mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
229 lines
5.1 KiB
C
229 lines
5.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <console.h>
|
|
#include <watchdog.h>
|
|
|
|
/* USB Vendor Requests */
|
|
#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
|
|
#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
|
|
#define USB_VENDOR_REQUEST_GET_STATS 0xA2
|
|
|
|
/* Tx Command A */
|
|
#define TX_CMD_A_FCS BIT(22)
|
|
#define TX_CMD_A_LEN_MASK 0x000FFFFF
|
|
|
|
/* Rx Command A */
|
|
#define RX_CMD_A_RXE BIT(18)
|
|
#define RX_CMD_A_LEN_MASK 0x00003FFF
|
|
|
|
/* SCSRs */
|
|
#define ID_REV 0x00
|
|
#define ID_REV_CHIP_ID_MASK 0xFFFF0000
|
|
#define ID_REV_CHIP_ID_7500 0x7500
|
|
#define ID_REV_CHIP_ID_7800 0x7800
|
|
#define ID_REV_CHIP_ID_7850 0x7850
|
|
|
|
#define INT_STS 0x0C
|
|
|
|
#define HW_CFG 0x010
|
|
#define HW_CFG_LRST BIT(1)
|
|
|
|
#define PMT_CTL 0x014
|
|
#define PMT_CTL_PHY_PWRUP BIT(10)
|
|
#define PMT_CTL_READY BIT(7)
|
|
#define PMT_CTL_PHY_RST BIT(4)
|
|
|
|
#define E2P_CMD 0x040
|
|
#define E2P_CMD_EPC_BUSY BIT(31)
|
|
#define E2P_CMD_EPC_CMD_READ 0x00000000
|
|
#define E2P_CMD_EPC_TIMEOUT BIT(10)
|
|
#define E2P_CMD_EPC_ADDR_MASK 0x000001FF
|
|
|
|
#define E2P_DATA 0x044
|
|
|
|
#define RFE_CTL_BCAST_EN BIT(10)
|
|
#define RFE_CTL_DA_PERFECT BIT(1)
|
|
|
|
#define FCT_RX_CTL_EN BIT(31)
|
|
|
|
#define FCT_TX_CTL_EN BIT(31)
|
|
|
|
#define MAC_CR 0x100
|
|
#define MAC_CR_ADP BIT(13)
|
|
#define MAC_CR_AUTO_DUPLEX BIT(12)
|
|
#define MAC_CR_AUTO_SPEED BIT(11)
|
|
|
|
#define MAC_RX 0x104
|
|
#define MAC_RX_FCS_STRIP BIT(4)
|
|
#define MAC_RX_RXEN BIT(0)
|
|
|
|
#define MAC_TX 0x108
|
|
#define MAC_TX_TXEN BIT(0)
|
|
|
|
#define FLOW 0x10C
|
|
#define FLOW_CR_TX_FCEN BIT(30)
|
|
#define FLOW_CR_RX_FCEN BIT(29)
|
|
|
|
#define RX_ADDRH 0x118
|
|
#define RX_ADDRL 0x11C
|
|
|
|
#define MII_ACC 0x120
|
|
#define MII_ACC_MII_READ 0x00000000
|
|
#define MII_ACC_MII_WRITE 0x00000002
|
|
#define MII_ACC_MII_BUSY BIT(0)
|
|
|
|
#define MII_DATA 0x124
|
|
|
|
#define SS_USB_PKT_SIZE 1024
|
|
#define HS_USB_PKT_SIZE 512
|
|
#define FS_USB_PKT_SIZE 64
|
|
|
|
#define MAX_RX_FIFO_SIZE (12 * 1024)
|
|
#define MAX_TX_FIFO_SIZE (12 * 1024)
|
|
#define DEFAULT_BULK_IN_DELAY 0x0800
|
|
|
|
#define EEPROM_INDICATOR 0xA5
|
|
#define EEPROM_MAC_OFFSET 0x01
|
|
|
|
/* Some extra defines */
|
|
#define LAN7X_INTERNAL_PHY_ID 1
|
|
|
|
#define LAN7X_MAC_RX_MAX_SIZE(mtu) \
|
|
((mtu) << 16) /* Max frame size */
|
|
#define LAN7X_MAC_RX_MAX_SIZE_DEFAULT \
|
|
LAN7X_MAC_RX_MAX_SIZE(ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */)
|
|
|
|
/* Timeouts */
|
|
#define USB_CTRL_SET_TIMEOUT_MS 5000
|
|
#define USB_CTRL_GET_TIMEOUT_MS 5000
|
|
#define USB_BULK_SEND_TIMEOUT_MS 5000
|
|
#define USB_BULK_RECV_TIMEOUT_MS 5000
|
|
#define TIMEOUT_RESOLUTION_MS 50
|
|
#define PHY_CONNECT_TIMEOUT_MS 5000
|
|
|
|
#define RX_URB_SIZE 2048
|
|
|
|
/* driver private */
|
|
struct lan7x_private {
|
|
struct ueth_data ueth;
|
|
u32 chipid; /* Chip or device ID */
|
|
struct mii_dev *mdiobus;
|
|
struct phy_device *phydev;
|
|
};
|
|
|
|
/*
|
|
* Lan7x infrastructure commands
|
|
*/
|
|
|
|
int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data);
|
|
|
|
int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data);
|
|
|
|
static inline int lan7x_wait_for_bit(struct usb_device *udev,
|
|
const char *prefix, const u32 reg,
|
|
const u32 mask, const bool set,
|
|
const unsigned int timeout_ms,
|
|
const bool breakable)
|
|
{
|
|
u32 val;
|
|
unsigned long start = get_timer(0);
|
|
|
|
while (1) {
|
|
lan7x_read_reg(udev, reg, &val);
|
|
|
|
if (!set)
|
|
val = ~val;
|
|
|
|
if ((val & mask) == mask)
|
|
return 0;
|
|
|
|
if (get_timer(start) > timeout_ms)
|
|
break;
|
|
|
|
if (breakable && ctrlc()) {
|
|
puts("Abort\n");
|
|
return -EINTR;
|
|
}
|
|
|
|
udelay(1);
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
|
|
mask, set);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx);
|
|
|
|
void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx,
|
|
int regval);
|
|
|
|
static inline int lan7x_mdio_wait_for_bit(struct usb_device *udev,
|
|
const char *prefix,
|
|
int phy_id, const u32 reg,
|
|
const u32 mask, const bool set,
|
|
const unsigned int timeout_ms,
|
|
const bool breakable)
|
|
{
|
|
u32 val;
|
|
unsigned long start = get_timer(0);
|
|
|
|
while (1) {
|
|
val = lan7x_mdio_read(udev, phy_id, reg);
|
|
|
|
if (!set)
|
|
val = ~val;
|
|
|
|
if ((val & mask) == mask)
|
|
return 0;
|
|
|
|
if (get_timer(start) > timeout_ms)
|
|
break;
|
|
|
|
if (breakable && ctrlc()) {
|
|
puts("Abort\n");
|
|
return -EINTR;
|
|
}
|
|
|
|
udelay(1);
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
|
|
mask, set);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
int lan7x_phylib_register(struct udevice *udev);
|
|
|
|
int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev);
|
|
|
|
int lan7x_eth_phylib_config_start(struct udevice *udev);
|
|
|
|
int lan7x_pmt_phy_reset(struct usb_device *udev,
|
|
struct ueth_data *dev);
|
|
|
|
int lan7x_update_flowcontrol(struct usb_device *udev,
|
|
struct ueth_data *dev,
|
|
uint32_t *flow, uint32_t *fct_flow);
|
|
|
|
int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev);
|
|
|
|
int lan7x_basic_reset(struct usb_device *udev,
|
|
struct ueth_data *dev);
|
|
|
|
void lan7x_eth_stop(struct udevice *dev);
|
|
|
|
int lan7x_eth_send(struct udevice *dev, void *packet, int length);
|
|
|
|
int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp);
|
|
|
|
int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len);
|
|
|
|
int lan7x_eth_remove(struct udevice *dev);
|