mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
093ff96e74
This patch adds a brief introduction to the RISC-V architecture and the typical boot process used on a variety of RISC-V platforms. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
81 lines
3.2 KiB
ReStructuredText
81 lines
3.2 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. Copyright (C) 2023, Yu Chien Peter Lin <peterlin@andestech.com>
|
|
|
|
RISC-V
|
|
======
|
|
|
|
Overview
|
|
--------
|
|
|
|
This document outlines the U-Boot boot process for the RISC-V architecture.
|
|
RISC-V is an open-source instruction set architecture (ISA) based on the
|
|
principles of reduced instruction set computing (RISC). It has been designed
|
|
to be flexible and customizable, allowing it to be adapted to different use
|
|
cases, from embedded systems to high performance servers.
|
|
|
|
Typical Boot Process
|
|
--------------------
|
|
|
|
U-Boot can run in either M-mode or S-mode, depending on whether it runs before
|
|
the initialization of the firmware providing SBI (Supervisor Binary Interface).
|
|
The firmware is necessary in the RISC-V boot process as it serves as a SEE
|
|
(Supervisor Execution Environment) to handle exceptions for the S-mode U-Boot
|
|
or Operating System.
|
|
|
|
In between the boot phases, the hartid is passed through the a0 register, and
|
|
the start address of the devicetree is passed through the a1 register.
|
|
|
|
As a reference, OpenSBI is an SBI implementation that can be used with U-Boot
|
|
in different modes, see the
|
|
`OpenSBI firmware document <https://github.com/riscv-software-src/opensbi/tree/master/docs/firmware>`_
|
|
for more details.
|
|
|
|
M-mode U-Boot
|
|
^^^^^^^^^^^^^
|
|
|
|
When running in M-mode U-Boot, it will load the payload image (e.g.
|
|
`fw_payload <https://github.com/riscv-software-src/opensbi/blob/master/docs/firmware/fw_payload.md>`_)
|
|
which contains the firmware and the S-mode Operating System; in this case, you
|
|
can use mkimage to package the payload image into an uImage format, and boot it
|
|
using the bootm command.
|
|
|
|
The following diagram illustrates the boot process::
|
|
|
|
<-----------( M-mode )----------><--( S-mode )-->
|
|
+----------+ +--------------+ +------------+
|
|
| U-Boot |-->| SBI firmware |--->| OS |
|
|
+----------+ +--------------+ +------------+
|
|
|
|
To examine the boot process with the QEMU virt machine, you can follow the
|
|
steps in the "Building U-Boot" section of the following document:
|
|
:doc:`../board/emulation/qemu-riscv`.
|
|
|
|
S-mode U-Boot
|
|
^^^^^^^^^^^^^
|
|
|
|
RISC-V production boot images may include a U-Boot SPL for platform-specific
|
|
initialization. The U-Boot SPL then loads a FIT image (u-boot.itb), which
|
|
contains a firmware (e.g.
|
|
`fw_dynamic <https://github.com/riscv-software-src/opensbi/blob/master/docs/firmware/fw_dynamic.md>`_)
|
|
providing the SBI, as well as a regular U-Boot (or U-Boot proper) running in
|
|
S-mode. Finally, the S-mode Operating
|
|
System is loaded.
|
|
|
|
The following diagram illustrates the boot process::
|
|
|
|
<-------------( M-mode )----------><----------( S-mode )------->
|
|
+------------+ +--------------+ +----------+ +----------+
|
|
| U-Boot SPL |-->| SBI firmware |--->| U-Boot |-->| OS |
|
|
+------------+ +--------------+ +----------+ +----------+
|
|
|
|
To examine the boot process with the QEMU virt machine, you can follow the
|
|
steps in the "Running U-Boot SPL" section of the following document:
|
|
:doc:`../board/emulation/qemu-riscv`.
|
|
|
|
Toolchain
|
|
---------
|
|
|
|
You can build the
|
|
`RISC-V GNU toolchain <https://github.com/riscv-collab/riscv-gnu-toolchain>`_
|
|
from scratch, or download a pre-built toolchain from the
|
|
`releases page <https://github.com/riscv-collab/riscv-gnu-toolchain/releases>`_.
|