mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
181bd9dc61
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
239 lines
7.1 KiB
C
239 lines
7.1 KiB
C
/*
|
|
* Copyright (C) 2013 Samsung Electronics
|
|
* Sanghee Kim <sh0130.kim@samsung.com>
|
|
* Piotr Wilczek <p.wilczek@samsung.com>
|
|
*
|
|
* Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_TRATS2_H
|
|
#define __CONFIG_TRATS2_H
|
|
|
|
#include <configs/exynos4-common.h>
|
|
|
|
#define CONFIG_TIZEN /* TIZEN lib */
|
|
|
|
#define CONFIG_SYS_L2CACHE_OFF
|
|
#ifndef CONFIG_SYS_L2CACHE_OFF
|
|
#define CONFIG_SYS_L2_PL310
|
|
#define CONFIG_SYS_PL310_BASE 0x10502000
|
|
#endif
|
|
|
|
/* TRATS2 has 4 banks of DRAM */
|
|
#define CONFIG_NR_DRAM_BANKS 4
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
|
|
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
|
|
/* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x43e00000
|
|
|
|
/* select serial console configuration */
|
|
#define CONFIG_SERIAL2
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/* Console configuration */
|
|
#define CONFIG_SYS_CONSOLE_INFO_QUIET
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
|
|
#define CONFIG_FIT
|
|
#define CONFIG_FIT_VERBOSE
|
|
#define CONFIG_BOOTARGS "Please use defined boot"
|
|
#define CONFIG_BOOTCOMMAND "run autoboot"
|
|
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
|
|
- GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE 0x00000000
|
|
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
|
|
#define CONFIG_ENV_SIZE 4096
|
|
#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_ENV_VARS_UBOOT_CONFIG
|
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
|
|
/* Tizen - partitions definitions */
|
|
#define PARTS_CSA "csa-mmc"
|
|
#define PARTS_BOOT "boot"
|
|
#define PARTS_QBOOT "qboot"
|
|
#define PARTS_CSC "csc"
|
|
#define PARTS_ROOT "platform"
|
|
#define PARTS_DATA "data"
|
|
#define PARTS_UMS "ums"
|
|
|
|
#define PARTS_DEFAULT \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
|
|
"name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
|
|
"name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
|
|
"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
|
|
"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
|
|
"name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
|
|
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
|
|
|
|
#define CONFIG_DFU_ALT \
|
|
"u-boot raw 0x80 0x800;" \
|
|
"/uImage ext4 0 2;" \
|
|
"/modem.bin ext4 0 2;" \
|
|
"/exynos4412-trats2.dtb ext4 0 2;" \
|
|
""PARTS_CSA" part 0 1;" \
|
|
""PARTS_BOOT" part 0 2;" \
|
|
""PARTS_QBOOT" part 0 3;" \
|
|
""PARTS_CSC" part 0 4;" \
|
|
""PARTS_ROOT" part 0 5;" \
|
|
""PARTS_DATA" part 0 6;" \
|
|
""PARTS_UMS" part 0 7;" \
|
|
"params.bin raw 0x38 0x8;" \
|
|
"/Image.itb ext4 0 2\0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootk=" \
|
|
"run loaduimage;" \
|
|
"if run loaddtb; then " \
|
|
"bootm 0x40007FC0 - ${fdtaddr};" \
|
|
"fi;" \
|
|
"bootm 0x40007FC0;\0" \
|
|
"updatebackup=" \
|
|
"mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
|
|
" mmc dev 0 0\0" \
|
|
"updatebootb=" \
|
|
"mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
|
|
"mmcboot=" \
|
|
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
|
|
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
|
|
"run bootk\0" \
|
|
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
|
|
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
|
|
"verify=n\0" \
|
|
"rootfstype=ext4\0" \
|
|
"console=" CONFIG_DEFAULT_CONSOLE \
|
|
"kernelname=uImage\0" \
|
|
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
|
|
"${kernelname}\0" \
|
|
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
|
|
"${fdtfile}\0" \
|
|
"mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
|
|
"mmcbootpart=2\0" \
|
|
"mmcrootpart=5\0" \
|
|
"opts=always_resume=1\0" \
|
|
"partitions=" PARTS_DEFAULT \
|
|
"dfu_alt_info=" CONFIG_DFU_ALT \
|
|
"uartpath=ap\0" \
|
|
"usbpath=ap\0" \
|
|
"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
|
|
"consoleoff=set console console=ram; save; reset\0" \
|
|
"spladdr=0x40000100\0" \
|
|
"splsize=0x200\0" \
|
|
"splfile=falcon.bin\0" \
|
|
"spl_export=" \
|
|
"setexpr spl_imgsize ${splsize} + 8 ;" \
|
|
"setenv spl_imgsize 0x${spl_imgsize};" \
|
|
"setexpr spl_imgaddr ${spladdr} - 8 ;" \
|
|
"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
|
|
"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
|
|
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
|
|
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
|
|
"spl export atags 0x40007FC0;" \
|
|
"crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
|
|
"mw.l ${spl_addr_tmp} ${splsize};" \
|
|
"ext4write mmc ${mmcdev}:${mmcbootpart}" \
|
|
" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
|
|
"setenv spl_imgsize;" \
|
|
"setenv spl_imgaddr;" \
|
|
"setenv spl_addr_tmp;\0" \
|
|
CONFIG_EXTRA_ENV_ITB \
|
|
"fdtaddr=40800000\0" \
|
|
|
|
/* GPT */
|
|
#define CONFIG_RANDOM_UUID
|
|
|
|
/* I2C */
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#define CONFIG_CMD_I2C
|
|
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_S3C24X0
|
|
#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
|
|
#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
|
|
#define CONFIG_MAX_I2C_NUM 8
|
|
#define CONFIG_SYS_I2C_SOFT
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
|
|
#define I2C_SOFT_DECLARATIONS2
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00
|
|
#define CONFIG_SOFT_I2C_READ_REPEATED_START
|
|
#define CONFIG_SYS_I2C_INIT_BOARD
|
|
|
|
#ifndef __ASSEMBLY__
|
|
int get_soft_i2c_scl_pin(void);
|
|
int get_soft_i2c_sda_pin(void);
|
|
#endif
|
|
#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin()
|
|
#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin()
|
|
|
|
/* POWER */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_MAX77686
|
|
#define CONFIG_POWER_PMIC_MAX77693
|
|
#define CONFIG_POWER_MUIC_MAX77693
|
|
#define CONFIG_POWER_FG_MAX77693
|
|
#define CONFIG_POWER_BATTERY_TRATS2
|
|
|
|
/* Security subsystem - enable hw_rand() */
|
|
#define CONFIG_EXYNOS_ACE_SHA
|
|
#define CONFIG_LIB_HW_RAND
|
|
|
|
/* Common misc for Samsung */
|
|
#define CONFIG_MISC_COMMON
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
/* Download menu - Samsung common */
|
|
#define CONFIG_LCD_MENU
|
|
#define CONFIG_LCD_MENU_BOARD
|
|
|
|
/* Download menu - definitions for check keys */
|
|
#ifndef __ASSEMBLY__
|
|
#include <power/max77686_pmic.h>
|
|
|
|
#define KEY_PWR_PMIC_NAME "MAX77686_PMIC"
|
|
#define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1
|
|
#define KEY_PWR_STATUS_MASK (1 << 0)
|
|
#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1
|
|
#define KEY_PWR_INTERRUPT_MASK (1 << 1)
|
|
|
|
#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22
|
|
#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
/* LCD console */
|
|
#define LCD_BPP LCD_COLOR16
|
|
#define CONFIG_SYS_WHITE_ON_BLACK
|
|
|
|
/* LCD */
|
|
#define CONFIG_EXYNOS_FB
|
|
#define CONFIG_LCD
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_BMP_16BPP
|
|
#define CONFIG_FB_ADDR 0x52504000
|
|
#define CONFIG_S6E8AX0
|
|
#define CONFIG_EXYNOS_MIPI_DSIM
|
|
#define CONFIG_VIDEO_BMP_GZIP
|
|
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
|
|
|
|
#endif /* __CONFIG_H */
|