u-boot/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
Marek Vasut 4d573d5c98 ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board.
Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD,
SPI NOR and USB 3.0 host.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-05-23 11:37:58 +02:00

186 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2022 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <dm.h>
#include <env.h>
#include <env_internal.h>
#include <i2c_eeprom.h>
#include <malloc.h>
#include <net.h>
#include <miiphy.h>
#include "lpddr4_timing.h"
DECLARE_GLOBAL_DATA_PTR;
int mach_cpu_init(void)
{
icache_enable();
return 0;
}
int board_phys_sdram_size(phys_size_t *size)
{
const u16 memsz[] = { 512, 1024, 1536, 2048, 3072, 4096, 6144, 8192 };
u8 memcfg = dh_get_memcfg();
*size = (u64)memsz[memcfg] << 20ULL;
return 0;
}
/* IMX8M SNVS registers needed for the bootcount functionality */
#define SNVS_BASE_ADDR 0x30370000
#define SNVS_LPSR 0x4c
#define SNVS_LPLVDR 0x64
#define SNVS_LPPGDR_INIT 0x41736166
static void setup_snvs(void)
{
/* Enable SNVS clock */
clock_enable(CCGR_SNVS, 1);
/* Initialize glitch detect */
writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR);
/* Clear interrupt status */
writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR);
}
static void setup_eqos(void)
{
struct iomuxc_gpr_base_regs *gpr =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
/* Set INTF as RGMII, enable RGMII TXC clock. */
clrsetbits_le32(&gpr->gpr[1],
IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16));
setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21));
set_clk_eqos(ENET_125MHZ);
}
static void setup_fec(void)
{
struct iomuxc_gpr_base_regs *gpr =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
/* Enable RGMII TX clk output. */
setbits_le32(&gpr->gpr[1], BIT(22));
set_clk_enet(ENET_125MHZ);
}
static int setup_mac_address_from_eeprom(char *alias, char *env, bool odd)
{
unsigned char enetaddr[6];
struct udevice *dev;
int ret, offset;
offset = fdt_path_offset(gd->fdt_blob, alias);
if (offset < 0) {
printf("%s: No eeprom0 path offset\n", __func__);
return offset;
}
ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, offset, &dev);
if (ret) {
printf("Cannot find EEPROM!\n");
return ret;
}
ret = i2c_eeprom_read(dev, 0xfa, enetaddr, 0x6);
if (ret) {
printf("Error reading configuration EEPROM!\n");
return ret;
}
/*
* Populate second ethernet MAC from first ethernet EEPROM with MAC
* address LSByte incremented by 1. This is only used on SoMs without
* second ethernet EEPROM, i.e. early prototypes.
*/
if (odd)
enetaddr[5]++;
eth_env_set_enetaddr(env, enetaddr);
return 0;
}
static void setup_mac_address(void)
{
unsigned char enetaddr[6];
bool skip_eth0 = false;
bool skip_eth1 = false;
int ret;
ret = eth_env_get_enetaddr("ethaddr", enetaddr);
if (ret) /* ethaddr is already set */
skip_eth0 = true;
ret = eth_env_get_enetaddr("eth1addr", enetaddr);
if (ret) /* eth1addr is already set */
skip_eth1 = true;
/* Both MAC addresses are already set in U-Boot environment. */
if (skip_eth0 && skip_eth1)
return;
/*
* If IIM fuses contain valid MAC address, use it.
* The IIM MAC address fuses are NOT programmed by default.
*/
imx_get_mac_from_fuse(0, enetaddr);
if (is_valid_ethaddr(enetaddr)) {
if (!skip_eth0)
eth_env_set_enetaddr("ethaddr", enetaddr);
/*
* The LSbit of MAC address in fuses is always 0, use the
* next consecutive MAC address for the second ethernet.
*/
enetaddr[5]++;
if (!skip_eth1)
eth_env_set_enetaddr("eth1addr", enetaddr);
return;
}
/* Use on-SoM EEPROMs with pre-programmed MAC address. */
if (!skip_eth0) {
/* We cannot do much more if this returns -ve . */
setup_mac_address_from_eeprom("eeprom0", "ethaddr", false);
}
if (!skip_eth1) {
ret = setup_mac_address_from_eeprom("eeprom1", "eth1addr",
false);
if (ret) { /* Second EEPROM might not be populated. */
/* We cannot do much more if this returns -ve . */
setup_mac_address_from_eeprom("eeprom0", "eth1addr",
true);
}
}
}
int board_init(void)
{
setup_eqos();
setup_fec();
setup_snvs();
return 0;
}
int board_late_init(void)
{
setup_mac_address();
return 0;
}
enum env_location env_get_location(enum env_operation op, int prio)
{
return prio ? ENVL_UNKNOWN : ENVL_SPI_FLASH;
}