mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
191 lines
6.3 KiB
C
191 lines
6.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
|
|
*
|
|
* Copyright (C) 2006 Micronas GmbH
|
|
*/
|
|
|
|
#ifndef _SCC_H
|
|
#define _SCC_H
|
|
|
|
#define DMA_READ 0 /* SCC read DMA */
|
|
#define DMA_WRITE 1 /* SCC write DMA */
|
|
|
|
#define DMA_LINEAR 0 /* DMA linear buffer access method */
|
|
#define DMA_CYCLIC 1 /* DMA cyclic buffer access method */
|
|
|
|
#define DMA_START 0 /* DMA command - start DMA */
|
|
#define DMA_STOP 1 /* DMA command - stop DMA */
|
|
#define DMA_START_FH_RESET 2 /* DMA command - start DMA reset FH */
|
|
#define DMA_TAKEOVER 15 /* DMA command - commit the DMA conf */
|
|
|
|
#define AGU_ACTIVE 0 /* enable AGU address calculation */
|
|
#define AGU_BYPASS 1 /* set AGU to bypass mode */
|
|
|
|
#define USE_NO_FH 0 /* order the DMA to not use FH */
|
|
#define USE_FH 1 /* order the DMA to work with FH*/
|
|
|
|
#define SCC_DBG_IDLE 0 /* DEBUG status (idle interfaces) */
|
|
#define SCC_DBG_SYNC_RES 0x0001 /* synchronuous reset */
|
|
|
|
#define SCC_TO_IMMEDIATE 1 /* takeover command issued immediately*/
|
|
#define TO_DMA_CFG 2 /* takeover command for the DMA config*/
|
|
|
|
#define DMA_CMD_RESET 0
|
|
#define DMA_CMD_SETUP 1
|
|
#define DMA_CMD_START 2
|
|
#define DMA_CMD_STOP 3
|
|
|
|
#define DMA_STATE_RESET 0
|
|
#define DMA_STATE_SETUP 1
|
|
#define DMA_STATE_START 2
|
|
#define DMA_STATE_ERROR 3
|
|
|
|
#define SRMD 0
|
|
#define STRM_D 1
|
|
#define STRM_P 2
|
|
|
|
/*
|
|
* Slowest Monterey domain is DVP 27 MHz (324/27 = 12; 12*16 = 192 CPU clocks)
|
|
*/
|
|
#define RESET_TIME 2 /* cycle calc see in SCC_Reset */
|
|
|
|
struct scc_descriptor {
|
|
char *pu_name; /* PU identifier */
|
|
char *scc_instance; /* SCC Name */
|
|
u32 profile; /* SCC VCI_D profile */
|
|
|
|
u32 base_address; /* base address of the SCC unit reg shell*/
|
|
|
|
/* SCS Interconnect configuration */
|
|
u32 p_scc_id; /* instance number of SCC unit */
|
|
u32 p_mci_id; /* memory channel ID */
|
|
|
|
/* DMA Registers configuration */
|
|
u32 p_dma_channels_rd; /* Number of Read DMA channels */
|
|
u32 p_dma_channels_wr; /* Number of Write DMA channels */
|
|
|
|
u32 p_dma_packet_desc; /* Number of packet descriptors */
|
|
u32 p_dma_mci_desc; /* Number of MCI_CFG Descriptors */
|
|
|
|
int use_fh; /* the flag tells if SCC uses an FH */
|
|
|
|
int p_si2ocp_id; /* instance number of SI2OCP unit */
|
|
int hw_dma_cfg; /* HW or SW DMA config flag */
|
|
int hw_dma_start; /* HW or SW DMA start/stop flag */
|
|
|
|
u32 *buffer_tag_list; /* list of the buffer tags available */
|
|
u32 *csize_list; /* list of the valid CSIZE values */
|
|
};
|
|
|
|
struct scc_dma_state {
|
|
u32 scc_id:8; /* SCC id */
|
|
u32 dma_id:8; /* DMA id, used for match with array idx*/
|
|
u32 buffer_tag:8; /* mem buf tag, assigned to this DMA */
|
|
u32 dma_status:2; /* state of DMA, of the DMA_STATE_ const*/
|
|
u32 dma_drs:2; /* DMA dir, either DMA_READ or DMA_WRITE*/
|
|
u32 dma_cmd:4; /* last executed command on this DMA */
|
|
};
|
|
|
|
union scc_cmd {
|
|
u32 reg;
|
|
struct {
|
|
u32 res1:19; /* reserved */
|
|
u32 drs:1; /* DMA Register Set */
|
|
u32 rid:2; /* Register Identifier */
|
|
u32 id:6; /* DMA Identifier */
|
|
u32 action:4; /* DMA Command encoding */
|
|
} bits;
|
|
};
|
|
|
|
union scc_dma_cfg {
|
|
u32 reg;
|
|
struct {
|
|
u32 res1:17; /* reserved */
|
|
u32 agu_mode:1; /* AGU Mode */
|
|
u32 res2:1; /* reserved */
|
|
u32 fh_mode:1; /* Fifo Handler */
|
|
u32 buffer_type:1; /* Defines type of mem buffers */
|
|
u32 mci_cfg_id:1; /* MCI_CFG register selector */
|
|
u32 packet_cfg_id:1; /* PACKET_CFG register selector */
|
|
u32 buffer_id:8; /* DMA Buffer Identifier */
|
|
} bits;
|
|
};
|
|
|
|
union scc_debug {
|
|
u32 reg;
|
|
struct {
|
|
u32 res1:20; /* reserved */
|
|
u32 arg:8; /* SCC Debug Command Argument (#) */
|
|
u32 cmd:4; /* SCC Debug Command Register */
|
|
} bits;
|
|
};
|
|
|
|
union scc_softwareconfiguration {
|
|
u32 reg;
|
|
struct {
|
|
u32 res1:28; /* reserved */
|
|
u32 clock_status:1; /* clock on/off */
|
|
u32 packet_select:1; /* active SCC packet id */
|
|
u32 enable_status:1; /* enabled [1/0] */
|
|
u32 active_status:1; /* 1=active 0=reset */
|
|
} bits;
|
|
};
|
|
|
|
/*
|
|
* System on Chip Channel ID
|
|
*/
|
|
enum scc_id {
|
|
SCC_NULL = -1, /* illegal SCC identifier */
|
|
SCC_FE_3DCOMB_WR, /* SCC_FE_3DCOMB Write channel */
|
|
SCC_FE_3DCOMB_RD, /* SCC_FE_3DCOMB Read channel */
|
|
SCC_DI_TNR_WR, /* SCC_DI_TNR Write channel */
|
|
SCC_DI_TNR_FIELD_RD, /* SCC_DI_TNR_FIELD Read channel */
|
|
SCC_DI_TNR_FRAME_RD, /* SCC_DI_TNR_FRAME Read channel */
|
|
SCC_DI_MVAL_WR, /* SCC_DI_MVAL Write channel */
|
|
SCC_DI_MVAL_RD, /* SCC_DI_MVAL Read channel */
|
|
SCC_RC_FRAME_WR, /* SCC_RC_FRAME Write channel */
|
|
SCC_RC_FRAME0_RD, /* SCC_RC_FRAME0 Read channel */
|
|
SCC_OPT_FIELD0_RD, /* SCC_OPT_FIELD0 Read channel */
|
|
SCC_OPT_FIELD1_RD, /* SCC_OPT_FIELD1 Read channel */
|
|
SCC_OPT_FIELD2_RD, /* SCC_OPT_FIELD2 Read channel */
|
|
SCC_PIP_FRAME_WR, /* SCC_PIP_FRAME Write channel */
|
|
SCC_PIP_FRAME_RD, /* SCC_PIP_FRAME Read channel */
|
|
SCC_DP_AGPU_RD, /* SCC_DP_AGPU Read channel */
|
|
SCC_EWARP_RW, /* SCC_EWARP Read/Write channel */
|
|
SCC_DP_OSD_RD, /* SCC_DP_OSD Read channel */
|
|
SCC_DP_GRAPHIC_RD, /* SCC_DP_GRAPHIC Read channel */
|
|
SCC_DVP_OSD_RD, /* SCC_DVP_OSD Read channel */
|
|
SCC_DVP_VBI_RD, /* SCC_DVP_VBI Read channel */
|
|
SCC_TSIO_WR, /* SCC_TSIO Write channel */
|
|
SCC_TSIO_RD, /* SCC_TSIO Read channel */
|
|
SCC_TSD_WR, /* SCC_TSD Write channel */
|
|
SCC_VD_UD_ST_RW, /* SCC_VD_UD_ST Read/Write channel */
|
|
SCC_VD_FRR_RD, /* SCC_VD_FRR Read channel */
|
|
SCC_VD_FRW_DISP_WR, /* SCC_VD_FRW_DISP Write channel */
|
|
SCC_MR_VD_M_Y_RD, /* SCC_MR_VD_M_Y Read channel */
|
|
SCC_MR_VD_M_C_RD, /* SCC_MR_VD_M_C Read channel */
|
|
SCC_MR_VD_S_Y_RD, /* SCC_MR_VD_S_Y Read channel */
|
|
SCC_MR_VD_S_C_RD, /* SCC_MR_VD_S_C Read channel */
|
|
SCC_GA_WR, /* SCC_GA Write channel */
|
|
SCC_GA_SRC1_RD, /* SCC_GA_SRC1 Read channel */
|
|
SCC_GA_SRC2_RD, /* SCC_GA_SRC2 Read channel */
|
|
SCC_AD_RD, /* SCC_AD Read channel */
|
|
SCC_AD_WR, /* SCC_AD Write channel */
|
|
SCC_ABP_RD, /* SCC_ABP Read channel */
|
|
SCC_ABP_WR, /* SCC_ABP Write channel */
|
|
SCC_EBI_RW, /* SCC_EBI Read/Write channel */
|
|
SCC_USB_RW, /* SCC_USB Read/Write channel */
|
|
SCC_CPU1_SPDMA_RW, /* SCC_CPU1_SPDMA Read/Write channel */
|
|
SCC_CPU1_BRIDGE_RW, /* SCC_CPU1_BRIDGE Read/Write channel */
|
|
SCC_MAX /* maximum limit on the SCC id */
|
|
};
|
|
|
|
int scc_set_usb_address_generation_mode(u32 agu_mode);
|
|
int scc_dma_cmd(enum scc_id id, u32 cmd, u32 dma_id, u32 drs);
|
|
int scc_setup_dma(enum scc_id id, u32 buffer_tag,
|
|
u32 type, u32 fh_mode, u32 drs, u32 dma_id);
|
|
int scc_enable(enum scc_id id, u32 value);
|
|
int scc_reset(enum scc_id id, u32 value);
|
|
|
|
#endif /* _SCC_H */
|