mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
171 lines
4.3 KiB
C
171 lines
4.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2009
|
|
* Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
|
|
*/
|
|
|
|
#ifndef _SPEAR_COMMON_H
|
|
#define _SPEAR_COMMON_H
|
|
/*
|
|
* Common configurations used for both spear3xx as well as spear6xx
|
|
*/
|
|
|
|
/* U-Boot Load Address */
|
|
|
|
/* Ethernet driver configuration */
|
|
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
|
|
|
|
/* USBD driver configuration */
|
|
#if defined(CONFIG_SPEAR_USBTTY)
|
|
#define CONFIG_DW_UDC
|
|
#define CONFIG_USB_DEVICE
|
|
#define CONFIG_USBD_HS
|
|
#define CONFIG_USB_TTY
|
|
|
|
#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
|
|
#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
|
|
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
|
|
|
|
/* I2C driver configuration */
|
|
#define CONFIG_SYS_I2C
|
|
#if defined(CONFIG_SPEAR600)
|
|
#define CONFIG_SYS_I2C_BASE 0xD0200000
|
|
#elif defined(CONFIG_SPEAR300)
|
|
#define CONFIG_SYS_I2C_BASE 0xD0180000
|
|
#elif defined(CONFIG_SPEAR310)
|
|
#define CONFIG_SYS_I2C_BASE 0xD0180000
|
|
#elif defined(CONFIG_SPEAR320)
|
|
#define CONFIG_SYS_I2C_BASE 0xD0180000
|
|
#endif
|
|
#define CONFIG_SYS_I2C_SPEED 400000
|
|
#define CONFIG_SYS_I2C_SLAVE 0x02
|
|
|
|
#define CONFIG_I2C_CHIPADDRESS 0x50
|
|
|
|
/* Timer, HZ specific defines */
|
|
|
|
/* Flash configuration */
|
|
#if defined(CONFIG_FLASH_PNOR)
|
|
#define CONFIG_SPEAR_EMI
|
|
#else
|
|
#define CONFIG_ST_SMI
|
|
#endif
|
|
|
|
#if defined(CONFIG_ST_SMI)
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2
|
|
#define CONFIG_SYS_FLASH_BASE 0xF8000000
|
|
#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000
|
|
#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
|
|
#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
|
|
CONFIG_SYS_CS1_FLASH_BASE}
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Serial Configuration (PL011)
|
|
* CONFIG_PL01x_PORTS is defined in specific files
|
|
*/
|
|
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
|
|
57600, 115200 }
|
|
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
/* NAND FLASH Configuration */
|
|
#define CONFIG_SYS_NAND_SELF_INIT
|
|
#define CONFIG_NAND_FSMC
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
/*
|
|
* Default Environment Varible definitions
|
|
*/
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/*
|
|
* U-Boot Environment placing definitions.
|
|
*/
|
|
#if defined(CONFIG_ENV_IS_IN_FLASH)
|
|
#ifdef CONFIG_ST_SMI
|
|
/*
|
|
* Environment is in serial NOR flash
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_LEN 0x00040000
|
|
#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
|
|
|
|
#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
|
|
|
|
#elif defined(CONFIG_SPEAR_EMI)
|
|
/*
|
|
* Environment is in parallel NOR flash
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_LEN 0x00060000
|
|
#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
|
|
|
|
#define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \
|
|
"0x4C0000; bootm 0x1600000"
|
|
#endif
|
|
#elif defined(CONFIG_ENV_IS_IN_NAND)
|
|
/*
|
|
* Environment is in NAND
|
|
*/
|
|
|
|
#define CONFIG_ENV_RANGE 0x10000
|
|
#define CONFIG_FSMTDBLK "/dev/mtdblock7 "
|
|
|
|
#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
|
|
"0x80000 0x4C0000; " \
|
|
"bootm 0x1600000"
|
|
#endif
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"bootp; " \
|
|
"setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$(serverip):$(rootpath) " \
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
|
|
"$(netmask):$(hostname):$(netdev):off " \
|
|
"console=ttyAMA0,115200 $(othbootargs);" \
|
|
"bootm; "
|
|
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=ttyAMA0,115200 $(othbootargs);" \
|
|
CONFIG_BOOTCOMMAND
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00800000
|
|
#define CONFIG_SYS_MEMTEST_END 0x04000000
|
|
#define CONFIG_SYS_MALLOC_LEN (1024*1024)
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00800000
|
|
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM_1 0x00000000
|
|
#define PHYS_SDRAM_1_MAXSIZE 0x40000000
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#endif
|