u-boot/cpu/mpc8xx/interrupts.c
wdenk 2535d60277 * Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
2003-07-17 23:16:40 +00:00

395 lines
8.9 KiB
C

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <mpc8xx.h>
#include <mpc8xx_irq.h>
#include <asm/processor.h>
#include <commproc.h>
/************************************************************************/
unsigned decrementer_count; /* count value for 1e6/HZ microseconds */
/************************************************************************/
/*
* CPM interrupt vector functions.
*/
struct interrupt_action {
interrupt_handler_t *handler;
void *arg;
};
static struct interrupt_action cpm_vecs[CPMVEC_NR];
static struct interrupt_action irq_vecs[NR_IRQS];
static void cpm_interrupt_init (void);
static void cpm_interrupt (void *regs);
/************************************************************************/
static __inline__ unsigned long get_msr (void)
{
unsigned long msr;
asm volatile ("mfmsr %0":"=r" (msr):);
return msr;
}
static __inline__ void set_msr (unsigned long msr)
{
asm volatile ("mtmsr %0"::"r" (msr));
}
static __inline__ unsigned long get_dec (void)
{
unsigned long val;
asm volatile ("mfdec %0":"=r" (val):);
return val;
}
static __inline__ void set_dec (unsigned long val)
{
asm volatile ("mtdec %0"::"r" (val));
}
void enable_interrupts (void)
{
set_msr (get_msr () | MSR_EE);
}
/* returns flag if MSR_EE was set before */
int disable_interrupts (void)
{
ulong msr = get_msr ();
set_msr (msr & ~MSR_EE);
return ((msr & MSR_EE) != 0);
}
/************************************************************************/
int interrupt_init (void)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
decrementer_count = get_tbclk () / CFG_HZ;
/* disable all interrupts */
immr->im_siu_conf.sc_simask = 0;
/* Configure CPM interrupts */
cpm_interrupt_init ();
set_dec (decrementer_count);
set_msr (get_msr () | MSR_EE);
return (0);
}
/************************************************************************/
/*
* Handle external interrupts
*/
void external_interrupt (struct pt_regs *regs)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
int irq;
ulong simask, newmask;
ulong vec, v_bit;
/*
* read the SIVEC register and shift the bits down
* to get the irq number
*/
vec = immr->im_siu_conf.sc_sivec;
irq = vec >> 26;
v_bit = 0x80000000UL >> irq;
/*
* Read Interrupt Mask Register and Mask Interrupts
*/
simask = immr->im_siu_conf.sc_simask;
newmask = simask & (~(0xFFFF0000 >> irq));
immr->im_siu_conf.sc_simask = newmask;
if (!(irq & 0x1)) { /* External Interrupt ? */
ulong siel;
/*
* Read Interrupt Edge/Level Register
*/
siel = immr->im_siu_conf.sc_siel;
if (siel & v_bit) { /* edge triggered interrupt ? */
/*
* Rewrite SIPEND Register to clear interrupt
*/
immr->im_siu_conf.sc_sipend = v_bit;
}
}
if (irq_vecs[irq].handler != NULL) {
irq_vecs[irq].handler (irq_vecs[irq].arg);
} else {
printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
irq, vec);
/* turn off the bogus interrupt to avoid it from now */
simask &= ~v_bit;
}
/*
* Re-Enable old Interrupt Mask
*/
immr->im_siu_conf.sc_simask = simask;
}
/************************************************************************/
/*
* CPM interrupt handler
*/
static void cpm_interrupt (void *regs)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
uint vec;
/*
* Get the vector by setting the ACK bit
* and then reading the register.
*/
immr->im_cpic.cpic_civr = 1;
vec = immr->im_cpic.cpic_civr;
vec >>= 11;
if (cpm_vecs[vec].handler != NULL) {
(*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
} else {
immr->im_cpic.cpic_cimr &= ~(1 << vec);
printf ("Masking bogus CPM interrupt vector 0x%x\n", vec);
}
/*
* After servicing the interrupt,
* we have to remove the status indicator.
*/
immr->im_cpic.cpic_cisr |= (1 << vec);
}
/*
* The CPM can generate the error interrupt when there is a race
* condition between generating and masking interrupts. All we have
* to do is ACK it and return. This is a no-op function so we don't
* need any special tests in the interrupt handler.
*/
static void cpm_error_interrupt (void *dummy)
{
}
/************************************************************************/
/*
* Install and free an interrupt handler
*/
void irq_install_handler (int vec, interrupt_handler_t * handler,
void *arg)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
if ((vec & CPMVEC_OFFSET) != 0) {
/* CPM interrupt */
vec &= 0xffff;
if (cpm_vecs[vec].handler != NULL) {
printf ("CPM interrupt 0x%x replacing 0x%x\n",
(uint) handler,
(uint) cpm_vecs[vec].handler);
}
cpm_vecs[vec].handler = handler;
cpm_vecs[vec].arg = arg;
immr->im_cpic.cpic_cimr |= (1 << vec);
#if 0
printf ("Install CPM interrupt for vector %d ==> %p\n",
vec, handler);
#endif
} else {
/* SIU interrupt */
if (irq_vecs[vec].handler != NULL) {
printf ("SIU interrupt %d 0x%x replacing 0x%x\n",
vec,
(uint) handler,
(uint) cpm_vecs[vec].handler);
}
irq_vecs[vec].handler = handler;
irq_vecs[vec].arg = arg;
immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
#if 0
printf ("Install SIU interrupt for vector %d ==> %p\n",
vec, handler);
#endif
}
}
void irq_free_handler (int vec)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
if ((vec & CPMVEC_OFFSET) != 0) {
/* CPM interrupt */
vec &= 0xffff;
#if 0
printf ("Free CPM interrupt for vector %d ==> %p\n",
vec, cpm_vecs[vec].handler);
#endif
immr->im_cpic.cpic_cimr &= ~(1 << vec);
cpm_vecs[vec].handler = NULL;
cpm_vecs[vec].arg = NULL;
} else {
/* SIU interrupt */
#if 0
printf ("Free CPM interrupt for vector %d ==> %p\n",
vec, cpm_vecs[vec].handler);
#endif
immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
}
}
/************************************************************************/
static void cpm_interrupt_init (void)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
/*
* Initialize the CPM interrupt controller.
*/
immr->im_cpic.cpic_cicr =
(CICR_SCD_SCC4 |
CICR_SCC_SCC3 |
CICR_SCB_SCC2 |
CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
immr->im_cpic.cpic_cimr = 0;
/*
* Install the error handler.
*/
irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL);
immr->im_cpic.cpic_cicr |= CICR_IEN;
/*
* Install the cpm interrupt handler
*/
irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL);
}
/************************************************************************/
volatile ulong timestamp = 0;
/*
* timer_interrupt - gets called when the decrementer overflows,
* with interrupts disabled.
* Trivial implementation - no need to be really accurate.
*/
void timer_interrupt (struct pt_regs *regs)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
#ifdef CONFIG_STATUS_LED
extern void status_led_tick (ulong);
#endif
#if 0
printf ("*** Timer Interrupt *** ");
#endif
/* Reset Timer Expired and Timers Interrupt Status */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
__asm__ ("nop");
#ifdef CONFIG_MPC866_et_al
immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
#else
immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
#endif
/* Restore Decrementer Count */
set_dec (decrementer_count);
timestamp++;
#ifdef CONFIG_STATUS_LED
status_led_tick (timestamp);
#endif /* CONFIG_STATUS_LED */
#if defined(CONFIG_WATCHDOG) || defined(CFG_CMA_LCD_HEARTBEAT)
/*
* The shortest watchdog period of all boards (except LWMON)
* is approx. 1 sec, thus re-trigger watchdog at least
* every 500 ms = CFG_HZ / 2
*/
#ifndef CONFIG_LWMON
if ((timestamp % (CFG_HZ / 2)) == 0) {
#else
if ((timestamp % (CFG_HZ / 20)) == 0) {
#endif
#if defined(CFG_CMA_LCD_HEARTBEAT)
extern void lcd_heartbeat (void);
lcd_heartbeat ();
#endif /* CFG_CMA_LCD_HEARTBEAT */
#if defined(CONFIG_WATCHDOG)
reset_8xx_watchdog (immr);
#endif /* CONFIG_WATCHDOG */
}
#endif /* CONFIG_WATCHDOG || CFG_CMA_LCD_HEARTBEAT */
}
/************************************************************************/
void reset_timer (void)
{
timestamp = 0;
}
ulong get_timer (ulong base)
{
return (timestamp - base);
}
void set_timer (ulong t)
{
timestamp = t;
}
/************************************************************************/