u-boot/arch/arm/mach-sunxi/Makefile
Andre Przywara 20b78c55e7 pinctrl: sunxi: move pinctrl code
Move the existing sunxi-specific low level pinctrl routines from
arch/arm/mach-sunxi into the existing GPIO code under drivers/gpio, so
that the common code can be shared outside of arch/arm.

This also takes the opportunity to move some definitions from our
header file into the driver C file, as they are private to the driver
and are not needed elsewhere.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-10-22 23:40:56 +01:00

47 lines
1.5 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
#
# Based on some other Makefile
# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y += board.o
obj-y += clock.o
obj-y += cpu_info.o
obj-y += dram_helpers.o
obj-$(CONFIG_SUN6I_PRCM) += prcm.o
obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o
obj-$(CONFIG_MACH_SUNIV) += clock_sun6i.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN50I) += clock_sun6i.o
ifdef CONFIG_MACH_SUN8I_A83T
obj-y += clock_sun8i_a83t.o
else
obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
obj-$(CONFIG_SUN50I_GEN_H6) += clock_sun50i_h6.o
ifndef CONFIG_ARM64
obj-y += timer.o
endif
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_MACH_SUNIV) += dram_suniv.o
obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o
obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o
obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_DRAM_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_DRAM_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o
obj-$(CONFIG_SPL_SPI_SUNXI) += spl_spi_sunxi.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/
obj-$(CONFIG_DRAM_SUN50I_H6) += dram_sun50i_h6.o
obj-$(CONFIG_DRAM_SUN50I_H6) += dram_timings/
obj-$(CONFIG_DRAM_SUN50I_H616) += dram_sun50i_h616.o
obj-$(CONFIG_DRAM_SUN50I_H616) += dram_timings/
endif