mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 11:18:28 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
274 lines
6.7 KiB
C
274 lines
6.7 KiB
C
/*
|
|
* Copyright (c) 2012 The Chromium OS Authors.
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* This is a GPIO driver for Intel ICH6 and later. The x86 GPIOs are accessed
|
|
* through the PCI bus. Each PCI device has 256 bytes of configuration space,
|
|
* consisting of a standard header and a device-specific set of registers. PCI
|
|
* bus 0, device 31, function 0 gives us access to the chipset GPIOs (among
|
|
* other things). Within the PCI configuration space, the GPIOBASE register
|
|
* tells us where in the device's I/O region we can find more registers to
|
|
* actually access the GPIOs.
|
|
*
|
|
* PCI bus/device/function 0:1f:0 => PCI config registers
|
|
* PCI config register "GPIOBASE"
|
|
* PCI I/O space + [GPIOBASE] => start of GPIO registers
|
|
* GPIO registers => gpio pin function, direction, value
|
|
*
|
|
*
|
|
* Danger Will Robinson! Bank 0 (GPIOs 0-31) seems to be fairly stable. Most
|
|
* ICH versions have more, but the decoding the matrix that describes them is
|
|
* absurdly complex and constantly changing. We'll provide Bank 1 and Bank 2,
|
|
* but they will ONLY work for certain unspecified chipsets because the offset
|
|
* from GPIOBASE changes randomly. Even then, many GPIOs are unimplemented or
|
|
* reserved or subject to arcane restrictions.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
|
|
/* Where in config space is the register that points to the GPIO registers? */
|
|
#define PCI_CFG_GPIOBASE 0x48
|
|
|
|
#define NUM_BANKS 3
|
|
|
|
/* Within the I/O space, where are the registers to control the GPIOs? */
|
|
static struct {
|
|
u8 use_sel;
|
|
u8 io_sel;
|
|
u8 lvl;
|
|
} gpio_bank[NUM_BANKS] = {
|
|
{ 0x00, 0x04, 0x0c }, /* Bank 0 */
|
|
{ 0x30, 0x34, 0x38 }, /* Bank 1 */
|
|
{ 0x40, 0x44, 0x48 } /* Bank 2 */
|
|
};
|
|
|
|
static pci_dev_t dev; /* handle for 0:1f:0 */
|
|
static u32 gpiobase; /* offset into I/O space */
|
|
static int found_it_once; /* valid GPIO device? */
|
|
static u32 lock[NUM_BANKS]; /* "lock" for access to pins */
|
|
|
|
static int bad_arg(int num, int *bank, int *bitnum)
|
|
{
|
|
int i = num / 32;
|
|
int j = num % 32;
|
|
|
|
if (num < 0 || i > NUM_BANKS) {
|
|
debug("%s: bogus gpio num: %d\n", __func__, num);
|
|
return -1;
|
|
}
|
|
*bank = i;
|
|
*bitnum = j;
|
|
return 0;
|
|
}
|
|
|
|
static int mark_gpio(int bank, int bitnum)
|
|
{
|
|
if (lock[bank] & (1UL << bitnum)) {
|
|
debug("%s: %d.%d already marked\n", __func__, bank, bitnum);
|
|
return -1;
|
|
}
|
|
lock[bank] |= (1 << bitnum);
|
|
return 0;
|
|
}
|
|
|
|
static void clear_gpio(int bank, int bitnum)
|
|
{
|
|
lock[bank] &= ~(1 << bitnum);
|
|
}
|
|
|
|
static int notmine(int num, int *bank, int *bitnum)
|
|
{
|
|
if (bad_arg(num, bank, bitnum))
|
|
return -1;
|
|
return !(lock[*bank] & (1UL << *bitnum));
|
|
}
|
|
|
|
static int gpio_init(void)
|
|
{
|
|
u8 tmpbyte;
|
|
u16 tmpword;
|
|
u32 tmplong;
|
|
|
|
/* Have we already done this? */
|
|
if (found_it_once)
|
|
return 0;
|
|
|
|
/* Where should it be? */
|
|
dev = PCI_BDF(0, 0x1f, 0);
|
|
|
|
/* Is the device present? */
|
|
pci_read_config_word(dev, PCI_VENDOR_ID, &tmpword);
|
|
if (tmpword != PCI_VENDOR_ID_INTEL) {
|
|
debug("%s: wrong VendorID\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
pci_read_config_word(dev, PCI_DEVICE_ID, &tmpword);
|
|
debug("Found %04x:%04x\n", PCI_VENDOR_ID_INTEL, tmpword);
|
|
/*
|
|
* We'd like to validate the Device ID too, but pretty much any
|
|
* value is either a) correct with slight differences, or b)
|
|
* correct but undocumented. We'll have to check a bunch of other
|
|
* things instead...
|
|
*/
|
|
|
|
/* I/O should already be enabled (it's a RO bit). */
|
|
pci_read_config_word(dev, PCI_COMMAND, &tmpword);
|
|
if (!(tmpword & PCI_COMMAND_IO)) {
|
|
debug("%s: device IO not enabled\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* Header Type must be normal (bits 6-0 only; see spec.) */
|
|
pci_read_config_byte(dev, PCI_HEADER_TYPE, &tmpbyte);
|
|
if ((tmpbyte & 0x7f) != PCI_HEADER_TYPE_NORMAL) {
|
|
debug("%s: invalid Header type\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* Base Class must be a bridge device */
|
|
pci_read_config_byte(dev, PCI_CLASS_CODE, &tmpbyte);
|
|
if (tmpbyte != PCI_CLASS_CODE_BRIDGE) {
|
|
debug("%s: invalid class\n", __func__);
|
|
return -1;
|
|
}
|
|
/* Sub Class must be ISA */
|
|
pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &tmpbyte);
|
|
if (tmpbyte != PCI_CLASS_SUB_CODE_BRIDGE_ISA) {
|
|
debug("%s: invalid subclass\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* Programming Interface must be 0x00 (no others exist) */
|
|
pci_read_config_byte(dev, PCI_CLASS_PROG, &tmpbyte);
|
|
if (tmpbyte != 0x00) {
|
|
debug("%s: invalid interface type\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* GPIOBASE moved to its current offset with ICH6, but prior to
|
|
* that it was unused (or undocumented). Check that it looks
|
|
* okay: not all ones or zeros, and mapped to I/O space (bit 0).
|
|
*/
|
|
pci_read_config_dword(dev, PCI_CFG_GPIOBASE, &tmplong);
|
|
if (tmplong == 0x00000000 || tmplong == 0xffffffff ||
|
|
!(tmplong & 0x00000001)) {
|
|
debug("%s: unexpected GPIOBASE value\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Okay, I guess we're looking at the right device. The actual
|
|
* GPIO registers are in the PCI device's I/O space, starting
|
|
* at the offset that we just read. Bit 0 indicates that it's
|
|
* an I/O address, not a memory address, so mask that off.
|
|
*/
|
|
gpiobase = tmplong & 0xfffffffe;
|
|
|
|
/* Finally. These are the droids we're looking for. */
|
|
found_it_once = 1;
|
|
return 0;
|
|
}
|
|
|
|
int gpio_request(unsigned num, const char *label /* UNUSED */)
|
|
{
|
|
u32 tmplong;
|
|
int i = 0, j = 0;
|
|
|
|
/* Is the hardware ready? */
|
|
if (gpio_init())
|
|
return -1;
|
|
|
|
if (bad_arg(num, &i, &j))
|
|
return -1;
|
|
|
|
/*
|
|
* Make sure that the GPIO pin we want isn't already in use for some
|
|
* built-in hardware function. We have to check this for every
|
|
* requested pin.
|
|
*/
|
|
tmplong = inl(gpiobase + gpio_bank[i].use_sel);
|
|
if (!(tmplong & (1UL << j))) {
|
|
debug("%s: gpio %d is reserved for internal use\n", __func__,
|
|
num);
|
|
return -1;
|
|
}
|
|
|
|
return mark_gpio(i, j);
|
|
}
|
|
|
|
int gpio_free(unsigned num)
|
|
{
|
|
int i = 0, j = 0;
|
|
|
|
if (notmine(num, &i, &j))
|
|
return -1;
|
|
|
|
clear_gpio(i, j);
|
|
return 0;
|
|
}
|
|
|
|
int gpio_direction_input(unsigned num)
|
|
{
|
|
u32 tmplong;
|
|
int i = 0, j = 0;
|
|
|
|
if (notmine(num, &i, &j))
|
|
return -1;
|
|
|
|
tmplong = inl(gpiobase + gpio_bank[i].io_sel);
|
|
tmplong |= (1UL << j);
|
|
outl(gpiobase + gpio_bank[i].io_sel, tmplong);
|
|
return 0;
|
|
}
|
|
|
|
int gpio_direction_output(unsigned num, int value)
|
|
{
|
|
u32 tmplong;
|
|
int i = 0, j = 0;
|
|
|
|
if (notmine(num, &i, &j))
|
|
return -1;
|
|
|
|
tmplong = inl(gpiobase + gpio_bank[i].io_sel);
|
|
tmplong &= ~(1UL << j);
|
|
outl(gpiobase + gpio_bank[i].io_sel, tmplong);
|
|
return 0;
|
|
}
|
|
|
|
int gpio_get_value(unsigned num)
|
|
{
|
|
u32 tmplong;
|
|
int i = 0, j = 0;
|
|
int r;
|
|
|
|
if (notmine(num, &i, &j))
|
|
return -1;
|
|
|
|
tmplong = inl(gpiobase + gpio_bank[i].lvl);
|
|
r = (tmplong & (1UL << j)) ? 1 : 0;
|
|
return r;
|
|
}
|
|
|
|
int gpio_set_value(unsigned num, int value)
|
|
{
|
|
u32 tmplong;
|
|
int i = 0, j = 0;
|
|
|
|
if (notmine(num, &i, &j))
|
|
return -1;
|
|
|
|
tmplong = inl(gpiobase + gpio_bank[i].lvl);
|
|
if (value)
|
|
tmplong |= (1UL << j);
|
|
else
|
|
tmplong &= ~(1UL << j);
|
|
outl(gpiobase + gpio_bank[i].lvl, tmplong);
|
|
return 0;
|
|
}
|