mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
4687919684
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
235 lines
5.7 KiB
C
235 lines
5.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
|
|
* Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <common.h>
|
|
#include <debug_uart.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <linux/compiler.h>
|
|
#include <serial.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define ZYNQ_UART_SR_TXACTIVE BIT(11) /* TX active */
|
|
#define ZYNQ_UART_SR_TXFULL BIT(4) /* TX FIFO full */
|
|
#define ZYNQ_UART_SR_RXEMPTY BIT(1) /* RX FIFO empty */
|
|
|
|
#define ZYNQ_UART_CR_TX_EN BIT(4) /* TX enabled */
|
|
#define ZYNQ_UART_CR_RX_EN BIT(2) /* RX enabled */
|
|
#define ZYNQ_UART_CR_TXRST BIT(1) /* TX logic reset */
|
|
#define ZYNQ_UART_CR_RXRST BIT(0) /* RX logic reset */
|
|
|
|
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
|
|
|
|
struct uart_zynq {
|
|
u32 control; /* 0x0 - Control Register [8:0] */
|
|
u32 mode; /* 0x4 - Mode Register [10:0] */
|
|
u32 reserved1[4];
|
|
u32 baud_rate_gen; /* 0x18 - Baud Rate Generator [15:0] */
|
|
u32 reserved2[4];
|
|
u32 channel_sts; /* 0x2c - Channel Status [11:0] */
|
|
u32 tx_rx_fifo; /* 0x30 - FIFO [15:0] or [7:0] */
|
|
u32 baud_rate_divider; /* 0x34 - Baud Rate Divider [7:0] */
|
|
};
|
|
|
|
struct zynq_uart_platdata {
|
|
struct uart_zynq *regs;
|
|
};
|
|
|
|
/* Set up the baud rate in gd struct */
|
|
static void _uart_zynq_serial_setbrg(struct uart_zynq *regs,
|
|
unsigned long clock, unsigned long baud)
|
|
{
|
|
/* Calculation results. */
|
|
unsigned int calc_bauderror, bdiv, bgen;
|
|
unsigned long calc_baud = 0;
|
|
|
|
/* Covering case where input clock is so slow */
|
|
if (clock < 1000000 && baud > 4800)
|
|
baud = 4800;
|
|
|
|
/* master clock
|
|
* Baud rate = ------------------
|
|
* bgen * (bdiv + 1)
|
|
*
|
|
* Find acceptable values for baud generation.
|
|
*/
|
|
for (bdiv = 4; bdiv < 255; bdiv++) {
|
|
bgen = clock / (baud * (bdiv + 1));
|
|
if (bgen < 2 || bgen > 65535)
|
|
continue;
|
|
|
|
calc_baud = clock / (bgen * (bdiv + 1));
|
|
|
|
/*
|
|
* Use first calculated baudrate with
|
|
* an acceptable (<3%) error
|
|
*/
|
|
if (baud > calc_baud)
|
|
calc_bauderror = baud - calc_baud;
|
|
else
|
|
calc_bauderror = calc_baud - baud;
|
|
if (((calc_bauderror * 100) / baud) < 3)
|
|
break;
|
|
}
|
|
|
|
writel(bdiv, ®s->baud_rate_divider);
|
|
writel(bgen, ®s->baud_rate_gen);
|
|
}
|
|
|
|
/* Initialize the UART, with...some settings. */
|
|
static void _uart_zynq_serial_init(struct uart_zynq *regs)
|
|
{
|
|
/* RX/TX enabled & reset */
|
|
writel(ZYNQ_UART_CR_TX_EN | ZYNQ_UART_CR_RX_EN | ZYNQ_UART_CR_TXRST | \
|
|
ZYNQ_UART_CR_RXRST, ®s->control);
|
|
writel(ZYNQ_UART_MR_PARITY_NONE, ®s->mode); /* 8 bit, no parity */
|
|
}
|
|
|
|
static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c)
|
|
{
|
|
if (readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL)
|
|
return -EAGAIN;
|
|
|
|
writel(c, ®s->tx_rx_fifo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct zynq_uart_platdata *platdata = dev_get_platdata(dev);
|
|
unsigned long clock;
|
|
|
|
int ret;
|
|
struct clk clk;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to get clock\n");
|
|
return ret;
|
|
}
|
|
|
|
clock = clk_get_rate(&clk);
|
|
if (IS_ERR_VALUE(clock)) {
|
|
dev_err(dev, "failed to get rate\n");
|
|
return clock;
|
|
}
|
|
debug("%s: CLK %ld\n", __func__, clock);
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret && ret != -ENOSYS) {
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
_uart_zynq_serial_setbrg(platdata->regs, clock, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_serial_probe(struct udevice *dev)
|
|
{
|
|
struct zynq_uart_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
/* No need to reinitialize the UART after relocation */
|
|
if (gd->flags & GD_FLG_RELOC)
|
|
return 0;
|
|
|
|
_uart_zynq_serial_init(platdata->regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_serial_getc(struct udevice *dev)
|
|
{
|
|
struct zynq_uart_platdata *platdata = dev_get_platdata(dev);
|
|
struct uart_zynq *regs = platdata->regs;
|
|
|
|
if (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY)
|
|
return -EAGAIN;
|
|
|
|
return readl(®s->tx_rx_fifo);
|
|
}
|
|
|
|
static int zynq_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct zynq_uart_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
return _uart_zynq_serial_putc(platdata->regs, ch);
|
|
}
|
|
|
|
static int zynq_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct zynq_uart_platdata *platdata = dev_get_platdata(dev);
|
|
struct uart_zynq *regs = platdata->regs;
|
|
|
|
if (input)
|
|
return !(readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY);
|
|
else
|
|
return !!(readl(®s->channel_sts) & ZYNQ_UART_SR_TXACTIVE);
|
|
}
|
|
|
|
static int zynq_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct zynq_uart_platdata *platdata = dev_get_platdata(dev);
|
|
|
|
platdata->regs = (struct uart_zynq *)dev_read_addr(dev);
|
|
if (IS_ERR(platdata->regs))
|
|
return PTR_ERR(platdata->regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops zynq_serial_ops = {
|
|
.putc = zynq_serial_putc,
|
|
.pending = zynq_serial_pending,
|
|
.getc = zynq_serial_getc,
|
|
.setbrg = zynq_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id zynq_serial_ids[] = {
|
|
{ .compatible = "xlnx,xuartps" },
|
|
{ .compatible = "cdns,uart-r1p8" },
|
|
{ .compatible = "cdns,uart-r1p12" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_zynq) = {
|
|
.name = "serial_zynq",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = zynq_serial_ids,
|
|
.ofdata_to_platdata = zynq_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct zynq_uart_platdata),
|
|
.probe = zynq_serial_probe,
|
|
.ops = &zynq_serial_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_UART_ZYNQ
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct uart_zynq *regs = (struct uart_zynq *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
_uart_zynq_serial_init(regs);
|
|
_uart_zynq_serial_setbrg(regs, CONFIG_DEBUG_UART_CLOCK,
|
|
CONFIG_BAUDRATE);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct uart_zynq *regs = (struct uart_zynq *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
while (_uart_zynq_serial_putc(regs, ch) == -EAGAIN)
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|