u-boot/arch/arm/dts/stm32f469-disco-u-boot.dtsi
Patrice Chotard 7ccaa31380 MAINTAINERS: Update STi and STM32 maintainers emails in remaining files
A previous series already update STMicroelectronics emails maintainers
but some files have been omitted (Makefile, .dts, .dtsi and .rst files).
Update Patrick and my email address with the one dedicated to upstream
activities.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-13 09:52:58 +01:00

261 lines
5.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
* Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
*/
#include <dt-bindings/memory/stm32-sdram.h>
/{
clocks {
u-boot,dm-pre-reloc;
};
aliases {
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
spi0 = &qspi;
};
soc {
u-boot,dm-pre-reloc;
pin-controller {
u-boot,dm-pre-reloc;
};
fmc: fmc@A0000000 {
compatible = "st,stm32-fmc";
reg = <0xA0000000 0x1000>;
clocks = <&rcc 0 STM32F4_AHB3_CLOCK(FMC)>;
st,syscfg = <&syscfg>;
pinctrl-0 = <&fmc_pins_d32>;
pinctrl-names = "default";
st,mem_remap = <4>;
u-boot,dm-pre-reloc;
/*
* Memory configuration from sdram
* MICRON MT48LC4M32B2B5-6A
*/
bank0: bank@0 {
st,sdram-control = /bits/ 8 <NO_COL_8
NO_ROW_12
MWIDTH_32
BANKS_4
CAS_3
SDCLK_2
RD_BURST_EN
RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_2
TXSR_6
TRAS_4
TRC_6
TWR_2
TRP_2
TRCD_2>;
st,sdram-refcount = < 1292 >;
};
};
qspi: spi@A0001000 {
compatible = "st,stm32f469-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <91>;
spi-max-frequency = <108000000>;
clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
pinctrl-0 = <&qspi_pins>;
};
};
};
&clk_hse {
u-boot,dm-pre-reloc;
};
&clk_i2s_ckin {
u-boot,dm-pre-reloc;
};
&clk_lse {
u-boot,dm-pre-reloc;
};
&gpioa {
u-boot,dm-pre-reloc;
};
&gpiob {
u-boot,dm-pre-reloc;
};
&gpioc {
u-boot,dm-pre-reloc;
};
&gpiod {
u-boot,dm-pre-reloc;
};
&gpioe {
u-boot,dm-pre-reloc;
};
&gpiof {
u-boot,dm-pre-reloc;
};
&gpiog {
u-boot,dm-pre-reloc;
};
&gpioh {
u-boot,dm-pre-reloc;
};
&gpioi {
u-boot,dm-pre-reloc;
};
&gpioj {
u-boot,dm-pre-reloc;
};
&gpiok {
u-boot,dm-pre-reloc;
};
&pinctrl {
fmc_pins_d32: fmc_d32@0 {
u-boot,dm-pre-reloc;
pins
{
pinmux = <STM32_PINMUX('I',10, AF12)>, /* D31 */
<STM32_PINMUX('I', 9, AF12)>, /* D30 */
<STM32_PINMUX('I', 7, AF12)>, /* D29 */
<STM32_PINMUX('I', 6, AF12)>, /* D28 */
<STM32_PINMUX('I', 3, AF12)>, /* D27 */
<STM32_PINMUX('I', 2, AF12)>, /* D26 */
<STM32_PINMUX('I', 1, AF12)>, /* D25 */
<STM32_PINMUX('I', 0, AF12)>, /* D24 */
<STM32_PINMUX('H',15, AF12)>, /* D23 */
<STM32_PINMUX('H',14, AF12)>, /* D22 */
<STM32_PINMUX('H',13, AF12)>, /* D21 */
<STM32_PINMUX('H',12, AF12)>, /* D20 */
<STM32_PINMUX('H',11, AF12)>, /* D19 */
<STM32_PINMUX('H',10, AF12)>, /* D18 */
<STM32_PINMUX('H', 9, AF12)>, /* D17 */
<STM32_PINMUX('H', 8, AF12)>, /* D16 */
<STM32_PINMUX('D',10, AF12)>, /* D15 */
<STM32_PINMUX('D', 9, AF12)>, /* D14 */
<STM32_PINMUX('D', 8, AF12)>, /* D13 */
<STM32_PINMUX('E',15, AF12)>, /* D12 */
<STM32_PINMUX('E',14, AF12)>, /* D11 */
<STM32_PINMUX('E',13, AF12)>, /* D10 */
<STM32_PINMUX('E',12, AF12)>, /* D09 */
<STM32_PINMUX('E',11, AF12)>, /* D08 */
<STM32_PINMUX('E',10, AF12)>, /* D07 */
<STM32_PINMUX('E', 9, AF12)>, /* D06 */
<STM32_PINMUX('E', 8, AF12)>, /* D05 */
<STM32_PINMUX('E', 7, AF12)>, /* D04 */
<STM32_PINMUX('D', 1, AF12)>, /* D03 */
<STM32_PINMUX('D', 0, AF12)>, /* D02 */
<STM32_PINMUX('D',15, AF12)>, /* D01 */
<STM32_PINMUX('D',14, AF12)>, /* D00 */
<STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
<STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
<STM32_PINMUX('I', 4, AF12)>, /* NBL2 */
<STM32_PINMUX('I', 5, AF12)>, /* NBL3 */
<STM32_PINMUX('G', 5, AF12)>, /* BA1 */
<STM32_PINMUX('G', 4, AF12)>, /* BA0 */
<STM32_PINMUX('G', 1, AF12)>, /* A11 */
<STM32_PINMUX('G', 0, AF12)>, /* A10 */
<STM32_PINMUX('F',15, AF12)>, /* A09 */
<STM32_PINMUX('F',14, AF12)>, /* A08 */
<STM32_PINMUX('F',13, AF12)>, /* A07 */
<STM32_PINMUX('F',12, AF12)>, /* A06 */
<STM32_PINMUX('F', 5, AF12)>, /* A05 */
<STM32_PINMUX('F', 4, AF12)>, /* A04 */
<STM32_PINMUX('F', 3, AF12)>, /* A03 */
<STM32_PINMUX('F', 2, AF12)>, /* A02 */
<STM32_PINMUX('F', 1, AF12)>, /* A01 */
<STM32_PINMUX('F', 0, AF12)>, /* A00 */
<STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
<STM32_PINMUX('C', 0, AF12)>, /* SDNWE */
<STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
<STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
<STM32_PINMUX('H', 2, AF12)>, /* SDCKE0 */
<STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
slew-rate = <2>;
u-boot,dm-pre-reloc;
};
};
qspi_pins: qspi@0 {
pins {
pinmux = <STM32_PINMUX('F',10, AF9)>, /* CLK */
<STM32_PINMUX('B', 6, AF10)>, /* BK1_NCS */
<STM32_PINMUX('F', 8, AF10)>, /* BK1_IO0 */
<STM32_PINMUX('F', 9, AF10)>, /* BK1_IO1 */
<STM32_PINMUX('F', 7, AF9)>, /* BK1_IO2 */
<STM32_PINMUX('F', 6, AF9)>; /* BK1_IO3 */
slew-rate = <2>;
};
};
usart3_pins_a: usart3-0 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
};
pins2 {
u-boot,dm-pre-reloc;
};
};
};
&pwrcfg {
u-boot,dm-pre-reloc;
};
&qspi {
reg = <0xA0001000 0x1000>, <0x90000000 0x1000000>;
flash0: n25q128a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <108000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
reg = <0>;
};
};
&rcc {
u-boot,dm-pre-reloc;
};
&syscfg {
u-boot,dm-pre-reloc;
};
&timer5 {
u-boot,dm-pre-reloc;
};