mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| m547xevb.c | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Freescale MCF5475EVB ColdFire Development Board
================================================
TsiChung Liew(Tsi-Chung.Liew@freescale.com)
Created Jan 08, 2008
===========================================
Changed files:
==============
- board/freescale/m547xevb/m547xevb.c Dram setup, IDE pre init, and PCI init
- board/freescale/m547xevb/mii.c MII init
- board/freescale/m547xevb/Makefile Makefile
- board/freescale/m547xevb/config.mk config make
- board/freescale/m547xevb/u-boot.lds Linker description
- arch/m68k/cpu/mcf547x_8x/cpu.c cpu specific code
- arch/m68k/cpu/mcf547x_8x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
- arch/m68k/cpu/mcf547x_8x/interrupts.c cpu specific interrupt support
- arch/m68k/cpu/mcf547x_8x/slicetimer.c Timer support
- arch/m68k/cpu/mcf547x_8x/speed.c system, pci, flexbus, and cpu clock
- arch/m68k/cpu/mcf547x_8x/Makefile Makefile
- arch/m68k/cpu/mcf547x_8x/config.mk config make
- arch/m68k/cpu/mcf547x_8x/start.S start up assembly code
- doc/README.m5475evb This readme file
- drivers/dma/MCD_dmaApi.c DMA API functions
- drivers/dma/MCD_tasks.c DMA Tasks
- drivers/dma/MCD_tasksInit.c DMA Tasks Init
- drivers/net/fsl_mcdmafec.c ColdFire common DMA FEC driver
- drivers/serial/mcfuart.c ColdFire common UART driver
- include/MCD_dma.h DMA header file
- include/MCD_progCheck.h DMA header file
- include/MCD_tasksInit.h DMA header file
- include/asm-m68k/bitops.h Bit operation function export
- include/asm-m68k/byteorder.h Byte order functions
- include/asm-m68k/errno.h Error Number definition
- include/asm-m68k/fec.h FEC structure and definition
- include/asm-m68k/fsl_i2c.h I2C structure and definition
- include/asm-m68k/fsl_mcddmafec.h DMA FEC structure and definition
- include/asm-m68k/global_data.h Global data structure
- include/asm-m68k/immap.h ColdFire specific header file and driver macros
- include/asm-m68k/immap_547x_8x.h mcf547x_8x specific header file
- include/asm-m68k/io.h io functions
- include/asm-m68k/m547x_8x.h mcf547x_8x specific header file
- include/asm-m68k/posix_types.h Posix
- include/asm-m68k/processor.h header file
- include/asm-m68k/ptrace.h Exception structure
- include/asm-m68k/rtc.h Realtime clock header file
- include/asm-m68k/string.h String function export
- include/asm-m68k/timer.h Timer structure and definition
- include/asm-m68k/types.h Data types definition
- include/asm-m68k/uart.h Uart structure and definition
- include/asm-m68k/u-boot.h U-Boot structure
- include/configs/M5475EVB.h Board specific configuration file
- arch/m68k/lib/board.c board init function
- arch/m68k/lib/cache.c
- arch/m68k/lib/interrupts Coldfire common interrupt functions
- arch/m68k/lib/m68k_linux.c
- arch/m68k/lib/traps.c Exception init code
1 MCF547x specific Options/Settings
====================================
1.1 pre-loader is no longer suppoer in thie coldfire family
1.2 Configuration settings for M5475EVB Development Board
CONFIG_MCF547x_8x -- define for all MCF547x_8x CPUs
CONFIG_M547x -- define for all Freescale MCF547x CPUs
CONFIG_M5475 -- define for M5475EVB board
CONFIG_MCFUART -- define to use common CF Uart driver
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
CONFIG_BAUDRATE -- define UART baudrate
CONFIG_FSLDMAFEC -- define to use common dma FEC driver
CONFIG_MII -- enable to use MII driver
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
MCFFEC_TOUT_LOOP -- set FEC timeout loop
CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot
CONFIG_CMD_USB -- enable USB commands
CONFIG_USB_OHCI_NEW -- enable USB OHCI driver
CONFIG_USB_STORAGE -- enable USB Storage device
CONFIG_DOS_PARTITION -- enable DOS read/write
CONFIG_SLTTMR -- define to use SLT timer
CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
CONFIG_SYS_I2C_SPEED -- define for I2C speed
CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
CONFIG_SYS_IMMR -- define for MBAR offset
CONFIG_PCI -- define for PCI support
CONFIG_PCI_PNP -- define for Plug n play support
CONFIG_SKIPPCI_HOSTBRIDGE -- SKIP PCI Host bridge
CONFIG_SYS_PCI_MEM_BUS -- PCI memory logical offset
CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset
CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size
CONFIG_SYS_PCI_IO_BUS -- PCI IO logical offset
CONFIG_SYS_PCI_IO_PHYS -- PCI IO physical offset
CONFIG_SYS_PCI_IO_SIZE -- PCI IO size
CONFIG_SYS_PCI_CFG_BUS -- PCI Configuration logical offset
CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset
CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size
CONFIG_SYS_MBAR -- define MBAR offset
CONFIG_MONITOR_IS_IN_RAM -- Not support
CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF547x internal SRAM
CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================
2.1. System memory map:
Flash: 0xFF800000-0xFFFFFFFF (8MB)
DDR: 0x00000000-0x3FFFFFFF (1024MB)
SRAM: 0xF2000000-0xF2000FFF (4KB)
PCI: 0x70000000-0x8FFFFFFF (512MB)
IP: 0xF0000000-0xFFFFFFFF (256MB)
3. COMPILATION
==============
3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
version) from codesourcery.com was used. Download it from:
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
3.2 Compilation
export CROSS_COMPILE=cross-compile-prefix
cd u-boot-1.x.x
make distclean
make M5475AFE_config, or - boot 2MB, RAM 64MB
make M5475BFE_config, or - boot 2MB, code 16MB, RAM 64MB
make M5475CFE_config, or - boot 2MB, code 16MB, Video, USB, RAM 64MB
make M5475DFE_config, or - boot 2MB, USB, RAM 64MB
make M5475EFE_config, or - boot 2MB, Video, USB, RAM 64MB
make M5475FFE_config, or - boot 2MB, code 32MB, Video, USB, RAM 128MB
make M5475GFE_config, or - boot 2MB, RAM 64MB
make
5. SCREEN DUMP
==============
5.1
U-Boot 1.3.1 (Jan 8 2008 - 12:47:44)
CPU: Freescale MCF5475
CPU CLK 266 Mhz BUS CLK 133 Mhz
Board: Freescale FireEngine 5475 EVB
I2C: ready
DRAM: 64 MB
FLASH: 18 MB
In: serial
Out: serial
Err: serial
Net: FEC0, FEC1
-> pri
bootdelay=1
baudrate=115200
ethaddr=00:e0:0c:bc:e5:60
eth1addr=00:e0:0c:bc:e5:61
ipaddr=192.162.1.2
serverip=192.162.1.1
gatewayip=192.162.1.1
netmask=255.255.255.0
hostname=M547xEVB
netdev=eth0
loadaddr=10000
u-boot=u-boot.bin
load=tftp ${loadaddr) ${u-boot}
upd=run load; run prog
prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
stdin=serial
stdout=serial
stderr=serial
ethact=FEC0
mem=65024k
Environment size: 433/8188 bytes
-> bdin
memstart = 0x00000000
memsize = 0x04000000
flashstart = 0xFF800000
flashsize = 0x01200000
flashoffset = 0x00000000
sramstart = 0xF2000000
sramsize = 0x00001000
mbar = 0xF0000000
busfreq = 133.333 MHz
pcifreq = 0 MHz
ethaddr = 00:E0:0C:BC:E5:60
eth1addr = 00:E0:0C:BC:E5:61
ip_addr = 192.162.1.2
baudrate = 115200 bps
-> ?
? - alias for 'help'
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
bootvx - Boot vxWorks from an ELF image
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
dcache - enable or disable data cache
echo - echo args to console
erase - erase FLASH memory
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
i2c - I2C sub-system
icache - enable or disable instruction cache
iminfo - print header information for application image
imls - list all images found in flash
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mii - MII utility commands
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
pci - list and access PCI Configuration Space
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
source - run script from memory
tftpboot- boot image via network using TFTP protocol
usb - USB sub-system
usbboot - boot from USB device
version - print monitor version
-> usb start
(Re)start USB...
USB: OHCI pci controller (1131, 1561) found @(0:17:0)
OHCI regs address 0x80000000
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
->