mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 16:23:14 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
136 lines
3.9 KiB
C
136 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2011 Freescale Semiconductor
|
|
* Author: Shengzhou Liu <Shengzhou.Liu@freescale.com>
|
|
*
|
|
* This file provides support for the QIXIS of some Freescale reference boards.
|
|
*/
|
|
|
|
#ifndef __QIXIS_H_
|
|
#define __QIXIS_H_
|
|
|
|
struct qixis {
|
|
u8 id; /* ID value uniquely identifying each QDS board type */
|
|
u8 arch; /* Board version information */
|
|
u8 scver; /* QIXIS Version Register */
|
|
u8 model; /* Information of software programming model version */
|
|
u8 tagdata;
|
|
u8 ctl_sys;
|
|
u8 aux; /* Auxiliary Register,0x06 */
|
|
u8 clk_spd;
|
|
u8 stat_dut;
|
|
u8 stat_sys;
|
|
u8 stat_alrm;
|
|
u8 present;
|
|
u8 present2; /* Presence Status Register 2,0x0c */
|
|
u8 rcw_ctl;
|
|
u8 ctl_led;
|
|
u8 i2cblk;
|
|
u8 rcfg_ctl; /* Reconfig Control Register,0x10 */
|
|
u8 rcfg_st;
|
|
u8 dcm_ad;
|
|
u8 dcm_da;
|
|
u8 dcmd;
|
|
u8 dmsg;
|
|
u8 gdc;
|
|
u8 gdd; /* DCM Debug Data Register,0x17 */
|
|
u8 dmack;
|
|
u8 res1[6];
|
|
u8 watch; /* Watchdog Register,0x1F */
|
|
u8 pwr_ctl[2]; /* Power Control Register,0x20 */
|
|
u8 res2[2];
|
|
u8 pwr_stat[4]; /* Power Status Register,0x24 */
|
|
u8 res3[8];
|
|
u8 clk_spd2[2]; /* SYSCLK clock Speed Register,0x30 */
|
|
u8 res4[2];
|
|
u8 sclk[3]; /* Clock Configuration Registers,0x34 */
|
|
u8 res5;
|
|
u8 dclk[3];
|
|
u8 res6;
|
|
u8 clk_dspd[3];
|
|
u8 res7;
|
|
u8 rst_ctl; /* Reset Control Register,0x40 */
|
|
u8 rst_stat; /* Reset Status Register */
|
|
u8 rst_rsn; /* Reset Reason Register */
|
|
u8 rst_frc[2]; /* Reset Force Registers,0x43 */
|
|
u8 res8[11];
|
|
u8 brdcfg[16]; /* Board Configuration Register,0x50 */
|
|
u8 dutcfg[16];
|
|
u8 rcw_ad[2]; /* RCW SRAM Address Registers,0x70 */
|
|
u8 rcw_data;
|
|
u8 res9[5];
|
|
u8 post_ctl;
|
|
u8 post_stat;
|
|
u8 post_dat[2];
|
|
u8 pi_d[4];
|
|
u8 gpio_io[4];
|
|
u8 gpio_dir[4];
|
|
u8 res10[20];
|
|
u8 rjtag_ctl;
|
|
u8 rjtag_dat;
|
|
u8 res11[2];
|
|
u8 trig_src[4];
|
|
u8 trig_dst[4];
|
|
u8 trig_stat;
|
|
u8 res12[3];
|
|
u8 trig_ctr[4];
|
|
u8 res13[16];
|
|
u8 clk_freq[6]; /* Clock Measurement Registers */
|
|
u8 res_c6[8];
|
|
u8 clk_base[2]; /* Clock Frequency Base Reg */
|
|
u8 res_d0[8];
|
|
u8 cms[2]; /* Core Management Space Address Register, 0xD8 */
|
|
u8 res_c0[6];
|
|
u8 aux2[4]; /* Auxiliary Registers,0xE0 */
|
|
u8 res14[10];
|
|
u8 aux_ad;
|
|
u8 aux_da;
|
|
u8 res15[16];
|
|
};
|
|
|
|
u8 qixis_read(unsigned int reg);
|
|
void qixis_write(unsigned int reg, u8 value);
|
|
u16 qixis_read_minor(void);
|
|
char *qixis_read_time(char *result);
|
|
char *qixis_read_tag(char *buf);
|
|
const char *byte_to_binary_mask(u8 val, u8 mask, char *buf);
|
|
#ifdef CONFIG_SYS_I2C_FPGA_ADDR
|
|
u8 qixis_read_i2c(unsigned int reg);
|
|
void qixis_write_i2c(unsigned int reg, u8 value);
|
|
#endif
|
|
|
|
#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR)
|
|
#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg))
|
|
#define QIXIS_WRITE(reg, value) \
|
|
qixis_write_i2c(offsetof(struct qixis, reg), value)
|
|
#else
|
|
#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
|
|
#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_FPGA_ADDR
|
|
#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
|
|
#define QIXIS_WRITE_I2C(reg, value) \
|
|
qixis_write_i2c(offsetof(struct qixis, reg), value)
|
|
#endif
|
|
|
|
/* Use for SDHC adapter card type identification and operation */
|
|
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
|
|
#define QIXIS_SDID_MASK 0x07
|
|
#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC45 0x1 /* eMMC Card Rev4.5 */
|
|
#define QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY 0x2 /* SD/MMC Legacy Card */
|
|
#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC44 0x3 /* eMMC Card Rev4.4 */
|
|
#define QIXIS_ESDHC_ADAPTER_TYPE_RSV 0x4 /* Reserved */
|
|
#define QIXIS_ESDHC_ADAPTER_TYPE_MMC 0x5 /* MMC Card */
|
|
#define QIXIS_ESDHC_ADAPTER_TYPE_SD 0x6 /* SD Card Rev2.0 3.0 */
|
|
#define QIXIS_ESDHC_NO_ADAPTER 0x7 /* No Card is Present*/
|
|
|
|
#define QIXIS_SDCLKIN 0x08
|
|
#define QIXIS_SDCLKOUT 0x02
|
|
#define QIXIS_DAT5_6_7 0X02
|
|
#define QIXIS_DAT4 0X01
|
|
|
|
#define QIXIS_EVDD_BY_SDHC_VS 0x0c
|
|
#endif
|
|
|
|
#endif
|