mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
f1683aa73c
This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com>
266 lines
7 KiB
C
266 lines
7 KiB
C
/*
|
|
* Copyright 2011-2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <hwconfig.h>
|
|
#include <fsl_ddr.h>
|
|
#include <asm/mmu.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <fsl_ddr_dimm_params.h>
|
|
#include <asm/fsl_law.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 2,
|
|
.rank_density = 2147483648u,
|
|
.capacity = 4294967296u,
|
|
.primary_sdram_width = 64,
|
|
.ec_sdram_width = 8,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 1,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 2, /* ECC */
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tckmin_x_ps = 1071,
|
|
.caslat_x = 0x2fe << 4, /* 5,6,7,8,9,10,11,13 */
|
|
.taa_ps = 13910,
|
|
.twr_ps = 15000,
|
|
.trcd_ps = 13910,
|
|
.trrd_ps = 6000,
|
|
.trp_ps = 13910,
|
|
.tras_ps = 34000,
|
|
.trc_ps = 48910,
|
|
.trfc_ps = 260000,
|
|
.twtr_ps = 7500,
|
|
.trtp_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tfaw_ps = 35000,
|
|
};
|
|
|
|
int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
|
|
unsigned int controller_number,
|
|
unsigned int dimm_number)
|
|
{
|
|
const char dimm_model[] = "RAW timing DDR";
|
|
|
|
if ((controller_number == 0) && (dimm_number == 0)) {
|
|
memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
|
|
memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
|
|
memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct board_specific_parameters {
|
|
u32 n_ranks;
|
|
u32 datarate_mhz_high;
|
|
u32 clk_adjust;
|
|
u32 wrlvl_start;
|
|
u32 wrlvl_ctl_2;
|
|
u32 wrlvl_ctl_3;
|
|
u32 cpo;
|
|
u32 write_data_delay;
|
|
u32 force_2t;
|
|
};
|
|
|
|
/*
|
|
* This table contains all valid speeds we want to override with board
|
|
* specific parameters. datarate_mhz_high values need to be in ascending order
|
|
* for each n_ranks group.
|
|
*/
|
|
static const struct board_specific_parameters udimm0[] = {
|
|
/*
|
|
* memory controller 0
|
|
* num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
|
|
* ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
|
|
*/
|
|
{2, 1350, 4, 7, 0x09080807, 0x07060607, 0xff, 2, 0},
|
|
{2, 1666, 4, 7, 0x09080806, 0x06050607, 0xff, 2, 0},
|
|
{2, 1900, 3, 7, 0x08070706, 0x06040507, 0xff, 2, 0},
|
|
{1, 1350, 4, 7, 0x09080807, 0x07060607, 0xff, 2, 0},
|
|
{1, 1700, 4, 7, 0x09080806, 0x06050607, 0xff, 2, 0},
|
|
{1, 1900, 3, 7, 0x08070706, 0x06040507, 0xff, 2, 0},
|
|
{}
|
|
};
|
|
|
|
static const struct board_specific_parameters *udimms[] = {
|
|
udimm0,
|
|
};
|
|
|
|
void fsl_ddr_board_options(memctl_options_t *popts,
|
|
dimm_params_t *pdimm,
|
|
unsigned int ctrl_num)
|
|
{
|
|
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
|
|
ulong ddr_freq;
|
|
|
|
if (ctrl_num > 2) {
|
|
printf("Not supported controller number %d\n", ctrl_num);
|
|
return;
|
|
}
|
|
if (!pdimm->n_ranks)
|
|
return;
|
|
|
|
pbsp = udimms[0];
|
|
|
|
|
|
/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
|
|
* freqency and n_banks specified in board_specific_parameters table.
|
|
*/
|
|
ddr_freq = get_ddr_freq(0) / 1000000;
|
|
while (pbsp->datarate_mhz_high) {
|
|
if (pbsp->n_ranks == pdimm->n_ranks) {
|
|
if (ddr_freq <= pbsp->datarate_mhz_high) {
|
|
popts->cpo_override = pbsp->cpo;
|
|
popts->write_data_delay =
|
|
pbsp->write_data_delay;
|
|
popts->clk_adjust = pbsp->clk_adjust;
|
|
popts->wrlvl_start = pbsp->wrlvl_start;
|
|
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
|
|
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
|
|
popts->twot_en = pbsp->force_2t;
|
|
goto found;
|
|
}
|
|
pbsp_highest = pbsp;
|
|
}
|
|
pbsp++;
|
|
}
|
|
|
|
if (pbsp_highest) {
|
|
printf("Error: board specific timing not found "
|
|
"for data rate %lu MT/s\n"
|
|
"Trying to use the highest speed (%u) parameters\n",
|
|
ddr_freq, pbsp_highest->datarate_mhz_high);
|
|
popts->cpo_override = pbsp_highest->cpo;
|
|
popts->write_data_delay = pbsp_highest->write_data_delay;
|
|
popts->clk_adjust = pbsp_highest->clk_adjust;
|
|
popts->wrlvl_start = pbsp_highest->wrlvl_start;
|
|
popts->twot_en = pbsp_highest->force_2t;
|
|
} else {
|
|
panic("DIMM is not supported by this board");
|
|
}
|
|
found:
|
|
/*
|
|
* Factors to consider for half-strength driver enable:
|
|
* - number of DIMMs installed
|
|
*/
|
|
popts->half_strength_driver_enable = 0;
|
|
/*
|
|
* Write leveling override
|
|
*/
|
|
popts->wrlvl_override = 1;
|
|
popts->wrlvl_sample = 0xf;
|
|
|
|
/*
|
|
* Rtt and Rtt_WR override
|
|
*/
|
|
popts->rtt_override = 0;
|
|
|
|
/* Enable ZQ calibration */
|
|
popts->zq_en = 1;
|
|
|
|
/* DHC_EN =1, ODT = 75 Ohm */
|
|
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
|
|
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
|
|
|
|
/* optimize cpo for erratum A-009942 */
|
|
popts->cpo_sample = 0x3e;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
phys_size_t dram_size;
|
|
|
|
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
|
|
puts("Initializing....using SPD\n");
|
|
dram_size = fsl_ddr_sdram();
|
|
#else
|
|
dram_size = fsl_ddr_sdram_size();
|
|
#endif
|
|
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
|
dram_size *= 0x100000;
|
|
|
|
gd->ram_size = dram_size;
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
|
|
unsigned int dbw_cap_adj[])
|
|
{
|
|
int i, j;
|
|
unsigned long long total_mem, current_mem_base, total_ctlr_mem;
|
|
unsigned long long rank_density, ctlr_density = 0;
|
|
|
|
current_mem_base = 0ull;
|
|
total_mem = 0;
|
|
/*
|
|
* This board has soldered DDR chips. DDRC1 has two rank.
|
|
* DDRC2 has only one rank.
|
|
* Assigning DDRC2 to lower address and DDRC1 to higher address.
|
|
*/
|
|
if (pinfo->memctl_opts[0].memctl_interleaving) {
|
|
rank_density = pinfo->dimm_params[0][0].rank_density >>
|
|
dbw_cap_adj[0];
|
|
ctlr_density = rank_density;
|
|
|
|
debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
|
|
rank_density, ctlr_density);
|
|
for (i = CONFIG_SYS_NUM_DDR_CTLRS - 1; i >= 0; i--) {
|
|
switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
|
|
case FSL_DDR_CACHE_LINE_INTERLEAVING:
|
|
case FSL_DDR_PAGE_INTERLEAVING:
|
|
case FSL_DDR_BANK_INTERLEAVING:
|
|
case FSL_DDR_SUPERBANK_INTERLEAVING:
|
|
total_ctlr_mem = 2 * ctlr_density;
|
|
break;
|
|
default:
|
|
panic("Unknown interleaving mode");
|
|
}
|
|
pinfo->common_timing_params[i].base_address =
|
|
current_mem_base;
|
|
pinfo->common_timing_params[i].total_mem =
|
|
total_ctlr_mem;
|
|
total_mem = current_mem_base + total_ctlr_mem;
|
|
debug("ctrl %d base 0x%llx\n", i, current_mem_base);
|
|
debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
|
|
}
|
|
} else {
|
|
/*
|
|
* Simple linear assignment if memory
|
|
* controllers are not interleaved.
|
|
*/
|
|
for (i = CONFIG_SYS_NUM_DDR_CTLRS - 1; i >= 0; i--) {
|
|
total_ctlr_mem = 0;
|
|
pinfo->common_timing_params[i].base_address =
|
|
current_mem_base;
|
|
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
|
|
/* Compute DIMM base addresses. */
|
|
unsigned long long cap =
|
|
pinfo->dimm_params[i][j].capacity;
|
|
pinfo->dimm_params[i][j].base_address =
|
|
current_mem_base;
|
|
debug("ctrl %d dimm %d base 0x%llx\n",
|
|
i, j, current_mem_base);
|
|
current_mem_base += cap;
|
|
total_ctlr_mem += cap;
|
|
}
|
|
debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
|
|
pinfo->common_timing_params[i].total_mem =
|
|
total_ctlr_mem;
|
|
total_mem += total_ctlr_mem;
|
|
}
|
|
}
|
|
debug("Total mem by %s is 0x%llx\n", __func__, total_mem);
|
|
|
|
return total_mem;
|
|
}
|