mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 07:31:15 +00:00
35fe948e3b
The BSC9132 is a highly integrated device that targets the evolving
Microcell, Picocell, and Enterprise-Femto base station market subsegments.
The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
core technologies with MAPLE-B2P baseband acceleration processing elements
to address the need for a high performance, low cost, integrated solution
that handles all required processing layers without the need for an
external device except for an RF transceiver or, in a Micro base station
configuration, a host device that handles the L3/L4 and handover between
sectors.
The BSC9132 SoC includes the following function and features:
- Power Architecture subsystem including two e500 processors with
512-Kbyte shared L2 cache
- Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
cache
- 32 Kbyte of shared M3 memory
- The Multi Accelerator Platform Engine for Pico BaseStation Baseband
Processing (MAPLE-B2P)
- Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
ECC), up to 1333 MHz data rate
- Dedicated security engine featuring trusted boot
- Two DMA controllers
- OCNDMA with four bidirectional channels
- SysDMA with sixteen bidirectional channels
- Interfaces
- Four-lane SerDes PHY
- PCI Express controller complies with the PEX Specification-Rev 2.0
- Two Common Public Radio Interface (CPRI) controller lanes
- High-speed USB 2.0 host and device controller with ULPI interface
- Enhanced secure digital (SD/MMC) host controller (eSDHC)
- Antenna interface controller (AIC), supporting four industry
standard JESD207/four custom ADI RF interfaces
- ADI lanes support both full duplex FDD support & half duplex TDD
- Universal Subscriber Identity Module (USIM) interface that
facilitates communication to SIM cards or Eurochip pre-paid phone
cards
- Two DUART, two eSPI, and two I2C controllers
- Integrated Flash memory controller (IFC)
- GPIO
- Sixteen 32-bit timers
Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
96 lines
3.3 KiB
C
96 lines
3.3 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
* Author: Prabhakar Kushwaha <prabhakar@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_serdes.h>
|
|
|
|
#define SRDS1_MAX_LANES 4
|
|
|
|
static u32 serdes1_prtcl_map;
|
|
|
|
static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
|
|
[0] = {NONE, NONE, NONE, NONE},
|
|
[1] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[2] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[3] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[4] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[5] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
|
|
[12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[22] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[23] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[24] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[25] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[26] = {PCIE1, PCIE2, CPRI2, CPRI1},
|
|
[27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
|
|
[32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
|
|
[33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
|
|
[43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
[47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
|
|
};
|
|
|
|
int is_serdes_configured(enum srds_prtcl prtcl)
|
|
{
|
|
return (1 << prtcl) & serdes1_prtcl_map;
|
|
}
|
|
|
|
void fsl_serdes_init(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 pordevsr = in_be32(&gur->pordevsr);
|
|
u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
|
|
MPC85xx_PORDEVSR_IO_SEL_SHIFT;
|
|
int lane;
|
|
|
|
debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
|
|
|
|
if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
|
|
printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
|
|
return;
|
|
}
|
|
|
|
for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
|
|
enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
|
|
serdes1_prtcl_map |= (1 << lane_prtcl);
|
|
}
|
|
}
|