mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 15:14:43 +00:00
21c1502a4a
The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
50 lines
1.2 KiB
Text
50 lines
1.2 KiB
Text
CONFIG_PPC=y
|
|
CONFIG_SYS_TEXT_BASE=0xFEF00000
|
|
CONFIG_SYS_CLK_FREQ=66666666
|
|
CONFIG_MPC83xx=y
|
|
CONFIG_TARGET_MPC8349ITX=y
|
|
CONFIG_DDR_MC_CLOCK_MODE_1_1=y
|
|
CONFIG_SYSTEM_PLL_FACTOR_4_1=y
|
|
CONFIG_CORE_PLL_RATIO_2_1=y
|
|
CONFIG_PCI_HOST_MODE_ENABLE=y
|
|
CONFIG_PCI_INT_ARBITER1_ENABLE=y
|
|
CONFIG_PCI_INT_ARBITER2_ENABLE=y
|
|
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
|
|
CONFIG_TSEC1_MODE_GMII=y
|
|
CONFIG_TSEC2_MODE_GMII=y
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
CONFIG_BOOTDELAY=6
|
|
CONFIG_USE_BOOTARGS=y
|
|
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200"
|
|
CONFIG_MISC_INIT_R=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_SYS_PROMPT="MPC8349E-mITX> "
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_CMD_IDE=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_SATA=y
|
|
CONFIG_CMD_SDRAM=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_DATE=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_SATA_SIL3114=y
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_SYS_FLASH_PROTECTION=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_MII=y
|
|
CONFIG_TSEC_ENET=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_OF_LIBFDT=y
|