mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
b460b889e2
Serial port configuration was missing from previous implementation. It only worked because it was preconfigured by LK. This patch configures the uart for 115200 8N1. It also configures the pin mux for uart pins using DT bindings. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
241 lines
6.3 KiB
C
241 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Qualcomm UART driver
|
|
*
|
|
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
|
|
*
|
|
* UART will work in Data Mover mode.
|
|
* Based on Linux driver.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <serial.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <linux/compiler.h>
|
|
#include <dm/pinctrl.h>
|
|
|
|
/* Serial registers - this driver works in uartdm mode*/
|
|
|
|
#define UARTDM_DMRX 0x34 /* Max RX transfer length */
|
|
#define UARTDM_NCF_TX 0x40 /* Number of chars to TX */
|
|
|
|
#define UARTDM_RXFS 0x50 /* RX channel status register */
|
|
#define UARTDM_RXFS_BUF_SHIFT 0x7 /* Number of bytes in the packing buffer */
|
|
#define UARTDM_RXFS_BUF_MASK 0x7
|
|
#define UARTDM_MR1 0x00
|
|
#define UARTDM_MR2 0x04
|
|
#define UARTDM_CSR 0xA0
|
|
|
|
#define UARTDM_SR 0xA4 /* Status register */
|
|
#define UARTDM_SR_RX_READY (1 << 0) /* Word is the receiver FIFO */
|
|
#define UARTDM_SR_TX_EMPTY (1 << 3) /* Transmitter underrun */
|
|
#define UARTDM_SR_UART_OVERRUN (1 << 4) /* Receive overrun */
|
|
|
|
#define UARTDM_CR 0xA8 /* Command register */
|
|
#define UARTDM_CR_CMD_RESET_ERR (3 << 4) /* Clear overrun error */
|
|
#define UARTDM_CR_CMD_RESET_STALE_INT (8 << 4) /* Clears stale irq */
|
|
#define UARTDM_CR_CMD_RESET_TX_READY (3 << 8) /* Clears TX Ready irq*/
|
|
#define UARTDM_CR_CMD_FORCE_STALE (4 << 8) /* Causes stale event */
|
|
#define UARTDM_CR_CMD_STALE_EVENT_DISABLE (6 << 8) /* Disable stale event */
|
|
|
|
#define UARTDM_IMR 0xB0 /* Interrupt mask register */
|
|
#define UARTDM_ISR 0xB4 /* Interrupt status register */
|
|
#define UARTDM_ISR_TX_READY 0x80 /* TX FIFO empty */
|
|
|
|
#define UARTDM_TF 0x100 /* UART Transmit FIFO register */
|
|
#define UARTDM_RF 0x140 /* UART Receive FIFO register */
|
|
|
|
#define UART_DM_CLK_RX_TX_BIT_RATE 0xCC
|
|
#define MSM_BOOT_UART_DM_8_N_1_MODE 0x34
|
|
#define MSM_BOOT_UART_DM_CMD_RESET_RX 0x10
|
|
#define MSM_BOOT_UART_DM_CMD_RESET_TX 0x20
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct msm_serial_data {
|
|
phys_addr_t base;
|
|
unsigned chars_cnt; /* number of buffered chars */
|
|
uint32_t chars_buf; /* buffered chars */
|
|
};
|
|
|
|
static int msm_serial_fetch(struct udevice *dev)
|
|
{
|
|
struct msm_serial_data *priv = dev_get_priv(dev);
|
|
unsigned sr;
|
|
|
|
if (priv->chars_cnt)
|
|
return priv->chars_cnt;
|
|
|
|
/* Clear error in case of buffer overrun */
|
|
if (readl(priv->base + UARTDM_SR) & UARTDM_SR_UART_OVERRUN)
|
|
writel(UARTDM_CR_CMD_RESET_ERR, priv->base + UARTDM_CR);
|
|
|
|
/* We need to fetch new character */
|
|
sr = readl(priv->base + UARTDM_SR);
|
|
|
|
if (sr & UARTDM_SR_RX_READY) {
|
|
/* There are at least 4 bytes in fifo */
|
|
priv->chars_buf = readl(priv->base + UARTDM_RF);
|
|
priv->chars_cnt = 4;
|
|
} else {
|
|
/* Check if there is anything in fifo */
|
|
priv->chars_cnt = readl(priv->base + UARTDM_RXFS);
|
|
/* Extract number of characters in UART packing buffer*/
|
|
priv->chars_cnt = (priv->chars_cnt >>
|
|
UARTDM_RXFS_BUF_SHIFT) &
|
|
UARTDM_RXFS_BUF_MASK;
|
|
if (!priv->chars_cnt)
|
|
return 0;
|
|
|
|
/* There is at least one charcter, move it to fifo */
|
|
writel(UARTDM_CR_CMD_FORCE_STALE,
|
|
priv->base + UARTDM_CR);
|
|
|
|
priv->chars_buf = readl(priv->base + UARTDM_RF);
|
|
writel(UARTDM_CR_CMD_RESET_STALE_INT,
|
|
priv->base + UARTDM_CR);
|
|
writel(0x7, priv->base + UARTDM_DMRX);
|
|
}
|
|
|
|
return priv->chars_cnt;
|
|
}
|
|
|
|
static int msm_serial_getc(struct udevice *dev)
|
|
{
|
|
struct msm_serial_data *priv = dev_get_priv(dev);
|
|
char c;
|
|
|
|
if (!msm_serial_fetch(dev))
|
|
return -EAGAIN;
|
|
|
|
c = priv->chars_buf & 0xFF;
|
|
priv->chars_buf >>= 8;
|
|
priv->chars_cnt--;
|
|
|
|
return c;
|
|
}
|
|
|
|
static int msm_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct msm_serial_data *priv = dev_get_priv(dev);
|
|
|
|
if (!(readl(priv->base + UARTDM_SR) & UARTDM_SR_TX_EMPTY) &&
|
|
!(readl(priv->base + UARTDM_ISR) & UARTDM_ISR_TX_READY))
|
|
return -EAGAIN;
|
|
|
|
writel(UARTDM_CR_CMD_RESET_TX_READY, priv->base + UARTDM_CR);
|
|
|
|
writel(1, priv->base + UARTDM_NCF_TX);
|
|
writel(ch, priv->base + UARTDM_TF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
if (input) {
|
|
if (msm_serial_fetch(dev))
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops msm_serial_ops = {
|
|
.putc = msm_serial_putc,
|
|
.pending = msm_serial_pending,
|
|
.getc = msm_serial_getc,
|
|
};
|
|
|
|
static int msm_uart_clk_init(struct udevice *dev)
|
|
{
|
|
uint clk_rate = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
|
|
"clock-frequency", 115200);
|
|
uint clkd[2]; /* clk_id and clk_no */
|
|
int clk_offset;
|
|
struct udevice *clk_dev;
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), "clock",
|
|
clkd, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_offset = fdt_node_offset_by_phandle(gd->fdt_blob, clkd[0]);
|
|
if (clk_offset < 0)
|
|
return clk_offset;
|
|
|
|
ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk.id = clkd[1];
|
|
ret = clk_request(clk_dev, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_set_rate(&clk, clk_rate);
|
|
clk_free(&clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uart_dm_init(struct msm_serial_data *priv)
|
|
{
|
|
writel(UART_DM_CLK_RX_TX_BIT_RATE, priv->base + UARTDM_CSR);
|
|
writel(0x0, priv->base + UARTDM_MR1);
|
|
writel(MSM_BOOT_UART_DM_8_N_1_MODE, priv->base + UARTDM_MR2);
|
|
writel(MSM_BOOT_UART_DM_CMD_RESET_RX, priv->base + UARTDM_CR);
|
|
writel(MSM_BOOT_UART_DM_CMD_RESET_TX, priv->base + UARTDM_CR);
|
|
}
|
|
static int msm_serial_probe(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
struct msm_serial_data *priv = dev_get_priv(dev);
|
|
|
|
/* No need to reinitialize the UART after relocation */
|
|
if (gd->flags & GD_FLG_RELOC)
|
|
return 0;
|
|
|
|
ret = msm_uart_clk_init(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pinctrl_select_state(dev, "uart");
|
|
uart_dm_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msm_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct msm_serial_data *priv = dev_get_priv(dev);
|
|
|
|
priv->base = devfdt_get_addr(dev);
|
|
if (priv->base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id msm_serial_ids[] = {
|
|
{ .compatible = "qcom,msm-uartdm-v1.4" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_msm) = {
|
|
.name = "serial_msm",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = msm_serial_ids,
|
|
.ofdata_to_platdata = msm_serial_ofdata_to_platdata,
|
|
.priv_auto_alloc_size = sizeof(struct msm_serial_data),
|
|
.probe = msm_serial_probe,
|
|
.ops = &msm_serial_ops,
|
|
};
|