u-boot/include/asm-sparc/io.h
Kumar Gala 65e43a1063 Introduce virt_to_phys()
virt_to_phys() returns the physical address given a virtual. In most
cases this will be just the input value as the vast majority of
systems run in a 1:1 mode.

However in systems that are not running this way it should report the
physical address or ~0 if no mapping exists for the given virtual
address.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15 22:04:29 +01:00

98 lines
2.9 KiB
C

/* SPARC I/O definitions
*
* (C) Copyright 2007
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#ifndef _SPARC_IO_H
#define _SPARC_IO_H
/* Nothing to sync, total store ordering (TSO)... */
#define sync()
/* Forces a cache miss on read/load.
* On some architectures we need to bypass the cache when reading
* I/O registers so that we are not reading the same status word
* over and over again resulting in a hang (until an IRQ if lucky)
*
*/
#ifndef CONFIG_SYS_HAS_NO_CACHE
#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)(var))
#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)(var))
#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)(var))
#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)(var))
#else
#define READ_BYTE(var) (var)
#define READ_HWORD(var) (var)
#define READ_WORD(var) (var)
#define READ_DWORD(var) (var)
#endif
/*
* Generic virtual read/write.
*/
#define __arch_getb(a) (READ_BYTE(a))
#define __arch_getw(a) (READ_HWORD(a))
#define __arch_getl(a) (READ_WORD(a))
#define __arch_getq(a) (READ_DWORD(a))
#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v))
#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
#define __raw_writeb(v,a) __arch_putb(v,a)
#define __raw_writew(v,a) __arch_putw(v,a)
#define __raw_writel(v,a) __arch_putl(v,a)
#define __raw_readb(a) __arch_getb(a)
#define __raw_readw(a) __arch_getw(a)
#define __raw_readl(a) __arch_getl(a)
#define __raw_readq(a) __arch_getq(a)
/*
* Given a physical address and a length, return a virtual address
* that can be used to access the memory range with the caching
* properties specified by "flags".
*/
#define MAP_NOCACHE (0)
#define MAP_WRCOMBINE (0)
#define MAP_WRBACK (0)
#define MAP_WRTHROUGH (0)
static inline void *map_physmem(phys_addr_t paddr, unsigned long len,
unsigned long flags)
{
return (void *)paddr;
}
/*
* Take down a mapping set up by map_physmem().
*/
static inline void unmap_physmem(void *vaddr, unsigned long flags)
{
}
static inline phys_addr_t virt_to_phys(void * vaddr)
{
return (phys_addr_t)(vaddr);
}
#endif