mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
4687919684
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
173 lines
3.6 KiB
C
173 lines
3.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <serial.h>
|
|
#include <asm/io.h>
|
|
|
|
struct mvebu_platdata {
|
|
void __iomem *base;
|
|
};
|
|
|
|
/*
|
|
* Register offset
|
|
*/
|
|
#define UART_RX_REG 0x00
|
|
#define UART_TX_REG 0x04
|
|
#define UART_CTRL_REG 0x08
|
|
#define UART_STATUS_REG 0x0c
|
|
#define UART_BAUD_REG 0x10
|
|
#define UART_POSSR_REG 0x14
|
|
|
|
#define UART_STATUS_RX_RDY 0x10
|
|
#define UART_STATUS_TXFIFO_FULL 0x800
|
|
|
|
#define UART_CTRL_RXFIFO_RESET 0x4000
|
|
#define UART_CTRL_TXFIFO_RESET 0x8000
|
|
|
|
#define CONFIG_UART_BASE_CLOCK 25804800
|
|
|
|
static int mvebu_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct mvebu_platdata *plat = dev_get_platdata(dev);
|
|
void __iomem *base = plat->base;
|
|
|
|
while (readl(base + UART_STATUS_REG) & UART_STATUS_TXFIFO_FULL)
|
|
;
|
|
|
|
writel(ch, base + UART_TX_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_serial_getc(struct udevice *dev)
|
|
{
|
|
struct mvebu_platdata *plat = dev_get_platdata(dev);
|
|
void __iomem *base = plat->base;
|
|
|
|
while (!(readl(base + UART_STATUS_REG) & UART_STATUS_RX_RDY))
|
|
;
|
|
|
|
return readl(base + UART_RX_REG) & 0xff;
|
|
}
|
|
|
|
static int mvebu_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct mvebu_platdata *plat = dev_get_platdata(dev);
|
|
void __iomem *base = plat->base;
|
|
|
|
if (readl(base + UART_STATUS_REG) & UART_STATUS_RX_RDY)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct mvebu_platdata *plat = dev_get_platdata(dev);
|
|
void __iomem *base = plat->base;
|
|
|
|
/*
|
|
* Calculate divider
|
|
* baudrate = clock / 16 / divider
|
|
*/
|
|
writel(CONFIG_UART_BASE_CLOCK / baudrate / 16, base + UART_BAUD_REG);
|
|
|
|
/*
|
|
* Set Programmable Oversampling Stack to 0,
|
|
* UART defaults to 16x scheme
|
|
*/
|
|
writel(0, base + UART_POSSR_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_serial_probe(struct udevice *dev)
|
|
{
|
|
struct mvebu_platdata *plat = dev_get_platdata(dev);
|
|
void __iomem *base = plat->base;
|
|
|
|
/* reset FIFOs */
|
|
writel(UART_CTRL_RXFIFO_RESET | UART_CTRL_TXFIFO_RESET,
|
|
base + UART_CTRL_REG);
|
|
|
|
/* No Parity, 1 Stop */
|
|
writel(0, base + UART_CTRL_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct mvebu_platdata *plat = dev_get_platdata(dev);
|
|
|
|
plat->base = devfdt_get_addr_ptr(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops mvebu_serial_ops = {
|
|
.putc = mvebu_serial_putc,
|
|
.pending = mvebu_serial_pending,
|
|
.getc = mvebu_serial_getc,
|
|
.setbrg = mvebu_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id mvebu_serial_ids[] = {
|
|
{ .compatible = "marvell,armada-3700-uart" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_mvebu) = {
|
|
.name = "serial_mvebu",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = mvebu_serial_ids,
|
|
.ofdata_to_platdata = mvebu_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct mvebu_platdata),
|
|
.probe = mvebu_serial_probe,
|
|
.ops = &mvebu_serial_ops,
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_MVEBU_A3700_UART
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
/* reset FIFOs */
|
|
writel(UART_CTRL_RXFIFO_RESET | UART_CTRL_TXFIFO_RESET,
|
|
base + UART_CTRL_REG);
|
|
|
|
/* No Parity, 1 Stop */
|
|
writel(0, base + UART_CTRL_REG);
|
|
|
|
/*
|
|
* Calculate divider
|
|
* baudrate = clock / 16 / divider
|
|
*/
|
|
writel(CONFIG_UART_BASE_CLOCK / 115200 / 16, base + UART_BAUD_REG);
|
|
|
|
/*
|
|
* Set Programmable Oversampling Stack to 0,
|
|
* UART defaults to 16x scheme
|
|
*/
|
|
writel(0, base + UART_POSSR_REG);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
while (readl(base + UART_STATUS_REG) & UART_STATUS_TXFIFO_FULL)
|
|
;
|
|
|
|
writel(ch, base + UART_TX_REG);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
#endif
|