mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
df48265036
Xilinx LocalLink Tri-Mode Ether MAC driver can be used by Xilinx Microblaze or Xilinx ppc405/440 in SDMA and FIFO mode. DCR or XPS bus can be used. The driver uses and requires MII and PHYLIB. CP: 4 warnings: 'Use of volatile is usually wrong' I won't fix this, because it depends on the network driver subsystem. Reported-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Stephan Linz <linz@li-pro.net>
281 lines
10 KiB
C
281 lines
10 KiB
C
/*
|
|
* Xilinx xps_ll_temac ethernet driver for u-boot
|
|
*
|
|
* SDMA sub-controller interface
|
|
*
|
|
* Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
|
|
* Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
|
|
* Copyright (C) 2008 - 2011 PetaLogix
|
|
*
|
|
* Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
|
|
* Copyright (C) 2008 Nissin Systems Co.,Ltd.
|
|
* March 2008 created
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* [0]: http://www.xilinx.com/support/documentation
|
|
*
|
|
* [S]: [0]/ip_documentation/xps_ll_temac.pdf
|
|
* [A]: [0]/application_notes/xapp1041.pdf
|
|
*/
|
|
#ifndef _XILINX_LL_TEMAC_SDMA_
|
|
#define _XILINX_LL_TEMAC_SDMA_
|
|
|
|
#include <net.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <linux/compiler.h>
|
|
|
|
#if !defined(__BIG_ENDIAN)
|
|
# error LL_TEMAC requires big endianess
|
|
#endif
|
|
|
|
/*
|
|
* DMA Buffer Descriptor for CDMAC
|
|
*
|
|
* Used for data connection from and to (Rx/Tx) the LocalLink (LL) TEMAC via
|
|
* the Communications Direct Memory Access Controller (CDMAC) -- one for each.
|
|
*
|
|
* overview:
|
|
* ftp://ftp.xilinx.com/pub/documentation/misc/mpmc_getting_started.pdf
|
|
*
|
|
* [1]: [0]/ip_documentation/mpmc.pdf
|
|
* page 140, DMA Operation Descriptors
|
|
*
|
|
* [2]: [0]/user_guides/ug200.pdf
|
|
* page 229, DMA Controller -- Descriptor Format
|
|
*
|
|
* [3]: [0]/ip_documentation/xps_ll_temac.pdf
|
|
* page 72, Transmit LocalLink Frame Format
|
|
* page 73, Receive LocalLink Frame Format
|
|
*/
|
|
struct cdmac_bd {
|
|
struct cdmac_bd *next_p; /* Next Descriptor Pointer */
|
|
u8 *phys_buf_p; /* Buffer Address */
|
|
u32 buf_len; /* Buffer Length */
|
|
union {
|
|
u8 stctrl; /* Status/Control the DMA transfer */
|
|
u32 app[5]; /* application specific data */
|
|
} __packed __aligned(1) sca;
|
|
};
|
|
|
|
/* CDMAC Descriptor Status and Control (stctrl), [1] p140, [2] p230 */
|
|
#define CDMAC_BD_STCTRL_ERROR (1 << 7)
|
|
#define CDMAC_BD_STCTRL_IRQ_ON_END (1 << 6)
|
|
#define CDMAC_BD_STCTRL_STOP_ON_END (1 << 5)
|
|
#define CDMAC_BD_STCTRL_COMPLETED (1 << 4)
|
|
#define CDMAC_BD_STCTRL_SOP (1 << 3)
|
|
#define CDMAC_BD_STCTRL_EOP (1 << 2)
|
|
#define CDMAC_BD_STCTRL_DMACHBUSY (1 << 1)
|
|
|
|
/* CDMAC Descriptor APP0: Transmit LocalLink Footer Word 3, [3] p72 */
|
|
#define CDMAC_BD_APP0_TXCSCNTRL (1 << 0)
|
|
|
|
/* CDMAC Descriptor APP1: Transmit LocalLink Footer Word 4, [3] p73 */
|
|
#define CDMAC_BD_APP1_TXCSBEGIN_POS 16
|
|
#define CDMAC_BD_APP1_TXCSBEGIN_MASK (0xFFFF << CDMAC_BD_APP1_TXCSBEGIN_POS)
|
|
#define CDMAC_BD_APP1_TXCSINSERT_POS 0
|
|
#define CDMAC_BD_APP1_TXCSINSERT_MASK (0xFFFF << CDMAC_BD_APP1_TXCSINSERT_POS)
|
|
|
|
/* CDMAC Descriptor APP2: Transmit LocalLink Footer Word 5, [3] p73 */
|
|
#define CDMAC_BD_APP2_TXCSINIT_POS 0
|
|
#define CDMAC_BD_APP2_TXCSINIT_MASK (0xFFFF << CDMAC_BD_APP2_TXCSINIT_POS)
|
|
|
|
/* CDMAC Descriptor APP0: Receive LocalLink Footer Word 3, [3] p73 */
|
|
#define CDMAC_BD_APP0_MADDRU_POS 0
|
|
#define CDMAC_BD_APP0_MADDRU_MASK (0xFFFF << CDMAC_BD_APP0_MADDRU_POS)
|
|
|
|
/* CDMAC Descriptor APP1: Receive LocalLink Footer Word 4, [3] p74 */
|
|
#define CDMAC_BD_APP1_MADDRL_POS 0
|
|
#define CDMAC_BD_APP1_MADDRL_MASK (~0UL << CDMAC_BD_APP1_MADDRL_POS)
|
|
|
|
/* CDMAC Descriptor APP2: Receive LocalLink Footer Word 5, [3] p74 */
|
|
#define CDMAC_BD_APP2_BCAST_FRAME (1 << 2)
|
|
#define CDMAC_BD_APP2_IPC_MCAST_FRAME (1 << 1)
|
|
#define CDMAC_BD_APP2_MAC_MCAST_FRAME (1 << 0)
|
|
|
|
/* CDMAC Descriptor APP3: Receive LocalLink Footer Word 6, [3] p74 */
|
|
#define CDMAC_BD_APP3_TLTPID_POS 16
|
|
#define CDMAC_BD_APP3_TLTPID_MASK (0xFFFF << CDMAC_BD_APP3_TLTPID_POS)
|
|
#define CDMAC_BD_APP3_RXCSRAW_POS 0
|
|
#define CDMAC_BD_APP3_RXCSRAW_MASK (0xFFFF << CDMAC_BD_APP3_RXCSRAW_POS)
|
|
|
|
/* CDMAC Descriptor APP4: Receive LocalLink Footer Word 7, [3] p74 */
|
|
#define CDMAC_BD_APP4_VLANTAG_POS 16
|
|
#define CDMAC_BD_APP4_VLANTAG_MASK (0xFFFF << CDMAC_BD_APP4_VLANTAG_POS)
|
|
#define CDMAC_BD_APP4_RXBYTECNT_POS 0
|
|
#define CDMAC_BD_APP4_RXBYTECNT_MASK (0x3FFF << CDMAC_BD_APP4_RXBYTECNT_POS)
|
|
|
|
/*
|
|
* SDMA Register Definition
|
|
*
|
|
* [0]: http://www.xilinx.com/support/documentation
|
|
*
|
|
* [1]: [0]/ip_documentation/mpmc.pdf
|
|
* page 54, SDMA Register Summary
|
|
* page 160, SDMA Registers
|
|
*
|
|
* [2]: [0]/user_guides/ug200.pdf
|
|
* page 244, DMA Controller -- Programming Interface and Registers
|
|
*/
|
|
#define SDMA_CTRL_REGTYPE u32
|
|
#define SDMA_CTRL_REGSIZE sizeof(SDMA_CTRL_REGTYPE)
|
|
struct sdma_ctrl {
|
|
/* Transmit Registers */
|
|
SDMA_CTRL_REGTYPE tx_nxtdesc_ptr; /* TX Next Description Pointer */
|
|
SDMA_CTRL_REGTYPE tx_curbuf_addr; /* TX Current Buffer Address */
|
|
SDMA_CTRL_REGTYPE tx_curbuf_length; /* TX Current Buffer Length */
|
|
SDMA_CTRL_REGTYPE tx_curdesc_ptr; /* TX Current Descriptor Pointer */
|
|
SDMA_CTRL_REGTYPE tx_taildesc_ptr; /* TX Tail Descriptor Pointer */
|
|
SDMA_CTRL_REGTYPE tx_chnl_ctrl; /* TX Channel Control */
|
|
SDMA_CTRL_REGTYPE tx_irq_reg; /* TX Interrupt Register */
|
|
SDMA_CTRL_REGTYPE tx_chnl_sts; /* TX Status Register */
|
|
/* Receive Registers */
|
|
SDMA_CTRL_REGTYPE rx_nxtdesc_ptr; /* RX Next Descriptor Pointer */
|
|
SDMA_CTRL_REGTYPE rx_curbuf_addr; /* RX Current Buffer Address */
|
|
SDMA_CTRL_REGTYPE rx_curbuf_length; /* RX Current Buffer Length */
|
|
SDMA_CTRL_REGTYPE rx_curdesc_ptr; /* RX Current Descriptor Pointer */
|
|
SDMA_CTRL_REGTYPE rx_taildesc_ptr; /* RX Tail Descriptor Pointer */
|
|
SDMA_CTRL_REGTYPE rx_chnl_ctrl; /* RX Channel Control */
|
|
SDMA_CTRL_REGTYPE rx_irq_reg; /* RX Interrupt Register */
|
|
SDMA_CTRL_REGTYPE rx_chnl_sts; /* RX Status Register */
|
|
/* Control Registers */
|
|
SDMA_CTRL_REGTYPE dma_control_reg; /* DMA Control Register */
|
|
};
|
|
|
|
#define SDMA_CTRL_REGNUMS sizeof(struct sdma_ctrl)/SDMA_CTRL_REGSIZE
|
|
|
|
/*
|
|
* DMAC Register Index Enumeration
|
|
*
|
|
* [2]: http://www.xilinx.com/support/documentation/user_guides/ug200.pdf
|
|
* page 244, DMA Controller -- Programming Interface and Registers
|
|
*/
|
|
enum dmac_ctrl {
|
|
/* Transmit Registers */
|
|
TX_NXTDESC_PTR = 0, /* TX Next Description Pointer */
|
|
TX_CURBUF_ADDR, /* TX Current Buffer Address */
|
|
TX_CURBUF_LENGTH, /* TX Current Buffer Length */
|
|
TX_CURDESC_PTR, /* TX Current Descriptor Pointer */
|
|
TX_TAILDESC_PTR, /* TX Tail Descriptor Pointer */
|
|
TX_CHNL_CTRL, /* TX Channel Control */
|
|
TX_IRQ_REG, /* TX Interrupt Register */
|
|
TX_CHNL_STS, /* TX Status Register */
|
|
/* Receive Registers */
|
|
RX_NXTDESC_PTR, /* RX Next Descriptor Pointer */
|
|
RX_CURBUF_ADDR, /* RX Current Buffer Address */
|
|
RX_CURBUF_LENGTH, /* RX Current Buffer Length */
|
|
RX_CURDESC_PTR, /* RX Current Descriptor Pointer */
|
|
RX_TAILDESC_PTR, /* RX Tail Descriptor Pointer */
|
|
RX_CHNL_CTRL, /* RX Channel Control */
|
|
RX_IRQ_REG, /* RX Interrupt Register */
|
|
RX_CHNL_STS, /* RX Status Register */
|
|
/* Control Registers */
|
|
DMA_CONTROL_REG /* DMA Control Register */
|
|
};
|
|
|
|
/* Rx/Tx Channel Control Register (*_chnl_ctrl), [1] p163, [2] p246/p252 */
|
|
#define CHNL_CTRL_ITO_POS 24
|
|
#define CHNL_CTRL_ITO_MASK (0xFF << CHNL_CTRL_ITO_POS)
|
|
#define CHNL_CTRL_IC_POS 16
|
|
#define CHNL_CTRL_IC_MASK (0xFF << CHNL_CTRL_IC_POS)
|
|
#define CHNL_CTRL_MSBADDR_POS 12
|
|
#define CHNL_CTRL_MSBADDR_MASK (0xF << CHNL_CTRL_MSBADDR_POS)
|
|
#define CHNL_CTRL_AME (1 << 11)
|
|
#define CHNL_CTRL_OBWC (1 << 10)
|
|
#define CHNL_CTRL_IOE (1 << 9)
|
|
#define CHNL_CTRL_LIC (1 << 8)
|
|
#define CHNL_CTRL_IE (1 << 7)
|
|
#define CHNL_CTRL_IEE (1 << 2)
|
|
#define CHNL_CTRL_IDE (1 << 1)
|
|
#define CHNL_CTRL_ICE (1 << 0)
|
|
|
|
/* All interrupt enable bits */
|
|
#define CHNL_CTRL_IRQ_MASK (CHNL_CTRL_IE | \
|
|
CHNL_CTRL_IEE | \
|
|
CHNL_CTRL_IDE | \
|
|
CHNL_CTRL_ICE)
|
|
|
|
/* Rx/Tx Interrupt Status Register (*_irq_reg), [1] p164, [2] p247/p253 */
|
|
#define IRQ_REG_DTV_POS 24
|
|
#define IRQ_REG_DTV_MASK (0xFF << IRQ_REG_DTV_POS)
|
|
#define IRQ_REG_CCV_POS 16
|
|
#define IRQ_REG_CCV_MASK (0xFF << IRQ_REG_CCV_POS)
|
|
#define IRQ_REG_WRCQ_EMPTY (1 << 14)
|
|
#define IRQ_REG_CIC_POS 10
|
|
#define IRQ_REG_CIC_MASK (0xF << IRQ_REG_CIC_POS)
|
|
#define IRQ_REG_DIC_POS 8
|
|
#define IRQ_REG_DIC_MASK (3 << 8)
|
|
#define IRQ_REG_PLB_RD_NMI (1 << 4)
|
|
#define IRQ_REG_PLB_WR_NMI (1 << 3)
|
|
#define IRQ_REG_EI (1 << 2)
|
|
#define IRQ_REG_DI (1 << 1)
|
|
#define IRQ_REG_CI (1 << 0)
|
|
|
|
/* All interrupt bits */
|
|
#define IRQ_REG_IRQ_MASK (IRQ_REG_PLB_RD_NMI | \
|
|
IRQ_REG_PLB_WR_NMI | \
|
|
IRQ_REG_EI | IRQ_REG_DI | IRQ_REG_CI)
|
|
|
|
/* Rx/Tx Channel Status Register (*_chnl_sts), [1] p165, [2] p249/p255 */
|
|
#define CHNL_STS_ERROR_TAIL (1 << 21)
|
|
#define CHNL_STS_ERROR_CMP (1 << 20)
|
|
#define CHNL_STS_ERROR_ADDR (1 << 19)
|
|
#define CHNL_STS_ERROR_NXTP (1 << 18)
|
|
#define CHNL_STS_ERROR_CURP (1 << 17)
|
|
#define CHNL_STS_ERROR_BSYWR (1 << 16)
|
|
#define CHNL_STS_ERROR (1 << 7)
|
|
#define CHNL_STS_IOE (1 << 6)
|
|
#define CHNL_STS_SOE (1 << 5)
|
|
#define CHNL_STS_CMPLT (1 << 4)
|
|
#define CHNL_STS_SOP (1 << 3)
|
|
#define CHNL_STS_EOP (1 << 2)
|
|
#define CHNL_STS_EBUSY (1 << 1)
|
|
|
|
/* DMA Control Register (dma_control_reg), [1] p166, [2] p256 */
|
|
#define DMA_CONTROL_PLBED (1 << 5)
|
|
#define DMA_CONTROL_RXOCEID (1 << 4)
|
|
#define DMA_CONTROL_TXOCEID (1 << 3)
|
|
#define DMA_CONTROL_TPE (1 << 2)
|
|
#define DMA_CONTROL_RESET (1 << 0)
|
|
|
|
#if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405)
|
|
|
|
/* Xilinx Device Control Register (DCR) in/out accessors */
|
|
unsigned ll_temac_xldcr_in32(phys_addr_t addr);
|
|
void ll_temac_xldcr_out32(phys_addr_t addr, unsigned value);
|
|
|
|
/* collect all register addresses for Xilinx DCR in/out accessors */
|
|
void ll_temac_collect_xldcr_sdma_reg_addr(struct eth_device *dev);
|
|
|
|
#endif /* CONFIG_XILINX_440 || CONFIG_XILINX_405 */
|
|
|
|
/* Xilinx Processor Local Bus (PLB) in/out accessors */
|
|
unsigned ll_temac_xlplb_in32(phys_addr_t base);
|
|
void ll_temac_xlplb_out32(phys_addr_t base, unsigned value);
|
|
|
|
/* collect all register addresses for Xilinx PLB in/out accessors */
|
|
void ll_temac_collect_xlplb_sdma_reg_addr(struct eth_device *dev);
|
|
|
|
/* initialize both Rx/Tx buffer descriptors */
|
|
int ll_temac_init_sdma(struct eth_device *dev);
|
|
|
|
/* halt both Rx/Tx transfers */
|
|
int ll_temac_halt_sdma(struct eth_device *dev);
|
|
|
|
/* reset SDMA and IRQ, disable interrupts and errors */
|
|
int ll_temac_reset_sdma(struct eth_device *dev);
|
|
|
|
/* receive buffered data from SDMA (polling ISR) */
|
|
int ll_temac_recv_sdma(struct eth_device *dev);
|
|
|
|
/* send buffered data to SDMA */
|
|
int ll_temac_send_sdma(struct eth_device *dev, volatile void *packet,
|
|
int length);
|
|
|
|
#endif /* _XILINX_LL_TEMAC_SDMA_ */
|