mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
d7a184d4a7
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
136 lines
2.6 KiB
C
136 lines
2.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
|
|
* Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <timer.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
/* Timer control1 register */
|
|
#define CR1_CEN BIT(0)
|
|
#define CR1_ARPE BIT(7)
|
|
|
|
/* Event Generation Register register */
|
|
#define EGR_UG BIT(0)
|
|
|
|
/* Auto reload register for free running config */
|
|
#define GPT_FREE_RUNNING 0xFFFFFFFF
|
|
|
|
struct stm32_timer_regs {
|
|
u32 cr1;
|
|
u32 cr2;
|
|
u32 smcr;
|
|
u32 dier;
|
|
u32 sr;
|
|
u32 egr;
|
|
u32 ccmr1;
|
|
u32 ccmr2;
|
|
u32 ccer;
|
|
u32 cnt;
|
|
u32 psc;
|
|
u32 arr;
|
|
u32 reserved;
|
|
u32 ccr1;
|
|
u32 ccr2;
|
|
u32 ccr3;
|
|
u32 ccr4;
|
|
u32 reserved1;
|
|
u32 dcr;
|
|
u32 dmar;
|
|
u32 tim2_5_or;
|
|
};
|
|
|
|
struct stm32_timer_priv {
|
|
struct stm32_timer_regs *base;
|
|
};
|
|
|
|
static int stm32_timer_get_count(struct udevice *dev, u64 *count)
|
|
{
|
|
struct stm32_timer_priv *priv = dev_get_priv(dev);
|
|
struct stm32_timer_regs *regs = priv->base;
|
|
|
|
*count = readl(®s->cnt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_timer_probe(struct udevice *dev)
|
|
{
|
|
struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct stm32_timer_priv *priv = dev_get_priv(dev);
|
|
struct stm32_timer_regs *regs;
|
|
struct clk clk;
|
|
fdt_addr_t addr;
|
|
int ret;
|
|
u32 rate, psc;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
priv->base = (struct stm32_timer_regs *)addr;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
regs = priv->base;
|
|
|
|
/* Stop the timer */
|
|
clrbits_le32(®s->cr1, CR1_CEN);
|
|
|
|
/* get timer clock */
|
|
rate = clk_get_rate(&clk);
|
|
|
|
/* we set timer prescaler to obtain a 1MHz timer counter frequency */
|
|
psc = (rate / CONFIG_SYS_HZ_CLOCK) - 1;
|
|
writel(psc, ®s->psc);
|
|
|
|
/* Set timer frequency to 1MHz */
|
|
uc_priv->clock_rate = CONFIG_SYS_HZ_CLOCK;
|
|
|
|
/* Configure timer for auto-reload */
|
|
setbits_le32(®s->cr1, CR1_ARPE);
|
|
|
|
/* load value for auto reload */
|
|
writel(GPT_FREE_RUNNING, ®s->arr);
|
|
|
|
/* start timer */
|
|
setbits_le32(®s->cr1, CR1_CEN);
|
|
|
|
/* Update generation */
|
|
setbits_le32(®s->egr, EGR_UG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct timer_ops stm32_timer_ops = {
|
|
.get_count = stm32_timer_get_count,
|
|
};
|
|
|
|
static const struct udevice_id stm32_timer_ids[] = {
|
|
{ .compatible = "st,stm32-timer" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(stm32_timer) = {
|
|
.name = "stm32_timer",
|
|
.id = UCLASS_TIMER,
|
|
.of_match = stm32_timer_ids,
|
|
.priv_auto_alloc_size = sizeof(struct stm32_timer_priv),
|
|
.probe = stm32_timer_probe,
|
|
.ops = &stm32_timer_ops,
|
|
};
|
|
|