u-boot/arch/arm/mach-rockchip/rk3036/rk3036.c
Kever Yang 7f3eec03d5 rockchip: rk3036: add board_debug_uart_init()
Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[Fixed whitespace error:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 09:40:58 +02:00

38 lines
942 B
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <asm/io.h>
#include <asm/arch-rockchip/grf_rk3036.h>
#include <asm/arch-rockchip/hardware.h>
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
#define GRF_BASE 0x20008000
struct rk3036_grf * const grf = (void *)GRF_BASE;
enum {
GPIO1C3_SHIFT = 6,
GPIO1C3_MASK = 3 << GPIO1C3_SHIFT,
GPIO1C3_GPIO = 0,
GPIO1C3_MMC0_D1,
GPIO1C3_UART2_SOUT,
GPIO1C2_SHIFT = 4,
GPIO1C2_MASK = 3 << GPIO1C2_SHIFT,
GPIO1C2_GPIO = 0,
GPIO1C2_MMC0_D0,
GPIO1C2_UART2_SIN,
};
/*
* NOTE: sd card and debug uart use same iomux in rk3036,
* so if you enable uart,
* you can not boot from sdcard
*/
rk_clrsetreg(&grf->gpio1c_iomux,
GPIO1C3_MASK << GPIO1C3_SHIFT |
GPIO1C2_MASK << GPIO1C2_SHIFT,
GPIO1C3_UART2_SOUT << GPIO1C3_SHIFT |
GPIO1C2_UART2_SIN << GPIO1C2_SHIFT);
}
#endif