
|
{
|
|
struct macb_device *macb;
|
|
struct eth_device *netdev;
|
|
|
|
macb = malloc(sizeof(struct macb_device));
|
|
if (!macb) {
|
|
printf("Error: Failed to allocate memory for MACB%d\n", id);
|
|
return -1;
|
|
}
|
|
memset(macb, 0, sizeof(struct macb_device));
|
|
|
|
netdev = &macb->netdev;
|
|
|
|
macb->regs = regs;
|
|
macb->phy_addr = phy_addr;
|
|
|
|
if (macb_is_gem(macb))
|
|
sprintf(netdev->name, "gmac%d", id);
|
|
else
|
|
sprintf(netdev->name, "macb%d", id);
|
|
|
|
netdev->init = macb_init;
|
|
netdev->halt = macb_halt;
|
|
netdev->send = macb_send;
|
|
netdev->recv = macb_recv;
|
|
netdev->write_hwaddr = macb_write_hwaddr;
|
|
|
|
_macb_eth_initialize(macb);
|
|
|
|
eth_register(netdev);
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
int retval;
|
|
struct mii_dev *mdiodev = mdio_alloc();
|
|
if (!mdiodev)
|
|
return -ENOMEM;
|
|
strlcpy(mdiodev->name, netdev->name, MDIO_NAME_LEN);
|
|
mdiodev->read = macb_miiphy_read;
|
|
mdiodev->write = macb_miiphy_write;
|
|
|
|
retval = mdio_register(mdiodev);
|
|
if (retval < 0)
|
|
return retval;
|
|
macb->bus = miiphy_get_dev_by_name(netdev->name);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif /* !CONFIG_DM_ETH */
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
|
|
static int macb_start(struct udevice *dev)
|
|
{
|
|
return _macb_init(dev, dev->name);
|
|
}
|
|
|
|
static int macb_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
return _macb_send(macb, dev->name, packet, length);
|
|
}
|
|
|
|
static int macb_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
macb->next_rx_tail = macb->rx_tail;
|
|
macb->wrapped = false;
|
|
|
|
return _macb_recv(macb, packetp);
|
|
}
|
|
|
|
static int macb_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
reclaim_rx_buffers(macb, macb->next_rx_tail);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void macb_stop(struct udevice *dev)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
_macb_halt(macb);
|
|
}
|
|
|
|
static int macb_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *plat = dev_get_plat(dev);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
return _macb_write_hwaddr(macb, plat->enetaddr);
|
|
}
|
|
|
|
static const struct eth_ops macb_eth_ops = {
|
|
.start = macb_start,
|
|
.send = macb_send,
|
|
.recv = macb_recv,
|
|
.stop = macb_stop,
|
|
.free_pkt = macb_free_pkt,
|
|
.write_hwaddr = macb_write_hwaddr,
|
|
};
|
|
|
|
#ifdef CONFIG_CLK
|
|
static int macb_enable_clk(struct udevice *dev)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
struct clk clk;
|
|
ulong clk_rate;
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* If clock driver didn't support enable or disable then
|
|
* we get -ENOSYS from clk_enable(). To handle this, we
|
|
* don't fail for ret == -ENOSYS.
|
|
*/
|
|
ret = clk_enable(&clk);
|
|
if (ret && ret != -ENOSYS)
|
|
return ret;
|
|
|
|
clk_rate = clk_get_rate(&clk);
|
|
if (!clk_rate)
|
|
return -EINVAL;
|
|
|
|
macb->pclk_rate = clk_rate;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct macb_usrio_cfg macb_default_usrio = {
|
|
.mii = MACB_BIT(MII),
|
|
.rmii = MACB_BIT(RMII),
|
|
.rgmii = GEM_BIT(RGMII),
|
|
.clken = MACB_BIT(CLKEN),
|
|
};
|
|
|
|
static const struct macb_config default_gem_config = {
|
|
.dma_burst_length = 16,
|
|
.hw_dma_cap = HW_DMA_CAP_32B,
|
|
.clk_init = NULL,
|
|
.usrio = &macb_default_usrio,
|
|
};
|
|
|
|
static int macb_eth_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
struct ofnode_phandle_args phandle_args;
|
|
const char *phy_mode;
|
|
int ret;
|
|
|
|
phy_mode = dev_read_prop(dev, "phy-mode", NULL);
|
|
|
|
if (phy_mode)
|
|
macb->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
if (macb->phy_interface == -1) {
|
|
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Read phyaddr from DT */
|
|
if (!dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
|
|
&phandle_args))
|
|
macb->phy_addr = ofnode_read_u32_default(phandle_args.node,
|
|
"reg", -1);
|
|
|
|
macb->regs = (void *)pdata->iobase;
|
|
|
|
macb->is_big_endian = (cpu_to_be32(0x12345678) == 0x12345678);
|
|
|
|
macb->config = (struct macb_config *)dev_get_driver_data(dev);
|
|
if (!macb->config)
|
|
macb->config = &default_gem_config;
|
|
|
|
#ifdef CONFIG_CLK
|
|
ret = macb_enable_clk(dev);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
_macb_eth_initialize(macb);
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
|
|
macb->bus = mdio_alloc();
|
|
if (!macb->bus)
|
|
return -ENOMEM;
|
|
strlcpy(macb->bus->name, dev->name, MDIO_NAME_LEN);
|
|
macb->bus->read = macb_miiphy_read;
|
|
macb->bus->write = macb_miiphy_write;
|
|
|
|
ret = mdio_register(macb->bus);
|
|
if (ret < 0)
|
|
return ret;
|
|
macb->bus = miiphy_get_dev_by_name(dev->name);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int macb_eth_remove(struct udevice *dev)
|
|
{
|
|
struct macb_device *macb = dev_get_priv(dev);
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
free(macb->phydev);
|
|
#endif
|
|
mdio_unregister(macb->bus);
|
|
mdio_free(macb->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* macb_late_eth_of_to_plat
|
|
* @dev: udevice struct
|
|
* Returns 0 when operation success and negative errno number
|
|
* when operation failed.
|
|
*/
|
|
int __weak macb_late_eth_of_to_plat(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int macb_eth_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
|
|
pdata->iobase = (phys_addr_t)dev_remap_addr(dev);
|
|
if (!pdata->iobase)
|
|
return -EINVAL;
|
|
|
|
return macb_late_eth_of_to_plat(dev);
|
|
}
|
|
|
|
static const struct macb_usrio_cfg sama7g5_usrio = {
|
|
.mii = 0,
|
|
.rmii = 1,
|
|
.rgmii = 2,
|
|
.clken = BIT(2),
|
|
};
|
|
|
|
static const struct macb_config microchip_config = {
|
|
.dma_burst_length = 16,
|
|
.hw_dma_cap = HW_DMA_CAP_64B,
|
|
.clk_init = NULL,
|
|
.usrio = &macb_default_usrio,
|
|
};
|
|
|
|
static const struct macb_config sama5d4_config = {
|
|
.dma_burst_length = 4,
|
|
.hw_dma_cap = HW_DMA_CAP_32B,
|
|
.clk_init = NULL,
|
|
.usrio = &macb_default_usrio,
|
|
};
|
|
|
|
static const struct macb_config sifive_config = {
|
|
.dma_burst_length = 16,
|
|
.hw_dma_cap = HW_DMA_CAP_32B,
|
|
.clk_init = macb_sifive_clk_init,
|
|
.usrio = &macb_default_usrio,
|
|
};
|
|
|
|
static const struct macb_config sama7g5_gmac_config = {
|
|
.dma_burst_length = 16,
|
|
.hw_dma_cap = HW_DMA_CAP_32B,
|
|
.clk_init = macb_sama7g5_clk_init,
|
|
.usrio = &sama7g5_usrio,
|
|
};
|
|
|
|
static const struct macb_config sama7g5_emac_config = {
|
|
.caps = MACB_CAPS_USRIO_HAS_CLKEN,
|
|
.dma_burst_length = 16,
|
|
.hw_dma_cap = HW_DMA_CAP_32B,
|
|
.usrio = &sama7g5_usrio,
|
|
};
|
|
|
|
static const struct udevice_id macb_eth_ids[] = {
|
|
{ .compatible = "cdns,macb" },
|
|
{ .compatible = "cdns,at91sam9260-macb" },
|
|
{ .compatible = "cdns,sam9x60-macb" },
|
|
{ .compatible = "cdns,sama7g5-gem",
|
|
.data = (ulong)&sama7g5_gmac_config },
|
|
{ .compatible = "cdns,sama7g5-emac",
|
|
.data = (ulong)&sama7g5_emac_config },
|
|
{ .compatible = "atmel,sama5d2-gem" },
|
|
{ .compatible = "atmel,sama5d3-gem" },
|
|
{ .compatible = "atmel,sama5d4-gem", .data = (ulong)&sama5d4_config },
|
|
{ .compatible = "cdns,zynq-gem" },
|
|
{ .compatible = "sifive,fu540-c000-gem",
|
|
.data = (ulong)&sifive_config },
|
|
{ .compatible = "microchip,mpfs-mss-gem",
|
|
.data = (ulong)µchip_config },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_macb) = {
|
|
.name = "eth_macb",
|
|
.id = UCLASS_ETH,
|
|
.of_match = macb_eth_ids,
|
|
.of_to_plat = macb_eth_of_to_plat,
|
|
.probe = macb_eth_probe,
|
|
.remove = macb_eth_remove,
|
|
.ops = &macb_eth_ops,
|
|
.priv_auto = sizeof(struct macb_device),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|
|
#endif
|
|
|
|
#endif
|