mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
25efd99dbb
Adapt the following patch from spl to nand_spl:
Author: Stefano Babic <sbabic@denx.de>
Date: Thu Dec 15 10:55:37 2011 +0100
nand_spl_simple: store ecc data on the stack
Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
which is likely to contain already loaded data.
The patch saves the oob data and the ecc on the stack replacing
the fixed address in RAM.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Simon Schwarz <simonschwarzcor@googlemail.com>
CC: Wolfgang Denk <wd@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
While nand_spl is on its way out, in favor of spl, there are still
many boards using it, and conversions are gradual. This allows us
to get rid of CONFIG_SYS_NAND_ECCSTEPS and CONFIG_SYS_NAND_ECCTOTAL now,
which would otherwise be likely to linger unreferenced after a conversion.
It also eliminates a temporary error in the hawkboard_nand build, since
the spl version of the patch removed ECCSTEPS/TOTAL from hawkboard.h, but
the spl conversion is pending (and may be merged via a different tree).
Signed-off-by: Scott Wood <scottwood@freescale.com>
206 lines
6.9 KiB
C
206 lines
6.9 KiB
C
/*
|
|
* Authors: Xiangfu Liu <xiangfu.z@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 3 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef __CONFIG_QI_LB60_H
|
|
#define __CONFIG_QI_LB60_H
|
|
|
|
#define CONFIG_MIPS32 /* MIPS32 CPU core */
|
|
#define CONFIG_JZSOC /* Jz SoC */
|
|
#define CONFIG_JZ4740 /* Jz4740 SoC */
|
|
#define CONFIG_NAND_JZ4740
|
|
|
|
#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
|
|
#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
|
|
#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
|
|
#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
|
|
|
|
#define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */
|
|
#define CONFIG_BAUDRATE 57600
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
|
|
#define CONFIG_BOOTDELAY 0
|
|
#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
|
|
#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMD_BOOTD /* bootd */
|
|
#define CONFIG_CMD_CONSOLE /* coninfo */
|
|
#define CONFIG_CMD_ECHO /* echo arguments */
|
|
|
|
#define CONFIG_CMD_LOADB /* loadb */
|
|
#define CONFIG_CMD_LOADS /* loads */
|
|
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
|
|
#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
|
|
#define CONFIG_CMD_RUN /* run command in env variable */
|
|
#define CONFIG_CMD_SAVEENV /* saveenv */
|
|
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
|
|
#define CONFIG_CMD_SOURCE /* "source" command support */
|
|
#define CONFIG_CMD_NAND
|
|
|
|
/*
|
|
* Serial download configuration
|
|
*/
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_SYS_PROMPT "NanoNote# "
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
|
|
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
|
|
#define CONFIG_SYS_LOAD_ADDR 0x80600000
|
|
#define CONFIG_SYS_MEMTEST_START 0x80100000
|
|
#define CONFIG_SYS_MEMTEST_END 0x80800000
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */
|
|
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
/*
|
|
* if board nand flash is 1GB, set to 1
|
|
* if board nand flash is 2GB, set to 2
|
|
* for change the PAGE_SIZE and BLOCK_SIZE
|
|
* will delete when there is no 1GB flash
|
|
*/
|
|
#define NANONOTE_NAND_SIZE 2
|
|
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE)
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10)
|
|
/* nand bad block was marked at this page in a block, start from 0 */
|
|
#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 128
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
/* ECC offset position in oob area, default value is 6 if it isn't defined */
|
|
#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE)
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 9
|
|
#define CONFIG_SYS_NAND_ECCPOS \
|
|
{12, 13, 14, 15, 16, 17, 18, 19,\
|
|
20, 21, 22, 23, 24, 25, 26, 27, \
|
|
28, 29, 30, 31, 32, 33, 34, 35, \
|
|
36, 37, 38, 39, 40, 41, 42, 43, \
|
|
44, 45, 46, 47, 48, 49, 50, 51, \
|
|
52, 53, 54, 55, 56, 57, 58, 59, \
|
|
60, 61, 62, 63, 64, 65, 66, 67, \
|
|
68, 69, 70, 71, 72, 73, 74, 75, \
|
|
76, 77, 78, 79, 80, 81, 82, 83}
|
|
|
|
#define CONFIG_SYS_NAND_OOBSIZE 128
|
|
#define CONFIG_SYS_NAND_BASE 0xB8000000
|
|
#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
|
|
#define CONFIG_NAND_SPL_TEXT_BASE 0x80000000
|
|
|
|
/*
|
|
* IPL (Initial Program Loader, integrated inside CPU)
|
|
* Will load first 8k from NAND (SPL) into cache and execute it from there.
|
|
*
|
|
* SPL (Secondary Program Loader)
|
|
* Will load special U-Boot version (NUB) from NAND and execute it. This SPL
|
|
* has to fit into 8kByte. It sets up the CPU and configures the SDRAM
|
|
* controller and the NAND controller so that the special U-Boot image can be
|
|
* loaded from NAND to SDRAM.
|
|
*
|
|
* NUB (NAND U-Boot)
|
|
* This NAND U-Boot (NUB) is a special U-Boot version which can be started
|
|
* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
|
/* Start NUB from this addr*/
|
|
|
|
/*
|
|
* Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
|
|
*/
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
|
|
|
|
#define CONFIG_ENV_SIZE (4 << 10)
|
|
#define CONFIG_ENV_OFFSET \
|
|
(CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE)
|
|
#define CONFIG_ENV_OFFSET_REDUND \
|
|
(CONFIG_ENV_OFFSET + CONFIG_SYS_NAND_BLOCK_SIZE)
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x80100000
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
|
|
/*
|
|
* SDRAM Info.
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
/*
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_DCACHE_SIZE 16384
|
|
#define CONFIG_SYS_ICACHE_SIZE 16384
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
/*
|
|
* GPIO definition
|
|
*/
|
|
#define GPIO_LCD_CS (2 * 32 + 21)
|
|
#define GPIO_AMP_EN (3 * 32 + 4)
|
|
|
|
#define GPIO_SDPW_EN (3 * 32 + 2)
|
|
#define GPIO_SD_DETECT (3 * 32 + 0)
|
|
|
|
#define GPIO_BUZZ_PWM (3 * 32 + 27)
|
|
#define GPIO_USB_DETECT (3 * 32 + 28)
|
|
|
|
#define GPIO_AUDIO_POP (1 * 32 + 29)
|
|
#define GPIO_COB_TEST (1 * 32 + 30)
|
|
|
|
#define GPIO_KEYOUT_BASE (2 * 32 + 10)
|
|
#define GPIO_KEYIN_BASE (3 * 32 + 18)
|
|
#define GPIO_KEYIN_8 (3 * 32 + 26)
|
|
|
|
#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
|
|
#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
|
|
|
|
#define SPEN GPIO_LCD_CS /* LCDCS :Serial command enable */
|
|
#define SPDA (2 * 32 + 22) /* LCDSCL:Serial command clock input */
|
|
#define SPCK (2 * 32 + 23) /* LCDSDA:Serial command data input */
|
|
|
|
/* SDRAM paramters */
|
|
#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
|
|
#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
|
|
#define SDRAM_ROW 13 /* Row address: 11 to 13 */
|
|
#define SDRAM_COL 9 /* Column address: 8 to 12 */
|
|
#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
|
|
|
|
/* SDRAM Timings, unit: ns */
|
|
#define SDRAM_TRAS 45 /* RAS# Active Time */
|
|
#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
|
|
#define SDRAM_TPC 20 /* RAS# Precharge Time */
|
|
#define SDRAM_TRWL 7 /* Write Latency Time */
|
|
#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
|
|
|
|
#endif
|