mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
8c1a9c7de7
As CONFIG_ARCH_BCM6753 is replaced with CONFIG_BCM6855, update the driver Kconfig to use the new config symbol. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
415 lines
9.8 KiB
Text
415 lines
9.8 KiB
Text
menu "LED Support"
|
|
|
|
config LED
|
|
bool "Enable LED support"
|
|
depends on DM
|
|
help
|
|
Many boards have LEDs which can be used to signal status or alerts.
|
|
U-Boot provides a uclass API to implement this feature. LED drivers
|
|
can provide access to board-specific LEDs. Use of the device tree
|
|
for configuration is encouraged.
|
|
|
|
config LED_BCM6328
|
|
bool "LED Support for BCM6328"
|
|
depends on LED && ARCH_BMIPS
|
|
help
|
|
This option enables support for LEDs connected to the BCM6328
|
|
LED HW controller accessed via MMIO registers.
|
|
HW blinking is supported and up to 24 LEDs can be controlled.
|
|
All LEDs can blink at the same time but the delay is shared, which
|
|
means that if one LED is set to blink at 100ms and then a different
|
|
LED is set to blink at 200ms, both will blink at 200ms.
|
|
|
|
config LED_BCM6358
|
|
bool "LED Support for BCM6358"
|
|
depends on LED && ARCH_BMIPS
|
|
help
|
|
This option enables support for LEDs connected to the BCM6358
|
|
LED HW controller accessed via MMIO registers.
|
|
HW has no blinking capabilities and up to 32 LEDs can be controlled.
|
|
|
|
config LED_BCM6753
|
|
bool "LED Support for BCM6753"
|
|
depends on LED && BCM6855
|
|
help
|
|
This option enables support for LEDs connected to the BCM6753
|
|
HW has blinking and fading capabilities and up to 32 LEDs can be controlled.
|
|
|
|
config LED_BCM6858
|
|
bool "LED Support for BCM6858"
|
|
depends on LED && (BCM6856 || BCM6858 || BCM63158)
|
|
help
|
|
This option enables support for LEDs connected to the BCM6858
|
|
HW has blinking capabilities and up to 32 LEDs can be controlled.
|
|
|
|
config LED_CORTINA
|
|
bool "LED Support for Cortina Access CAxxxx SoCs"
|
|
depends on LED && (CORTINA_PLATFORM)
|
|
help
|
|
This option enables support for LEDs connected to the Cortina
|
|
Access CAxxxx SOCs.
|
|
|
|
config LED_PWM
|
|
bool "LED PWM"
|
|
depends on LED && DM_PWM
|
|
help
|
|
Enable support for LEDs connected to PWM.
|
|
Linux compatible ofdata.
|
|
|
|
config LED_BLINK
|
|
bool "Support LED blinking"
|
|
depends on LED
|
|
help
|
|
Some drivers can support automatic blinking of LEDs with a given
|
|
period, without needing timers or extra code to handle the timing.
|
|
This option enables support for this which adds slightly to the
|
|
code size.
|
|
|
|
config SPL_LED
|
|
bool "Enable LED support in SPL"
|
|
depends on SPL_DM
|
|
help
|
|
The LED subsystem adds a small amount of overhead to the image.
|
|
If this is acceptable and you have a need to use LEDs in SPL,
|
|
enable this option. You will need to enable device tree in SPL
|
|
for this to work.
|
|
|
|
config LED_GPIO
|
|
bool "LED support for GPIO-connected LEDs"
|
|
depends on LED && DM_GPIO
|
|
help
|
|
Enable support for LEDs which are connected to GPIO lines. These
|
|
GPIOs may be on the SoC or some other device which provides GPIOs.
|
|
The GPIO driver must used driver model. LEDs are configured using
|
|
the device tree.
|
|
|
|
config SPL_LED_GPIO
|
|
bool "LED support for GPIO-connected LEDs in SPL"
|
|
depends on SPL_LED && SPL_DM_GPIO
|
|
help
|
|
This option is an SPL-variant of the LED_GPIO option.
|
|
See the help of LED_GPIO for details.
|
|
|
|
config LED_STATUS
|
|
bool "Enable status LED API"
|
|
help
|
|
Allows common u-boot commands to use a board's leds to
|
|
provide status for activities like booting and downloading files.
|
|
|
|
if LED_STATUS
|
|
|
|
# Hidden constants
|
|
|
|
config LED_STATUS_OFF
|
|
int
|
|
default 0
|
|
|
|
config LED_STATUS_BLINKING
|
|
int
|
|
default 1
|
|
|
|
config LED_STATUS_ON
|
|
int
|
|
default 2
|
|
|
|
# Hidden constants end
|
|
|
|
config LED_STATUS_GPIO
|
|
bool "GPIO status LED implementation"
|
|
help
|
|
The status LED can be connected to a GPIO pin. In such cases, the
|
|
gpio_led driver can be used as a status LED backend implementation.
|
|
|
|
config LED_STATUS_BOARD_SPECIFIC
|
|
bool "Specific board"
|
|
default y
|
|
help
|
|
LED support is only for a specific board.
|
|
|
|
comment "LEDs parameters"
|
|
|
|
config LED_STATUS0
|
|
bool "Enable status LED 0"
|
|
|
|
if LED_STATUS0
|
|
|
|
config LED_STATUS_BIT
|
|
int "identification"
|
|
help
|
|
CONFIG_LED_STATUS_BIT is passed into the __led_* functions to identify
|
|
which LED is being acted on. As such, the chosen value must be unique
|
|
with respect to the other CONFIG_LED_STATUS_BIT's. Mapping the value
|
|
to a physical LED is the responsibility of the __led_* function.
|
|
|
|
config LED_STATUS_STATE
|
|
int "initial state"
|
|
range LED_STATUS_OFF LED_STATUS_ON
|
|
default LED_STATUS_OFF
|
|
help
|
|
Should be set one of the following:
|
|
0 - off
|
|
1 - blinking
|
|
2 - on
|
|
|
|
config LED_STATUS_FREQ
|
|
int "blink frequency"
|
|
range 2 10
|
|
default 2
|
|
help
|
|
The LED blink period calculated from LED_STATUS_FREQ:
|
|
LED_STATUS_PERIOD = CONFIG_SYS_HZ/LED_STATUS_FREQ
|
|
Values range: 2 - 10
|
|
|
|
endif # LED_STATUS0
|
|
|
|
config LED_STATUS1
|
|
bool "Enable status LED 1"
|
|
|
|
if LED_STATUS1
|
|
|
|
config LED_STATUS_BIT1
|
|
int "identification"
|
|
help
|
|
CONFIG_LED_STATUS_BIT1 is passed into the __led_* functions to
|
|
identify which LED is being acted on. As such, the chosen value must
|
|
be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
|
|
the value to a physical LED is the responsibility of the __led_*
|
|
function.
|
|
|
|
config LED_STATUS_STATE1
|
|
int "initial state"
|
|
range LED_STATUS_OFF LED_STATUS_ON
|
|
default LED_STATUS_OFF
|
|
help
|
|
Should be set one of the following:
|
|
0 - off
|
|
1 - blinking
|
|
2 - on
|
|
|
|
config LED_STATUS_FREQ1
|
|
int "blink frequency"
|
|
range 2 10
|
|
default 2
|
|
help
|
|
The LED blink period calculated from LED_STATUS_FREQ1:
|
|
LED_STATUS_PERIOD1 = CONFIG_SYS_HZ/LED_STATUS_FREQ1
|
|
Values range: 2 - 10
|
|
|
|
endif # LED_STATUS1
|
|
|
|
config LED_STATUS2
|
|
bool "Enable status LED 2"
|
|
|
|
if LED_STATUS2
|
|
|
|
config LED_STATUS_BIT2
|
|
int "identification"
|
|
help
|
|
CONFIG_LED_STATUS_BIT2 is passed into the __led_* functions to
|
|
identify which LED is being acted on. As such, the chosen value must
|
|
be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
|
|
the value to a physical LED is the responsibility of the __led_*
|
|
function.
|
|
|
|
config LED_STATUS_STATE2
|
|
int "initial state"
|
|
range LED_STATUS_OFF LED_STATUS_ON
|
|
default LED_STATUS_OFF
|
|
help
|
|
Should be set one of the following:
|
|
0 - off
|
|
1 - blinking
|
|
2 - on
|
|
|
|
config LED_STATUS_FREQ2
|
|
int "blink frequency"
|
|
range 2 10
|
|
default 2
|
|
help
|
|
The LED blink period calculated from LED_STATUS_FREQ2:
|
|
LED_STATUS_PERIOD2 = CONFIG_SYS_HZ/LED_STATUS_FREQ2
|
|
Values range: 2 - 10
|
|
|
|
endif # LED_STATUS2
|
|
|
|
config LED_STATUS3
|
|
bool "Enable status LED 3"
|
|
|
|
if LED_STATUS3
|
|
|
|
config LED_STATUS_BIT3
|
|
int "identification"
|
|
help
|
|
CONFIG_LED_STATUS_BIT3 is passed into the __led_* functions to
|
|
identify which LED is being acted on. As such, the chosen value must
|
|
be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
|
|
the value to a physical LED is the responsibility of the __led_*
|
|
function.
|
|
|
|
config LED_STATUS_STATE3
|
|
int "initial state"
|
|
range LED_STATUS_OFF LED_STATUS_ON
|
|
default LED_STATUS_OFF
|
|
help
|
|
Should be set one of the following:
|
|
0 - off
|
|
1 - blinking
|
|
2 - on
|
|
|
|
config LED_STATUS_FREQ3
|
|
int "blink frequency"
|
|
range 2 10
|
|
default 2
|
|
help
|
|
The LED blink period calculated from LED_STATUS_FREQ3:
|
|
LED_STATUS_PERIOD3 = CONFIG_SYS_HZ/LED_STATUS_FREQ3
|
|
Values range: 2 - 10
|
|
|
|
endif # LED_STATUS3
|
|
|
|
config LED_STATUS4
|
|
bool "Enable status LED 4"
|
|
|
|
if LED_STATUS4
|
|
|
|
config LED_STATUS_BIT4
|
|
int "identification"
|
|
help
|
|
CONFIG_LED_STATUS_BIT4 is passed into the __led_* functions to
|
|
identify which LED is being acted on. As such, the chosen value must
|
|
be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
|
|
the value to a physical LED is the responsibility of the __led_*
|
|
function.
|
|
|
|
config LED_STATUS_STATE4
|
|
int "initial state"
|
|
range LED_STATUS_OFF LED_STATUS_ON
|
|
default LED_STATUS_OFF
|
|
help
|
|
Should be set one of the following:
|
|
0 - off
|
|
1 - blinking
|
|
2 - on
|
|
|
|
config LED_STATUS_FREQ4
|
|
int "blink frequency"
|
|
range 2 10
|
|
default 2
|
|
help
|
|
The LED blink period calculated from LED_STATUS_FREQ4:
|
|
LED_STATUS_PERIOD4 = CONFIG_SYS_HZ/LED_STATUS_FREQ4
|
|
Values range: 2 - 10
|
|
|
|
endif # LED_STATUS4
|
|
|
|
config LED_STATUS5
|
|
bool "Enable status LED 5"
|
|
|
|
if LED_STATUS5
|
|
|
|
config LED_STATUS_BIT5
|
|
int "identification"
|
|
help
|
|
CONFIG_LED_STATUS_BIT5 is passed into the __led_* functions to
|
|
identify which LED is being acted on. As such, the chosen value must
|
|
be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
|
|
the value to a physical LED is the responsibility of the __led_*
|
|
function.
|
|
|
|
config LED_STATUS_STATE5
|
|
int "initial state"
|
|
range LED_STATUS_OFF LED_STATUS_ON
|
|
default LED_STATUS_OFF
|
|
help
|
|
Should be set one of the following:
|
|
0 - off
|
|
1 - blinking
|
|
2 - on
|
|
|
|
config LED_STATUS_FREQ5
|
|
int "blink frequency"
|
|
range 2 10
|
|
default 2
|
|
help
|
|
The LED blink period calculated from LED_STATUS_FREQ5:
|
|
LED_STATUS_PERIOD5 = CONFIG_SYS_HZ/LED_STATUS_FREQ5
|
|
Values range: 2 - 10
|
|
|
|
endif # LED_STATUS5
|
|
|
|
config LED_STATUS_BOOT_ENABLE
|
|
bool "Enable BOOT LED"
|
|
help
|
|
Enable to turn an LED on when the board is booting.
|
|
|
|
if LED_STATUS_BOOT_ENABLE
|
|
|
|
config LED_STATUS_BOOT
|
|
int "LED to light when the board is booting"
|
|
help
|
|
Valid enabled LED device number.
|
|
|
|
endif # LED_STATUS_BOOT_ENABLE
|
|
|
|
config LED_STATUS_RED_ENABLE
|
|
bool "Enable red LED"
|
|
help
|
|
Enable red status LED.
|
|
|
|
if LED_STATUS_RED_ENABLE
|
|
|
|
config LED_STATUS_RED
|
|
int "Red LED identification"
|
|
help
|
|
Valid enabled LED device number.
|
|
|
|
endif # LED_STATUS_RED_ENABLE
|
|
|
|
config LED_STATUS_YELLOW_ENABLE
|
|
bool "Enable yellow LED"
|
|
help
|
|
Enable yellow status LED.
|
|
|
|
if LED_STATUS_YELLOW_ENABLE
|
|
|
|
config LED_STATUS_YELLOW
|
|
int "Yellow LED identification"
|
|
help
|
|
Valid enabled LED device number.
|
|
|
|
endif # LED_STATUS_YELLOW_ENABLE
|
|
|
|
config LED_STATUS_BLUE_ENABLE
|
|
bool "Enable blue LED"
|
|
help
|
|
Enable blue status LED.
|
|
|
|
if LED_STATUS_BLUE_ENABLE
|
|
|
|
config LED_STATUS_BLUE
|
|
int "Blue LED identification"
|
|
help
|
|
Valid enabled LED device number.
|
|
|
|
endif # LED_STATUS_BLUE_ENABLE
|
|
|
|
config LED_STATUS_GREEN_ENABLE
|
|
bool "Enable green LED"
|
|
help
|
|
Enable green status LED.
|
|
|
|
if LED_STATUS_GREEN_ENABLE
|
|
|
|
config LED_STATUS_GREEN
|
|
int "Green LED identification"
|
|
help
|
|
Valid enabled LED device number (0-5).
|
|
|
|
endif # LED_STATUS_GREEN_ENABLE
|
|
|
|
config LED_STATUS_CMD
|
|
bool "Enable status LED commands"
|
|
|
|
endif # LED_STATUS
|
|
|
|
endmenu
|