u-boot/arch/nios2/dts/10m50_devboard.dts
Gan, Yau Wai 9587dee937 nios2: 10m50: Add CPU pre-relocation in device tree
Tag CPU with dm-pre-reloc to enable driver before
relocation.

Signed-off-by: Gan, Yau Wai <yau.wai.gan@intel.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-11-17 10:51:24 -05:00

268 lines
5.9 KiB
Text

/*
* Copyright (C) 2015 Altera Corporation
*
* This file is generated by sopc2dts.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
/ {
model = "Altera NiosII Max10";
compatible = "altr,niosii-max10";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu: cpu@0 {
u-boot,dm-pre-reloc;
device_type = "cpu";
compatible = "altr,nios2-1.1";
reg = <0x00000000>;
interrupt-controller;
#interrupt-cells = <1>;
altr,exception-addr = <0xc8000120>;
altr,fast-tlb-miss-addr = <0xc0000100>;
altr,has-div = <1>;
altr,has-initda = <1>;
altr,has-mmu = <1>;
altr,has-mul = <1>;
altr,implementation = "fast";
altr,pid-num-bits = <8>;
altr,reset-addr = <0xd4000000>;
altr,tlb-num-entries = <256>;
altr,tlb-num-ways = <16>;
altr,tlb-ptr-sz = <8>;
clock-frequency = <75000000>;
dcache-line-size = <32>;
dcache-size = <32768>;
icache-line-size = <32>;
icache-size = <32768>;
};
};
memory {
device_type = "memory";
reg = <0x08000000 0x08000000>,
<0x00000000 0x00000400>;
};
sopc0: sopc@0 {
device_type = "soc";
ranges;
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,avalon", "simple-bus";
bus-frequency = <75000000>;
jtag_uart: serial@18001530 {
compatible = "altr,juart-1.0";
reg = <0x18001530 0x00000008>;
interrupt-parent = <&cpu>;
interrupts = <7>;
};
a_16550_uart_0: serial@18001600 {
compatible = "altr,16550-FIFO32", "ns16550a";
reg = <0x18001600 0x00000200>;
interrupt-parent = <&cpu>;
interrupts = <1>;
auto-flow-control = <1>;
clock-frequency = <50000000>;
fifo-size = <32>;
reg-io-width = <4>;
reg-shift = <2>;
};
ext_flash: quadspi@0x180014a0 {
compatible = "altr,quadspi-1.0";
reg = <0x180014a0 0x00000020>,
<0x14000000 0x04000000>;
reg-names = "avl_csr", "avl_mem";
interrupt-parent = <&cpu>;
interrupts = <4>;
#address-cells = <1>;
#size-cells = <0>;
flash0: nor0@0 {
compatible = "micron,n25q512a";
#address-cells = <1>;
#size-cells = <1>;
};
};
sysid: sysid@18001528 {
compatible = "altr,sysid-1.0";
reg = <0x18001528 0x00000008>;
};
rgmii_0_eth_tse_0: ethernet@400 {
compatible = "altr,tse-msgdma-1.0", "altr,tse-1.0";
reg = <0x00000400 0x00000400>,
<0x00000820 0x00000020>,
<0x00000800 0x00000020>,
<0x000008c0 0x00000008>,
<0x00000840 0x00000020>,
<0x00000860 0x00000020>;
reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp",
"tx_csr", "tx_desc";
interrupt-parent = <&cpu>;
interrupts = <2 3>;
interrupt-names = "rx_irq", "tx_irq";
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
address-bits = <48>;
max-frame-size = <1518>;
local-mac-address = [00 00 00 00 00 00];
altr,has-supplementary-unicast;
altr,enable-sup-addr = <1>;
altr,has-hash-multicast-filter;
altr,enable-hash = <1>;
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
rgmii_0_eth_tse_0_mdio: mdio {
compatible = "altr,tse-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
device_type = "ethernet-phy";
};
};
};
enet_pll: clock@0 {
compatible = "altr,pll-1.0";
#clock-cells = <1>;
enet_pll_c0: enet_pll_c0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
clock-output-names = "enet_pll-c0";
};
enet_pll_c1: enet_pll_c1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
clock-output-names = "enet_pll-c1";
};
enet_pll_c2: enet_pll_c2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <2500000>;
clock-output-names = "enet_pll-c2";
};
};
sys_pll: clock@1 {
compatible = "altr,pll-1.0";
#clock-cells = <1>;
sys_pll_c0: sys_pll_c0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "sys_pll-c0";
};
sys_pll_c1: sys_pll_c1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
clock-output-names = "sys_pll-c1";
};
sys_pll_c2: sys_pll_c2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <75000000>;
clock-output-names = "sys_pll-c2";
};
};
sys_clk_timer: timer@18001440 {
compatible = "altr,timer-1.0";
reg = <0x18001440 0x00000020>;
interrupt-parent = <&cpu>;
interrupts = <0>;
clock-frequency = <75000000>;
};
led_pio: gpio@180014d0 {
compatible = "altr,pio-1.0";
reg = <0x180014d0 0x00000010>;
altr,gpio-bank-width = <4>;
resetvalue = <15>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "led";
};
uart_0: serial@0x18001420 {
compatible = "altr,uart-1.0";
reg = <0x18001420 0x00000020>;
interrupt-parent = <&cpu>;
interrupts = <1>;
clock-frequency = <75000000>;
current-speed = <115200>;
};
button_pio: gpio@180014c0 {
compatible = "altr,pio-1.0";
reg = <0x180014c0 0x00000010>;
interrupt-parent = <&cpu>;
interrupts = <6>;
altr,gpio-bank-width = <3>;
altr,interrupt-type = <2>;
edge_type = <1>;
level_trigger = <0>;
resetvalue = <0>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "button";
};
sys_clk_timer_1: timer@880 {
compatible = "altr,timer-1.0";
reg = <0x00000880 0x00000020>;
interrupt-parent = <&cpu>;
interrupts = <5>;
clock-frequency = <75000000>;
};
fpga_leds: leds {
compatible = "gpio-leds";
led_fpga0: fpga0 {
label = "fpga_led0";
gpios = <&led_pio 0 1>;
};
led_fpga1: fpga1 {
label = "fpga_led1";
gpios = <&led_pio 1 1>;
};
led_fpga2: fpga2 {
label = "fpga_led2";
gpios = <&led_pio 2 1>;
};
led_fpga3: fpga3 {
label = "fpga_led3";
gpios = <&led_pio 3 1>;
};
};
};
chosen {
bootargs = "debug console=ttyS0,115200";
stdout-path = &a_16550_uart_0;
};
};