mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
fcd7ba655e
This converts the following to Kconfig: CONFIG_TPS6586X_POWER CONFIG_TWL6030_POWER Signed-off-by: Tom Rini <trini@konsulko.com>
482 lines
16 KiB
Text
482 lines
16 KiB
Text
menuconfig POWER
|
|
bool "Power"
|
|
default y
|
|
help
|
|
Enable support for power control in U-Boot. This includes support
|
|
for PMICs (Power-management Integrated Circuits) and some of the
|
|
features provided by PMICs. In particular, voltage regulators can
|
|
be used to enable/disable power and vary its voltage. That can be
|
|
useful in U-Boot to turn on boot peripherals and adjust CPU voltage
|
|
so that the clock speed can be increased. This enables the drivers
|
|
in drivers/power, drivers/power/pmic and drivers/power/regulator
|
|
as part of a build.
|
|
|
|
if POWER
|
|
|
|
config POWER_LEGACY
|
|
bool "Legacy power support"
|
|
help
|
|
Note: This is a legacy option. Use DM_PMIC instead.
|
|
|
|
Enable support for power control in U-Boot. This includes support
|
|
for PMICs (Power-management Integrated Circuits) and some of the
|
|
features provided by PMICs. In particular, voltage regulators can
|
|
be used to enable/disable power and vary its voltage. That can be
|
|
useful in U-Boot to turn on boot peripherals and adjust CPU voltage
|
|
so that the clock speed can be increased. This enables the drivers
|
|
in drivers/power, drivers/power/pmic and drivers/power/regulator
|
|
as part of a build.
|
|
|
|
config SPL_POWER_LEGACY
|
|
bool "Legacy power support in SPL"
|
|
depends on SPL && !SPL_DM_PMIC
|
|
default y if POWER_LEGACY
|
|
help
|
|
Note: This is a legacy option. Use SPL_DM_PMIC instead.
|
|
|
|
Enable support for power control in SPL. This includes support
|
|
for PMICs (Power-management Integrated Circuits) and some of the
|
|
features provided by PMICs. In particular, voltage regulators can
|
|
be used to enable/disable power and vary its voltage. That can be
|
|
useful in SPL to turn on boot peripherals and adjust CPU voltage
|
|
so that the clock speed can be increased. This enables the drivers
|
|
in drivers/power, drivers/power/pmic and drivers/power/regulator
|
|
as part of a build.
|
|
|
|
source "drivers/power/acpi_pmc/Kconfig"
|
|
|
|
source "drivers/power/domain/Kconfig"
|
|
|
|
source "drivers/power/pmic/Kconfig"
|
|
|
|
source "drivers/power/regulator/Kconfig"
|
|
|
|
choice
|
|
prompt "Select Sunxi PMIC Variant"
|
|
depends on ARCH_SUNXI
|
|
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
|
|
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
|
|
default AXP305_POWER if MACH_SUN50I_H616
|
|
default AXP818_POWER if MACH_SUN8I_A83T
|
|
default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
|
|
|
|
config SUNXI_NO_PMIC
|
|
bool "board without a pmic"
|
|
---help---
|
|
Select this for boards which do not use a PMIC.
|
|
|
|
config AXP152_POWER
|
|
bool "axp152 pmic support"
|
|
depends on MACH_SUN5I
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp152 pmic found on most
|
|
A10s boards.
|
|
|
|
config AXP209_POWER
|
|
bool "axp209 pmic support"
|
|
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp209 pmic found on most
|
|
A10, A13 and A20 boards.
|
|
|
|
config AXP221_POWER
|
|
bool "axp221 / axp223 pmic support"
|
|
depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp221/axp223 pmic found on most
|
|
A23 and A31 boards.
|
|
|
|
config AXP305_POWER
|
|
bool "axp305 pmic support"
|
|
depends on MACH_SUN50I_H616
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Select this to enable support for the axp305 pmic found on most
|
|
H616 boards.
|
|
|
|
config AXP809_POWER
|
|
bool "axp809 pmic support"
|
|
depends on MACH_SUN9I
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Say y here to enable support for the axp809 pmic found on A80 boards.
|
|
|
|
config AXP818_POWER
|
|
bool "axp818 pmic support"
|
|
depends on MACH_SUN8I_A83T
|
|
select AXP_PMIC_BUS
|
|
select CMD_POWEROFF
|
|
---help---
|
|
Say y here to enable support for the axp818 pmic found on
|
|
A83T dev board.
|
|
|
|
config SY8106A_POWER
|
|
bool "SY8106A pmic support"
|
|
depends on MACH_SUNXI_H3_H5
|
|
---help---
|
|
Select this to enable support for the SY8106A pmic found on some
|
|
H3 boards.
|
|
|
|
endchoice
|
|
|
|
config AXP_DCDC1_VOLT
|
|
int "axp pmic dcdc1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3300 if AXP818_POWER || MACH_SUN8I_R40
|
|
default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
|
|
disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
|
|
generic 3.3V IO voltage for external devices like the lcd-panal and
|
|
sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
|
|
save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
|
|
dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
|
|
powers some of the pingroups, NAND/eMMC, SD/MMC, and USB OTG.
|
|
|
|
config AXP_DCDC2_VOLT
|
|
int "axp pmic dcdc2 voltage"
|
|
depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 900 if AXP818_POWER
|
|
default 1400 if AXP152_POWER || AXP209_POWER
|
|
default 1200 if MACH_SUN6I
|
|
default 1100 if MACH_SUN8I
|
|
default 0 if MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
|
|
disable dcdc2.
|
|
On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
|
|
On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
|
|
On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
|
|
On A80 boards dcdc2 powers the GPU and can be left off.
|
|
On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
|
|
On R40 boards dcdc2 is VDD-CPU and should be 1.1V
|
|
|
|
config AXP_DCDC3_VOLT
|
|
int "axp pmic dcdc3 voltage"
|
|
depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 900 if AXP809_POWER || AXP818_POWER
|
|
default 1500 if AXP152_POWER
|
|
default 1250 if AXP209_POWER
|
|
default 1100 if MACH_SUN8I_R40
|
|
default 1200 if MACH_SUN6I || MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
|
|
disable dcdc3.
|
|
On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
|
|
should be 1.25V.
|
|
On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
|
|
On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
|
|
On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
|
|
On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
|
|
On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
|
|
|
|
config AXP_DCDC4_VOLT
|
|
int "axp pmic dcdc4 voltage"
|
|
depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER
|
|
default 1250 if AXP152_POWER
|
|
default 1200 if MACH_SUN6I
|
|
default 0 if MACH_SUN8I
|
|
default 900 if MACH_SUN9I
|
|
default 1500 if AXP305_POWER
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
|
|
disable dcdc4.
|
|
On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
|
|
On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
|
|
On A23 / A33 boards dcdc4 is unused and should be disabled.
|
|
On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
|
|
On A83T boards dcdc4 is used for VDD-GPU.
|
|
On H616 boards dcdcd is used for VCC-DRAM.
|
|
|
|
config AXP_DCDC5_VOLT
|
|
int "axp pmic dcdc5 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
|
|
disable dcdc5.
|
|
On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
|
|
should be 1.5V, 1.35V if DDR3L is used.
|
|
|
|
config AXP_ALDO1_VOLT
|
|
int "axp pmic (a)ldo1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0 if MACH_SUN6I || MACH_SUN8I_R40
|
|
default 1800 if MACH_SUN8I_A83T
|
|
default 3000 if MACH_SUN8I || MACH_SUN9I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
|
|
disable aldo1.
|
|
On A31 boards aldo1 is often used to power the wifi module.
|
|
On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
|
|
On A80 boards aldo1 powers the USB hosts and should be 3.0V.
|
|
On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and
|
|
should be 1.8V.
|
|
|
|
config AXP_ALDO2_VOLT
|
|
int "axp pmic (a)ldo2 voltage"
|
|
depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3000 if AXP152_POWER || AXP209_POWER
|
|
default 0 if MACH_SUN6I || MACH_SUN9I
|
|
default 1800 if MACH_SUN8I_A83T
|
|
default 2500 if MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
|
|
disable aldo2.
|
|
On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V.
|
|
On A31 boards aldo2 is typically unused and should be disabled.
|
|
On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
|
|
On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
|
|
On A80 boards aldo2 powers PB pingroup and camera IO and can be left off.
|
|
On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC,
|
|
LPDDR2, and the codec. It should be 1.8V.
|
|
|
|
config AXP_ALDO3_VOLT
|
|
int "axp pmic (a)ldo3 voltage"
|
|
depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0 if AXP209_POWER || MACH_SUN9I
|
|
default 3000 if MACH_SUN6I || MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
|
|
disable aldo3.
|
|
On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
|
|
On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
|
|
be 3.0V.
|
|
On A80 boards aldo3 is normally not used.
|
|
On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
|
|
3.0V.
|
|
|
|
choice
|
|
prompt "axp pmic (a)ldo3 voltage rate control"
|
|
depends on AXP209_POWER
|
|
default AXP_ALDO3_VOLT_SLOPE_NONE
|
|
---help---
|
|
The AXP can slowly ramp up voltage to reduce the inrush current when
|
|
changing voltages.
|
|
Note, this does not apply when enabling/disabling LDO3. See
|
|
"axp pmic (a)ldo3 inrush quirk" below to enable a slew rate to limit
|
|
inrush current on broken board designs.
|
|
|
|
config AXP_ALDO3_VOLT_SLOPE_NONE
|
|
bool "No voltage slope"
|
|
---help---
|
|
Tries to reach the next voltage setting near instantaneously. Measurements
|
|
indicate that this is about 0.0167 V/uS.
|
|
|
|
config AXP_ALDO3_VOLT_SLOPE_16
|
|
bool "1.6 mV per uS"
|
|
---help---
|
|
Increases the voltage by 1.6 mV per uS until the final voltage has
|
|
been reached. Note that the scaling is in 25 mV steps and thus
|
|
the slew rate in reality is about 25 mV/31.250 uS.
|
|
|
|
config AXP_ALDO3_VOLT_SLOPE_08
|
|
bool "0.8 mV per uS"
|
|
---help---
|
|
Increases the voltage by 0.8 mV per uS until the final voltage has
|
|
been reached. Note that the scaling is in 25 mV steps however and thus
|
|
the slew rate in reality is about 25 mV/15.625 uS.
|
|
This is the slowest supported rate.
|
|
|
|
endchoice
|
|
|
|
config AXP_ALDO3_INRUSH_QUIRK
|
|
bool "axp pmic (a)ldo3 inrush quirk"
|
|
depends on AXP209_POWER
|
|
---help---
|
|
The reference design denotes a value of 4.7 uF for the output capacitor
|
|
of LDO3. Some boards have too high capacitance causing an inrush current
|
|
and resulting an AXP209 shutdown.
|
|
|
|
config AXP_ALDO4_VOLT
|
|
int "axp pmic (a)ldo4 voltage"
|
|
depends on AXP209_POWER
|
|
default 0 if AXP209_POWER
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
|
|
disable aldo4.
|
|
On A10(s) / A13 / A20 boards aldo4 should be 2.8V.
|
|
|
|
config AXP_DLDO1_VOLT
|
|
int "axp pmic dldo1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
|
|
disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used
|
|
to power the ethernet phy. On A23, A33 and A80 boards this is often
|
|
used to power the wifi.
|
|
|
|
config AXP_DLDO2_VOLT
|
|
int "axp pmic dldo2 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3000 if MACH_SUN9I
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
|
|
disable dldo2.
|
|
On A80 boards dldo2 normally powers the PL pins and should be 3.0V.
|
|
|
|
config AXP_DLDO3_VOLT
|
|
int "axp pmic dldo3 voltage"
|
|
depends on AXP221_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
|
|
disable dldo3.
|
|
|
|
config AXP_DLDO4_VOLT
|
|
int "axp pmic dldo4 voltage"
|
|
depends on AXP221_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
|
|
disable dldo4.
|
|
|
|
config AXP_ELDO1_VOLT
|
|
int "axp pmic eldo1 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
|
|
disable eldo1.
|
|
|
|
config AXP_ELDO2_VOLT
|
|
int "axp pmic eldo2 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
|
|
disable eldo2.
|
|
|
|
config AXP_ELDO3_VOLT
|
|
int "axp pmic eldo3 voltage"
|
|
depends on AXP221_POWER || AXP809_POWER || AXP818_POWER
|
|
default 3000 if MACH_SUN9I
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
|
|
disable eldo3. On some A31(s) tablets it might be used to supply
|
|
1.2V for the SSD2828 chip (converter of parallel LCD interface
|
|
into MIPI DSI).
|
|
On A80 boards it powers the PM pingroup and should be 3.0V.
|
|
|
|
config AXP_FLDO1_VOLT
|
|
int "axp pmic fldo1 voltage"
|
|
depends on AXP818_POWER
|
|
default 0 if MACH_SUN8I_A83T
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
|
|
disable fldo1.
|
|
On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
|
|
used.
|
|
|
|
config AXP_FLDO2_VOLT
|
|
int "axp pmic fldo2 voltage"
|
|
depends on AXP818_POWER
|
|
default 900 if MACH_SUN8I_A83T
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
|
|
disable fldo2.
|
|
On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
|
|
|
|
config AXP_FLDO3_VOLT
|
|
int "axp pmic fldo3 voltage"
|
|
depends on AXP818_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
|
|
disable fldo3.
|
|
|
|
config AXP_SW_ON
|
|
bool "axp pmic sw on"
|
|
depends on AXP809_POWER || AXP818_POWER
|
|
---help---
|
|
Enable to turn on axp pmic sw.
|
|
|
|
config SY8106A_VOUT1_VOLT
|
|
int "SY8106A pmic VOUT1 voltage"
|
|
depends on SY8106A_POWER
|
|
default 1200
|
|
---help---
|
|
Set the voltage (mV) to program the SY8106A pmic VOUT1. This
|
|
is typically used to power the VDD-CPU and should be 1200mV.
|
|
Values can range from 680mV till 1950mV.
|
|
|
|
config TPS6586X_POWER
|
|
bool "Enable legacy driver for TI TPS6586x power management chip"
|
|
|
|
config TWL4030_POWER
|
|
depends on OMAP34XX
|
|
bool "Enable driver for TI TWL4030 power management chip"
|
|
imply CMD_POWEROFF
|
|
---help---
|
|
The TWL4030 in a combination audio CODEC/power management with
|
|
GPIO and it is commonly used with the OMAP3 family of processors
|
|
|
|
config TWL6030_POWER
|
|
depends on OMAP44XX
|
|
bool "Enable driver for TI TWL6030 power management chip"
|
|
|
|
config POWER_MT6323
|
|
bool "Poweroff driver for mediatek mt6323"
|
|
select CMD_POWEROFF
|
|
help
|
|
This adds poweroff driver for mt6323
|
|
this pmic is used on mt7623 / Bananapi R2
|
|
|
|
config PALMAS_POWER
|
|
bool "Palmas power support"
|
|
depends on OMAP54XX
|
|
|
|
config POWER_FSL
|
|
bool "Power control (legacy) for Freescale / NXP platforms"
|
|
depends on POWER_LEGACY
|
|
|
|
config POWER_I2C
|
|
bool "I2C-based power control for legacy power"
|
|
depends on POWER_LEGACY
|
|
help
|
|
Enable this to use the I2C driver designed for the legacy PMIC
|
|
interface.
|
|
|
|
Not to be used for new designs and existing ones should be moved to
|
|
the new PMIC interface based on driver model.
|
|
|
|
config POWER_SPI
|
|
bool "SPI-based power control for legacy power_fsl driver"
|
|
depends on POWER_FSL && !POWER_I2C
|
|
|
|
config SPL_POWER_I2C
|
|
bool "I2C-based power control for legacy power"
|
|
depends on SPL_POWER_LEGACY
|
|
default y if POWER_I2C
|
|
help
|
|
Enable this to use the I2C driver designed for the legacy PMIC
|
|
interface.
|
|
|
|
Not to be used for new designs and existing ones should be moved to
|
|
the new PMIC interface based on driver model.
|
|
|
|
choice
|
|
prompt "PMIC chip"
|
|
default POWER_FSL_MC13892
|
|
depends on POWER_FSL && POWER_I2C
|
|
|
|
config POWER_FSL_MC13892
|
|
bool "MC13892"
|
|
|
|
config POWER_FSL_MC34704
|
|
bool "MC34704"
|
|
|
|
endchoice
|
|
|
|
endif
|