u-boot/configs/s400_defconfig
Neil Armstrong bf1cbba6c8 ARM: meson: enable USB DFU + RAM on Amlogic boards with USB Gadget
Enable DFU as an alternate USB boot method when script wasn't
uploaded, this fixes USB full boot on G12/SM1 boards.

Link: https://lore.kernel.org/r/20231023-usb-dfu-boot-v1-4-df9d121c67c1@linaro.org
[narmstrong: remove dfu from ad401]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-26 17:56:58 +02:00

62 lines
1.5 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_TEXT_BASE=0x01000000
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
CONFIG_ENV_SIZE=0x2000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="meson-axg-s400"
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
CONFIG_MESON_AXG=y
CONFIG_DEBUG_UART_BASE=0xff803000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" s400"
CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_DEBUG_UART=y
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DFU_RAM=y
CONFIG_MMC_MESON_GX=y
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_MESON_GXL=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y