mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
10b4dc5208
Move dma_ops to a separate header file, following other uclass implementations. While doing so, this patch also improves dma_ops documentation. Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
580 lines
17 KiB
C
580 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Enhanced Direct Memory Access (EDMA3) Controller
|
|
*
|
|
* (C) Copyright 2014
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
*
|
|
* Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dma-uclass.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/ti-common/ti-edma3.h>
|
|
|
|
#define EDMA3_SL_BASE(slot) (0x4000 + ((slot) << 5))
|
|
#define EDMA3_SL_MAX_NUM 512
|
|
#define EDMA3_SLOPT_FIFO_WIDTH_MASK (0x7 << 8)
|
|
|
|
#define EDMA3_QCHMAP(ch) 0x0200 + ((ch) << 2)
|
|
#define EDMA3_CHMAP_PARSET_MASK 0x1ff
|
|
#define EDMA3_CHMAP_PARSET_SHIFT 0x5
|
|
#define EDMA3_CHMAP_TRIGWORD_SHIFT 0x2
|
|
|
|
#define EDMA3_QEMCR 0x314
|
|
#define EDMA3_IPR 0x1068
|
|
#define EDMA3_IPRH 0x106c
|
|
#define EDMA3_ICR 0x1070
|
|
#define EDMA3_ICRH 0x1074
|
|
#define EDMA3_QEECR 0x1088
|
|
#define EDMA3_QEESR 0x108c
|
|
#define EDMA3_QSECR 0x1094
|
|
|
|
#define EDMA_FILL_BUFFER_SIZE 512
|
|
|
|
struct ti_edma3_priv {
|
|
u32 base;
|
|
};
|
|
|
|
static u8 edma_fill_buffer[EDMA_FILL_BUFFER_SIZE] __aligned(ARCH_DMA_MINALIGN);
|
|
|
|
/**
|
|
* qedma3_start - start qdma on a channel
|
|
* @base: base address of edma
|
|
* @cfg: pinter to struct edma3_channel_config where you can set
|
|
* the slot number to associate with, the chnum, which corresponds
|
|
* your quick channel number 0-7, complete code - transfer complete code
|
|
* and trigger slot word - which has to correspond to the word number in
|
|
* edma3_slot_layout struct for generating event.
|
|
*
|
|
*/
|
|
void qedma3_start(u32 base, struct edma3_channel_config *cfg)
|
|
{
|
|
u32 qchmap;
|
|
|
|
/* Clear the pending int bit */
|
|
if (cfg->complete_code < 32)
|
|
__raw_writel(1 << cfg->complete_code, base + EDMA3_ICR);
|
|
else
|
|
__raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH);
|
|
|
|
/* Map parameter set and trigger word 7 to quick channel */
|
|
qchmap = ((EDMA3_CHMAP_PARSET_MASK & cfg->slot)
|
|
<< EDMA3_CHMAP_PARSET_SHIFT) |
|
|
(cfg->trigger_slot_word << EDMA3_CHMAP_TRIGWORD_SHIFT);
|
|
|
|
__raw_writel(qchmap, base + EDMA3_QCHMAP(cfg->chnum));
|
|
|
|
/* Clear missed event if set*/
|
|
__raw_writel(1 << cfg->chnum, base + EDMA3_QSECR);
|
|
__raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR);
|
|
|
|
/* Enable qdma channel event */
|
|
__raw_writel(1 << cfg->chnum, base + EDMA3_QEESR);
|
|
}
|
|
|
|
/**
|
|
* edma3_set_dest - set initial DMA destination address in parameter RAM slot
|
|
* @base: base address of edma
|
|
* @slot: parameter RAM slot being configured
|
|
* @dst: physical address of destination (memory, controller FIFO, etc)
|
|
* @addressMode: INCR, except in very rare cases
|
|
* @width: ignored unless @addressMode is FIFO, else specifies the
|
|
* width to use when addressing the fifo (e.g. W8BIT, W32BIT)
|
|
*
|
|
* Note that the destination address is modified during the DMA transfer
|
|
* according to edma3_set_dest_index().
|
|
*/
|
|
void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode,
|
|
enum edma3_fifo_width width)
|
|
{
|
|
u32 opt;
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
opt = __raw_readl(&rg->opt);
|
|
if (mode == FIFO)
|
|
opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) |
|
|
(EDMA3_SLOPT_DST_ADDR_CONST_MODE |
|
|
EDMA3_SLOPT_FIFO_WIDTH_SET(width));
|
|
else
|
|
opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE;
|
|
|
|
__raw_writel(opt, &rg->opt);
|
|
__raw_writel(dst, &rg->dst);
|
|
}
|
|
|
|
/**
|
|
* edma3_set_dest_index - configure DMA destination address indexing
|
|
* @base: base address of edma
|
|
* @slot: parameter RAM slot being configured
|
|
* @bidx: byte offset between destination arrays in a frame
|
|
* @cidx: byte offset between destination frames in a block
|
|
*
|
|
* Offsets are specified to support either contiguous or discontiguous
|
|
* memory transfers, or repeated access to a hardware register, as needed.
|
|
* When accessing hardware registers, both offsets are normally zero.
|
|
*/
|
|
void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx)
|
|
{
|
|
u32 src_dst_bidx;
|
|
u32 src_dst_cidx;
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
src_dst_bidx = __raw_readl(&rg->src_dst_bidx);
|
|
src_dst_cidx = __raw_readl(&rg->src_dst_cidx);
|
|
|
|
__raw_writel((src_dst_bidx & 0x0000ffff) | (bidx << 16),
|
|
&rg->src_dst_bidx);
|
|
__raw_writel((src_dst_cidx & 0x0000ffff) | (cidx << 16),
|
|
&rg->src_dst_cidx);
|
|
}
|
|
|
|
/**
|
|
* edma3_set_dest_addr - set destination address for slot only
|
|
*/
|
|
void edma3_set_dest_addr(u32 base, int slot, u32 dst)
|
|
{
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
__raw_writel(dst, &rg->dst);
|
|
}
|
|
|
|
/**
|
|
* edma3_set_src - set initial DMA source address in parameter RAM slot
|
|
* @base: base address of edma
|
|
* @slot: parameter RAM slot being configured
|
|
* @src_port: physical address of source (memory, controller FIFO, etc)
|
|
* @mode: INCR, except in very rare cases
|
|
* @width: ignored unless @addressMode is FIFO, else specifies the
|
|
* width to use when addressing the fifo (e.g. W8BIT, W32BIT)
|
|
*
|
|
* Note that the source address is modified during the DMA transfer
|
|
* according to edma3_set_src_index().
|
|
*/
|
|
void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode,
|
|
enum edma3_fifo_width width)
|
|
{
|
|
u32 opt;
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
opt = __raw_readl(&rg->opt);
|
|
if (mode == FIFO)
|
|
opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) |
|
|
(EDMA3_SLOPT_DST_ADDR_CONST_MODE |
|
|
EDMA3_SLOPT_FIFO_WIDTH_SET(width));
|
|
else
|
|
opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE;
|
|
|
|
__raw_writel(opt, &rg->opt);
|
|
__raw_writel(src, &rg->src);
|
|
}
|
|
|
|
/**
|
|
* edma3_set_src_index - configure DMA source address indexing
|
|
* @base: base address of edma
|
|
* @slot: parameter RAM slot being configured
|
|
* @bidx: byte offset between source arrays in a frame
|
|
* @cidx: byte offset between source frames in a block
|
|
*
|
|
* Offsets are specified to support either contiguous or discontiguous
|
|
* memory transfers, or repeated access to a hardware register, as needed.
|
|
* When accessing hardware registers, both offsets are normally zero.
|
|
*/
|
|
void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx)
|
|
{
|
|
u32 src_dst_bidx;
|
|
u32 src_dst_cidx;
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
src_dst_bidx = __raw_readl(&rg->src_dst_bidx);
|
|
src_dst_cidx = __raw_readl(&rg->src_dst_cidx);
|
|
|
|
__raw_writel((src_dst_bidx & 0xffff0000) | bidx,
|
|
&rg->src_dst_bidx);
|
|
__raw_writel((src_dst_cidx & 0xffff0000) | cidx,
|
|
&rg->src_dst_cidx);
|
|
}
|
|
|
|
/**
|
|
* edma3_set_src_addr - set source address for slot only
|
|
*/
|
|
void edma3_set_src_addr(u32 base, int slot, u32 src)
|
|
{
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
__raw_writel(src, &rg->src);
|
|
}
|
|
|
|
/**
|
|
* edma3_set_transfer_params - configure DMA transfer parameters
|
|
* @base: base address of edma
|
|
* @slot: parameter RAM slot being configured
|
|
* @acnt: how many bytes per array (at least one)
|
|
* @bcnt: how many arrays per frame (at least one)
|
|
* @ccnt: how many frames per block (at least one)
|
|
* @bcnt_rld: used only for A-Synchronized transfers; this specifies
|
|
* the value to reload into bcnt when it decrements to zero
|
|
* @sync_mode: ASYNC or ABSYNC
|
|
*
|
|
* See the EDMA3 documentation to understand how to configure and link
|
|
* transfers using the fields in PaRAM slots. If you are not doing it
|
|
* all at once with edma3_write_slot(), you will use this routine
|
|
* plus two calls each for source and destination, setting the initial
|
|
* address and saying how to index that address.
|
|
*
|
|
* An example of an A-Synchronized transfer is a serial link using a
|
|
* single word shift register. In that case, @acnt would be equal to
|
|
* that word size; the serial controller issues a DMA synchronization
|
|
* event to transfer each word, and memory access by the DMA transfer
|
|
* controller will be word-at-a-time.
|
|
*
|
|
* An example of an AB-Synchronized transfer is a device using a FIFO.
|
|
* In that case, @acnt equals the FIFO width and @bcnt equals its depth.
|
|
* The controller with the FIFO issues DMA synchronization events when
|
|
* the FIFO threshold is reached, and the DMA transfer controller will
|
|
* transfer one frame to (or from) the FIFO. It will probably use
|
|
* efficient burst modes to access memory.
|
|
*/
|
|
void edma3_set_transfer_params(u32 base, int slot, int acnt,
|
|
int bcnt, int ccnt, u16 bcnt_rld,
|
|
enum edma3_sync_dimension sync_mode)
|
|
{
|
|
u32 opt;
|
|
u32 link_bcntrld;
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
link_bcntrld = __raw_readl(&rg->link_bcntrld);
|
|
|
|
__raw_writel((bcnt_rld << 16) | (0x0000ffff & link_bcntrld),
|
|
&rg->link_bcntrld);
|
|
|
|
opt = __raw_readl(&rg->opt);
|
|
if (sync_mode == ASYNC)
|
|
__raw_writel(opt & ~EDMA3_SLOPT_AB_SYNC, &rg->opt);
|
|
else
|
|
__raw_writel(opt | EDMA3_SLOPT_AB_SYNC, &rg->opt);
|
|
|
|
/* Set the acount, bcount, ccount registers */
|
|
__raw_writel((bcnt << 16) | (acnt & 0xffff), &rg->a_b_cnt);
|
|
__raw_writel(0xffff & ccnt, &rg->ccnt);
|
|
}
|
|
|
|
/**
|
|
* edma3_write_slot - write parameter RAM data for slot
|
|
* @base: base address of edma
|
|
* @slot: number of parameter RAM slot being modified
|
|
* @param: data to be written into parameter RAM slot
|
|
*
|
|
* Use this to assign all parameters of a transfer at once. This
|
|
* allows more efficient setup of transfers than issuing multiple
|
|
* calls to set up those parameters in small pieces, and provides
|
|
* complete control over all transfer options.
|
|
*/
|
|
void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param)
|
|
{
|
|
int i;
|
|
u32 *p = (u32 *)param;
|
|
u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4)
|
|
__raw_writel(*p++, addr++);
|
|
}
|
|
|
|
/**
|
|
* edma3_read_slot - read parameter RAM data from slot
|
|
* @base: base address of edma
|
|
* @slot: number of parameter RAM slot being copied
|
|
* @param: where to store copy of parameter RAM data
|
|
*
|
|
* Use this to read data from a parameter RAM slot, perhaps to
|
|
* save them as a template for later reuse.
|
|
*/
|
|
void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param)
|
|
{
|
|
int i;
|
|
u32 *p = (u32 *)param;
|
|
u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4)
|
|
*p++ = __raw_readl(addr++);
|
|
}
|
|
|
|
void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg)
|
|
{
|
|
struct edma3_slot_layout *rg;
|
|
|
|
rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot));
|
|
|
|
__raw_writel(cfg->opt, &rg->opt);
|
|
__raw_writel(cfg->src, &rg->src);
|
|
__raw_writel((cfg->bcnt << 16) | (cfg->acnt & 0xffff), &rg->a_b_cnt);
|
|
__raw_writel(cfg->dst, &rg->dst);
|
|
__raw_writel((cfg->dst_bidx << 16) |
|
|
(cfg->src_bidx & 0xffff), &rg->src_dst_bidx);
|
|
__raw_writel((cfg->bcntrld << 16) |
|
|
(cfg->link & 0xffff), &rg->link_bcntrld);
|
|
__raw_writel((cfg->dst_cidx << 16) |
|
|
(cfg->src_cidx & 0xffff), &rg->src_dst_cidx);
|
|
__raw_writel(0xffff & cfg->ccnt, &rg->ccnt);
|
|
}
|
|
|
|
/**
|
|
* edma3_check_for_transfer - check if transfer coplete by checking
|
|
* interrupt pending bit. Clear interrupt pending bit if complete.
|
|
* @base: base address of edma
|
|
* @cfg: pinter to struct edma3_channel_config which was passed
|
|
* to qedma3_start when you started qdma channel
|
|
*
|
|
* Return 0 if complete, 1 if not.
|
|
*/
|
|
int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg)
|
|
{
|
|
u32 inum;
|
|
u32 ipr_base;
|
|
u32 icr_base;
|
|
|
|
if (cfg->complete_code < 32) {
|
|
ipr_base = base + EDMA3_IPR;
|
|
icr_base = base + EDMA3_ICR;
|
|
inum = 1 << cfg->complete_code;
|
|
} else {
|
|
ipr_base = base + EDMA3_IPRH;
|
|
icr_base = base + EDMA3_ICRH;
|
|
inum = 1 << (cfg->complete_code - 32);
|
|
}
|
|
|
|
/* check complete interrupt */
|
|
if (!(__raw_readl(ipr_base) & inum))
|
|
return 1;
|
|
|
|
/* clean up the pending int bit */
|
|
__raw_writel(inum, icr_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qedma3_stop - stops dma on the channel passed
|
|
* @base: base address of edma
|
|
* @cfg: pinter to struct edma3_channel_config which was passed
|
|
* to qedma3_start when you started qdma channel
|
|
*/
|
|
void qedma3_stop(u32 base, struct edma3_channel_config *cfg)
|
|
{
|
|
/* Disable qdma channel event */
|
|
__raw_writel(1 << cfg->chnum, base + EDMA3_QEECR);
|
|
|
|
/* clean up the interrupt indication */
|
|
if (cfg->complete_code < 32)
|
|
__raw_writel(1 << cfg->complete_code, base + EDMA3_ICR);
|
|
else
|
|
__raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH);
|
|
|
|
/* Clear missed event if set*/
|
|
__raw_writel(1 << cfg->chnum, base + EDMA3_QSECR);
|
|
__raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR);
|
|
|
|
/* Clear the channel map */
|
|
__raw_writel(0, base + EDMA3_QCHMAP(cfg->chnum));
|
|
}
|
|
|
|
void __edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
|
|
void *dst, void *src, size_t len, size_t s_len)
|
|
{
|
|
struct edma3_slot_config slot;
|
|
struct edma3_channel_config edma_channel;
|
|
int b_cnt_value = 1;
|
|
int rem_bytes = 0;
|
|
int a_cnt_value = len;
|
|
unsigned int addr = (unsigned int) (dst);
|
|
unsigned int max_acnt = 0x7FFFU;
|
|
|
|
if (len > s_len) {
|
|
b_cnt_value = (len / s_len);
|
|
rem_bytes = (len % s_len);
|
|
a_cnt_value = s_len;
|
|
} else if (len > max_acnt) {
|
|
b_cnt_value = (len / max_acnt);
|
|
rem_bytes = (len % max_acnt);
|
|
a_cnt_value = max_acnt;
|
|
}
|
|
|
|
slot.opt = 0;
|
|
slot.src = ((unsigned int) src);
|
|
slot.acnt = a_cnt_value;
|
|
slot.bcnt = b_cnt_value;
|
|
slot.ccnt = 1;
|
|
if (len == s_len)
|
|
slot.src_bidx = a_cnt_value;
|
|
else
|
|
slot.src_bidx = 0;
|
|
slot.dst_bidx = a_cnt_value;
|
|
slot.src_cidx = 0;
|
|
slot.dst_cidx = 0;
|
|
slot.link = EDMA3_PARSET_NULL_LINK;
|
|
slot.bcntrld = 0;
|
|
slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
|
|
EDMA3_SLOPT_COMP_CODE(0) |
|
|
EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
|
|
|
|
edma3_slot_configure(edma3_base_addr, edma_slot_num, &slot);
|
|
edma_channel.slot = edma_slot_num;
|
|
edma_channel.chnum = 0;
|
|
edma_channel.complete_code = 0;
|
|
/* set event trigger to dst update */
|
|
edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
|
|
|
|
qedma3_start(edma3_base_addr, &edma_channel);
|
|
edma3_set_dest_addr(edma3_base_addr, edma_channel.slot, addr);
|
|
|
|
while (edma3_check_for_transfer(edma3_base_addr, &edma_channel))
|
|
;
|
|
qedma3_stop(edma3_base_addr, &edma_channel);
|
|
|
|
if (rem_bytes != 0) {
|
|
slot.opt = 0;
|
|
if (len == s_len)
|
|
slot.src =
|
|
(b_cnt_value * max_acnt) + ((unsigned int) src);
|
|
else
|
|
slot.src = (unsigned int) src;
|
|
slot.acnt = rem_bytes;
|
|
slot.bcnt = 1;
|
|
slot.ccnt = 1;
|
|
slot.src_bidx = rem_bytes;
|
|
slot.dst_bidx = rem_bytes;
|
|
slot.src_cidx = 0;
|
|
slot.dst_cidx = 0;
|
|
slot.link = EDMA3_PARSET_NULL_LINK;
|
|
slot.bcntrld = 0;
|
|
slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
|
|
EDMA3_SLOPT_COMP_CODE(0) |
|
|
EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
|
|
edma3_slot_configure(edma3_base_addr, edma_slot_num, &slot);
|
|
edma_channel.slot = edma_slot_num;
|
|
edma_channel.chnum = 0;
|
|
edma_channel.complete_code = 0;
|
|
/* set event trigger to dst update */
|
|
edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
|
|
|
|
qedma3_start(edma3_base_addr, &edma_channel);
|
|
edma3_set_dest_addr(edma3_base_addr, edma_channel.slot, addr +
|
|
(max_acnt * b_cnt_value));
|
|
while (edma3_check_for_transfer(edma3_base_addr, &edma_channel))
|
|
;
|
|
qedma3_stop(edma3_base_addr, &edma_channel);
|
|
}
|
|
}
|
|
|
|
void __edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
|
|
void *dst, u8 val, size_t len)
|
|
{
|
|
int xfer_len;
|
|
int max_xfer = EDMA_FILL_BUFFER_SIZE * 65535;
|
|
|
|
memset((void *)edma_fill_buffer, val, sizeof(edma_fill_buffer));
|
|
|
|
while (len) {
|
|
xfer_len = len;
|
|
if (xfer_len > max_xfer)
|
|
xfer_len = max_xfer;
|
|
|
|
__edma3_transfer(edma3_base_addr, edma_slot_num, dst,
|
|
edma_fill_buffer, xfer_len,
|
|
EDMA_FILL_BUFFER_SIZE);
|
|
len -= xfer_len;
|
|
dst += xfer_len;
|
|
}
|
|
}
|
|
|
|
#ifndef CONFIG_DMA
|
|
|
|
void edma3_transfer(unsigned long edma3_base_addr, unsigned int edma_slot_num,
|
|
void *dst, void *src, size_t len)
|
|
{
|
|
__edma3_transfer(edma3_base_addr, edma_slot_num, dst, src, len, len);
|
|
}
|
|
|
|
void edma3_fill(unsigned long edma3_base_addr, unsigned int edma_slot_num,
|
|
void *dst, u8 val, size_t len)
|
|
{
|
|
__edma3_fill(edma3_base_addr, edma_slot_num, dst, val, len);
|
|
}
|
|
|
|
#else
|
|
|
|
static int ti_edma3_transfer(struct udevice *dev, int direction, void *dst,
|
|
void *src, size_t len)
|
|
{
|
|
struct ti_edma3_priv *priv = dev_get_priv(dev);
|
|
|
|
/* enable edma3 clocks */
|
|
enable_edma3_clocks();
|
|
|
|
switch (direction) {
|
|
case DMA_MEM_TO_MEM:
|
|
__edma3_transfer(priv->base, 1, dst, src, len, len);
|
|
break;
|
|
default:
|
|
pr_err("Transfer type not implemented in DMA driver\n");
|
|
break;
|
|
}
|
|
|
|
/* disable edma3 clocks */
|
|
disable_edma3_clocks();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_edma3_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct ti_edma3_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->base = devfdt_get_addr(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_edma3_probe(struct udevice *dev)
|
|
{
|
|
struct dma_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
|
|
uc_priv->supported = DMA_SUPPORTS_MEM_TO_MEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dma_ops ti_edma3_ops = {
|
|
.transfer = ti_edma3_transfer,
|
|
};
|
|
|
|
static const struct udevice_id ti_edma3_ids[] = {
|
|
{ .compatible = "ti,edma3" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(ti_edma3) = {
|
|
.name = "ti_edma3",
|
|
.id = UCLASS_DMA,
|
|
.of_match = ti_edma3_ids,
|
|
.ops = &ti_edma3_ops,
|
|
.ofdata_to_platdata = ti_edma3_ofdata_to_platdata,
|
|
.probe = ti_edma3_probe,
|
|
.priv_auto_alloc_size = sizeof(struct ti_edma3_priv),
|
|
};
|
|
#endif /* CONFIG_DMA */
|