mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
ffd4c7c2ec
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot dts files. This compatible has been added in sf_probe, let use it. This patch switches to jedec,spi-nor when spi-flash is used in the DTS and DTSI files, and removed spi-flash when jedec,spi-nor is already present. The x86 dts are switched in a separate commit since it depends on a change in fdtdec. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
156 lines
2.7 KiB
Text
156 lines
2.7 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ or X11
|
|
/*
|
|
* Device Tree file for CZ.NIC Turris Mox Board
|
|
* 2018 by Marek Behun <marek.behun@nic.cz>
|
|
*
|
|
* Based on armada-3720-espressobin.dts by:
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
* Konstantin Porotchkin <kostap@marvell.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-372x.dtsi"
|
|
|
|
/ {
|
|
model = "CZ.NIC Turris Mox Board";
|
|
compatible = "cznic,turris-mox", "marvell,armada3720",
|
|
"marvell,armada3710";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
aliases {
|
|
ethernet0 = ð0;
|
|
ethernet1 = ð1;
|
|
i2c0 = &i2c0;
|
|
spi0 = &spi0;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
|
|
};
|
|
|
|
reg_usb3_vbus: usb3_vbus@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb3-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
startup-delay-us = <2000000>;
|
|
shutdown-delay-us = <1000000>;
|
|
gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
eth_phy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&comphy {
|
|
max-lanes = <3>;
|
|
phy0 {
|
|
phy-type = <PHY_TYPE_SGMII1>;
|
|
phy-speed = <PHY_SPEED_3_125G>;
|
|
};
|
|
|
|
phy1 {
|
|
phy-type = <PHY_TYPE_PEX0>;
|
|
phy-speed = <PHY_SPEED_5G>;
|
|
};
|
|
|
|
phy2 {
|
|
phy-type = <PHY_TYPE_USB3_HOST0>;
|
|
phy-speed = <PHY_SPEED_5G>;
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
|
|
phy-mode = "rgmii";
|
|
phy = <ð_phy1>;
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
status = "okay";
|
|
|
|
rtc@6f {
|
|
compatible = "microchip,mcp7941x";
|
|
reg = <0x6f>;
|
|
};
|
|
};
|
|
|
|
&sdhci1 {
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl_nb {
|
|
spi_cs1_pins: spi-cs1-pins {
|
|
groups = "spi_cs1";
|
|
function = "spi";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_cs1_pins>;
|
|
assigned-clocks = <&nb_periph_clk 7>;
|
|
assigned-clock-parents = <&tbg 1>;
|
|
assigned-clock-rates = <20000000>;
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,s25fl064l", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <20000000>;
|
|
m25p,fast-read;
|
|
};
|
|
|
|
moxtet@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "cznic,moxtet";
|
|
reg = <1>;
|
|
reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
|
|
spi-max-frequency = <1000000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3 {
|
|
vbus-supply = <®_usb3_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pins>;
|
|
reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
|
|
status = "disabled";
|
|
};
|