mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
695c4994ac
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
284 lines
6.5 KiB
C
284 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2010-2016, NVIDIA CORPORATION.
|
|
* (based on tegra_gpio.c)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/io.h>
|
|
#include <asm/bitops.h>
|
|
#include <asm/gpio.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "tegra186_gpio_priv.h"
|
|
|
|
struct tegra186_gpio_port_data {
|
|
const char *name;
|
|
uint32_t offset;
|
|
};
|
|
|
|
struct tegra186_gpio_ctlr_data {
|
|
const struct tegra186_gpio_port_data *ports;
|
|
uint32_t port_count;
|
|
};
|
|
|
|
struct tegra186_gpio_platdata {
|
|
const char *name;
|
|
uint32_t *regs;
|
|
};
|
|
|
|
static uint32_t *tegra186_gpio_reg(struct udevice *dev, uint32_t reg,
|
|
uint32_t gpio)
|
|
{
|
|
struct tegra186_gpio_platdata *plat = dev->platdata;
|
|
uint32_t index = (reg + (gpio * TEGRA186_GPIO_PER_GPIO_STRIDE)) / 4;
|
|
|
|
return &(plat->regs[index]);
|
|
}
|
|
|
|
static int tegra186_gpio_set_out(struct udevice *dev, unsigned offset,
|
|
bool output)
|
|
{
|
|
uint32_t *reg;
|
|
uint32_t rval;
|
|
|
|
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_CONTROL, offset);
|
|
rval = readl(reg);
|
|
if (output)
|
|
rval &= ~TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
|
|
else
|
|
rval |= TEGRA186_GPIO_OUTPUT_CONTROL_FLOATED;
|
|
writel(rval, reg);
|
|
|
|
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
|
|
rval = readl(reg);
|
|
if (output)
|
|
rval |= TEGRA186_GPIO_ENABLE_CONFIG_OUT;
|
|
else
|
|
rval &= ~TEGRA186_GPIO_ENABLE_CONFIG_OUT;
|
|
rval |= TEGRA186_GPIO_ENABLE_CONFIG_ENABLE;
|
|
writel(rval, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra186_gpio_set_val(struct udevice *dev, unsigned offset, bool val)
|
|
{
|
|
uint32_t *reg;
|
|
uint32_t rval;
|
|
|
|
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE, offset);
|
|
rval = readl(reg);
|
|
if (val)
|
|
rval |= TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
|
|
else
|
|
rval &= ~TEGRA186_GPIO_OUTPUT_VALUE_HIGH;
|
|
writel(rval, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra186_gpio_direction_input(struct udevice *dev, unsigned offset)
|
|
{
|
|
return tegra186_gpio_set_out(dev, offset, false);
|
|
}
|
|
|
|
static int tegra186_gpio_direction_output(struct udevice *dev, unsigned offset,
|
|
int value)
|
|
{
|
|
int ret;
|
|
|
|
ret = tegra186_gpio_set_val(dev, offset, value != 0);
|
|
if (ret)
|
|
return ret;
|
|
return tegra186_gpio_set_out(dev, offset, true);
|
|
}
|
|
|
|
static int tegra186_gpio_get_value(struct udevice *dev, unsigned offset)
|
|
{
|
|
uint32_t *reg;
|
|
uint32_t rval;
|
|
|
|
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
|
|
rval = readl(reg);
|
|
|
|
if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
|
|
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_OUTPUT_VALUE,
|
|
offset);
|
|
else
|
|
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_INPUT, offset);
|
|
|
|
rval = readl(reg);
|
|
return !!rval;
|
|
}
|
|
|
|
static int tegra186_gpio_set_value(struct udevice *dev, unsigned offset,
|
|
int value)
|
|
{
|
|
return tegra186_gpio_set_val(dev, offset, value != 0);
|
|
}
|
|
|
|
static int tegra186_gpio_get_function(struct udevice *dev, unsigned offset)
|
|
{
|
|
uint32_t *reg;
|
|
uint32_t rval;
|
|
|
|
reg = tegra186_gpio_reg(dev, TEGRA186_GPIO_ENABLE_CONFIG, offset);
|
|
rval = readl(reg);
|
|
if (rval & TEGRA186_GPIO_ENABLE_CONFIG_OUT)
|
|
return GPIOF_OUTPUT;
|
|
else
|
|
return GPIOF_INPUT;
|
|
}
|
|
|
|
static int tegra186_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
|
|
struct ofnode_phandle_args *args)
|
|
{
|
|
int gpio, port, ret;
|
|
|
|
gpio = args->args[0];
|
|
port = gpio / TEGRA186_GPIO_PER_GPIO_COUNT;
|
|
ret = device_get_child(dev, port, &desc->dev);
|
|
if (ret)
|
|
return ret;
|
|
desc->offset = gpio % TEGRA186_GPIO_PER_GPIO_COUNT;
|
|
desc->flags = args->args[1] & GPIO_ACTIVE_LOW ? GPIOD_ACTIVE_LOW : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_gpio_ops tegra186_gpio_ops = {
|
|
.direction_input = tegra186_gpio_direction_input,
|
|
.direction_output = tegra186_gpio_direction_output,
|
|
.get_value = tegra186_gpio_get_value,
|
|
.set_value = tegra186_gpio_set_value,
|
|
.get_function = tegra186_gpio_get_function,
|
|
.xlate = tegra186_gpio_xlate,
|
|
};
|
|
|
|
/**
|
|
* We have a top-level GPIO device with no actual GPIOs. It has a child device
|
|
* for each port within the controller.
|
|
*/
|
|
static int tegra186_gpio_bind(struct udevice *parent)
|
|
{
|
|
struct tegra186_gpio_platdata *parent_plat = parent->platdata;
|
|
struct tegra186_gpio_ctlr_data *ctlr_data =
|
|
(struct tegra186_gpio_ctlr_data *)dev_get_driver_data(parent);
|
|
uint32_t *regs;
|
|
int port, ret;
|
|
|
|
/* If this is a child device, there is nothing to do here */
|
|
if (parent_plat)
|
|
return 0;
|
|
|
|
regs = (uint32_t *)devfdt_get_addr_name(parent, "gpio");
|
|
if (regs == (uint32_t *)FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
for (port = 0; port < ctlr_data->port_count; port++) {
|
|
struct tegra186_gpio_platdata *plat;
|
|
struct udevice *dev;
|
|
|
|
plat = calloc(1, sizeof(*plat));
|
|
if (!plat)
|
|
return -ENOMEM;
|
|
plat->name = ctlr_data->ports[port].name;
|
|
plat->regs = &(regs[ctlr_data->ports[port].offset / 4]);
|
|
|
|
ret = device_bind(parent, parent->driver, plat->name, plat,
|
|
-1, &dev);
|
|
if (ret)
|
|
return ret;
|
|
dev_set_of_offset(dev, dev_of_offset(parent));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra186_gpio_probe(struct udevice *dev)
|
|
{
|
|
struct tegra186_gpio_platdata *plat = dev->platdata;
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
|
|
/* Only child devices have ports */
|
|
if (!plat)
|
|
return 0;
|
|
|
|
uc_priv->gpio_count = TEGRA186_GPIO_PER_GPIO_COUNT;
|
|
uc_priv->bank_name = plat->name;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct tegra186_gpio_port_data tegra186_gpio_main_ports[] = {
|
|
{"A", 0x2000},
|
|
{"B", 0x3000},
|
|
{"C", 0x3200},
|
|
{"D", 0x3400},
|
|
{"E", 0x2200},
|
|
{"F", 0x2400},
|
|
{"G", 0x4200},
|
|
{"H", 0x1000},
|
|
{"I", 0x0800},
|
|
{"J", 0x5000},
|
|
{"K", 0x5200},
|
|
{"L", 0x1200},
|
|
{"M", 0x5600},
|
|
{"N", 0x0000},
|
|
{"O", 0x0200},
|
|
{"P", 0x4000},
|
|
{"Q", 0x0400},
|
|
{"R", 0x0a00},
|
|
{"T", 0x0600},
|
|
{"X", 0x1400},
|
|
{"Y", 0x1600},
|
|
{"BB", 0x2600},
|
|
{"CC", 0x5400},
|
|
};
|
|
|
|
static const struct tegra186_gpio_ctlr_data tegra186_gpio_main_data = {
|
|
.ports = tegra186_gpio_main_ports,
|
|
.port_count = ARRAY_SIZE(tegra186_gpio_main_ports),
|
|
};
|
|
|
|
static const struct tegra186_gpio_port_data tegra186_gpio_aon_ports[] = {
|
|
{"S", 0x0200},
|
|
{"U", 0x0400},
|
|
{"V", 0x0800},
|
|
{"W", 0x0a00},
|
|
{"Z", 0x0e00},
|
|
{"AA", 0x0c00},
|
|
{"EE", 0x0600},
|
|
{"FF", 0x0000},
|
|
};
|
|
|
|
static const struct tegra186_gpio_ctlr_data tegra186_gpio_aon_data = {
|
|
.ports = tegra186_gpio_aon_ports,
|
|
.port_count = ARRAY_SIZE(tegra186_gpio_aon_ports),
|
|
};
|
|
|
|
static const struct udevice_id tegra186_gpio_ids[] = {
|
|
{
|
|
.compatible = "nvidia,tegra186-gpio",
|
|
.data = (ulong)&tegra186_gpio_main_data,
|
|
},
|
|
{
|
|
.compatible = "nvidia,tegra186-gpio-aon",
|
|
.data = (ulong)&tegra186_gpio_aon_data,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(tegra186_gpio) = {
|
|
.name = "tegra186_gpio",
|
|
.id = UCLASS_GPIO,
|
|
.of_match = tegra186_gpio_ids,
|
|
.bind = tegra186_gpio_bind,
|
|
.probe = tegra186_gpio_probe,
|
|
.ops = &tegra186_gpio_ops,
|
|
};
|