u-boot/board/Marvell/db-88f6820-gp
Stefan Roese ce2cb1d3ed arm: mvebu: db-88f6820-gp: Enable PCI support
This patch enabled the MVEBU PCIe support on the db-88f6820-gp A38x
eval board. It also enabled the Intel E1000 driver support and
adds the initialization of PCIe network controllers to the
board code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Anton Schubert <anton.schubert@gmx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
2015-08-17 18:49:52 +02:00
..
binary.0 arm: mvebu: Add Armada A38x DB-88F6820-GP board support 2015-05-05 14:32:05 +02:00
db-88f6820-gp.c arm: mvebu: db-88f6820-gp: Enable PCI support 2015-08-17 18:49:52 +02:00
Kconfig arm: mvebu: Add Armada A38x DB-88F6820-GP board support 2015-05-05 14:32:05 +02:00
kwbimage.cfg arm: mvebu: db-88f6820: Add SPL support with DDR init code 2015-07-23 10:39:35 +02:00
MAINTAINERS arm: mvebu: db-88f6820-gp: Add MAINTAINERS file 2015-07-10 14:51:31 +02:00
Makefile arm: mvebu: Add Armada A38x DB-88F6820-GP board support 2015-05-05 14:32:05 +02:00
README arm: mvebu: db-88f6820: Add SPL support with DDR init code 2015-07-23 10:39:35 +02:00

Update from original Marvell U-Boot to mainline U-Boot:
-------------------------------------------------------

The resulting image including the SPL binary with the
full DDR setup is "u-boot-spl.kwb".

To update the SPI NOR flash, please use the following
command:

=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\
sf update 2000000 0 60000

Note that the original Marvell U-Boot seems to have
problems with the "sf update" command. This does not
work reliable. So here this command should be used:

=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\
sf erase 0 60000;sf write 2000000 0 60000