mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
281 lines
6.2 KiB
C
281 lines
6.2 KiB
C
/*
|
|
* rs5c372.c
|
|
*
|
|
* Device driver for Ricoh's Real Time Controller RS5C372A.
|
|
*
|
|
* Copyright (C) 2004 Gary Jennejohn garyj@denx.de
|
|
*
|
|
* Based in part in ds1307.c -
|
|
* (C) Copyright 2001, 2002, 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* Keith Outwater, keith_outwater@mvis.com`
|
|
* Steven Scholz, steven.scholz@imc-berlin.de
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <rtc.h>
|
|
#include <i2c.h>
|
|
|
|
#if defined(CONFIG_CMD_DATE)
|
|
/*
|
|
* Reads are always done starting with register 15, which requires some
|
|
* jumping-through-hoops to access the data correctly.
|
|
*
|
|
* Writes are always done starting with register 0.
|
|
*/
|
|
|
|
#define DEBUG 0
|
|
|
|
#if DEBUG
|
|
static unsigned int rtc_debug = DEBUG;
|
|
#else
|
|
#define rtc_debug 0 /* gcc will remove all the debug code for us */
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_I2C_RTC_ADDR
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x32
|
|
#endif
|
|
|
|
#define RS5C372_RAM_SIZE 0x10
|
|
#define RATE_32000HZ 0x80 /* Rate Select 32.000KHz */
|
|
#define RATE_32768HZ 0x00 /* Rate Select 32.768KHz */
|
|
|
|
#define STATUS_XPT 0x10 /* data invalid because voltage was 0 */
|
|
|
|
#define USE_24HOUR_MODE 0x20
|
|
#define TWELVE_HOUR_MODE(n) ((((n) >> 5) & 1) == 0)
|
|
#define HOURS_AP(n) (((n) >> 5) & 1)
|
|
#define HOURS_12(n) bcd2bin((n) & 0x1F)
|
|
#define HOURS_24(n) bcd2bin((n) & 0x3F)
|
|
|
|
|
|
static int setup_done = 0;
|
|
|
|
static int
|
|
rs5c372_readram(unsigned char *buf, int len)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, len);
|
|
if (ret != 0) {
|
|
printf("%s: failed to read\n", __FUNCTION__);
|
|
return ret;
|
|
}
|
|
|
|
if (buf[0] & STATUS_XPT)
|
|
printf("### Warning: RTC lost power\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
rs5c372_enable(void)
|
|
{
|
|
unsigned char buf[RS5C372_RAM_SIZE + 1];
|
|
int ret;
|
|
|
|
/* note that this returns reg. 15 in buf[1] */
|
|
ret = rs5c372_readram(&buf[1], RS5C372_RAM_SIZE);
|
|
if (ret != 0) {
|
|
printf("%s: failed\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
buf[0] = 0;
|
|
/* we want to start writing at register 0 so we have to copy the */
|
|
/* register contents up one slot */
|
|
for (ret = 2; ret < 9; ret++)
|
|
buf[ret - 1] = buf[ret];
|
|
/* registers 0 to 6 (time values) are not touched */
|
|
buf[8] = RATE_32768HZ; /* reg. 7 */
|
|
buf[9] = 0; /* reg. 8 */
|
|
buf[10] = 0; /* reg. 9 */
|
|
buf[11] = 0; /* reg. 10 */
|
|
buf[12] = 0; /* reg. 11 */
|
|
buf[13] = 0; /* reg. 12 */
|
|
buf[14] = 0; /* reg. 13 */
|
|
buf[15] = 0; /* reg. 14 */
|
|
buf[16] = USE_24HOUR_MODE; /* reg. 15 */
|
|
ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
|
|
if (ret != 0) {
|
|
printf("%s: failed\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
setup_done = 1;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
rs5c372_convert_to_time(struct rtc_time *dt, unsigned char *buf)
|
|
{
|
|
/* buf[0] is register 15 */
|
|
dt->tm_sec = bcd2bin(buf[1]);
|
|
dt->tm_min = bcd2bin(buf[2]);
|
|
|
|
if (TWELVE_HOUR_MODE(buf[0])) {
|
|
dt->tm_hour = HOURS_12(buf[3]);
|
|
if (HOURS_AP(buf[3])) /* PM */
|
|
dt->tm_hour += 12;
|
|
} else /* 24-hour-mode */
|
|
dt->tm_hour = HOURS_24(buf[3]);
|
|
|
|
dt->tm_mday = bcd2bin(buf[5]);
|
|
dt->tm_mon = bcd2bin(buf[6]);
|
|
dt->tm_year = bcd2bin(buf[7]);
|
|
if (dt->tm_year >= 70)
|
|
dt->tm_year += 1900;
|
|
else
|
|
dt->tm_year += 2000;
|
|
/* 0 is Sunday */
|
|
dt->tm_wday = bcd2bin(buf[4] & 0x07);
|
|
dt->tm_yday = 0;
|
|
dt->tm_isdst= 0;
|
|
|
|
if(rtc_debug > 2) {
|
|
printf("rs5c372_convert_to_time: year = %d\n", dt->tm_year);
|
|
printf("rs5c372_convert_to_time: mon = %d\n", dt->tm_mon);
|
|
printf("rs5c372_convert_to_time: mday = %d\n", dt->tm_mday);
|
|
printf("rs5c372_convert_to_time: hour = %d\n", dt->tm_hour);
|
|
printf("rs5c372_convert_to_time: min = %d\n", dt->tm_min);
|
|
printf("rs5c372_convert_to_time: sec = %d\n", dt->tm_sec);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Get the current time from the RTC
|
|
*/
|
|
int
|
|
rtc_get (struct rtc_time *tmp)
|
|
{
|
|
unsigned char buf[RS5C372_RAM_SIZE];
|
|
int ret;
|
|
|
|
if (!setup_done)
|
|
rs5c372_enable();
|
|
|
|
if (!setup_done)
|
|
return -1;
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
/* note that this returns reg. 15 in buf[0] */
|
|
ret = rs5c372_readram(buf, RS5C372_RAM_SIZE);
|
|
if (ret != 0) {
|
|
printf("%s: failed\n", __FUNCTION__);
|
|
return -1;
|
|
}
|
|
|
|
rs5c372_convert_to_time(tmp, buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the RTC
|
|
*/
|
|
int rtc_set (struct rtc_time *tmp)
|
|
{
|
|
unsigned char buf[8], reg15;
|
|
int ret;
|
|
|
|
if (!setup_done)
|
|
rs5c372_enable();
|
|
|
|
if (!setup_done)
|
|
return -1;
|
|
|
|
if(rtc_debug > 2) {
|
|
printf("rtc_set: tm_year = %d\n", tmp->tm_year);
|
|
printf("rtc_set: tm_mon = %d\n", tmp->tm_mon);
|
|
printf("rtc_set: tm_mday = %d\n", tmp->tm_mday);
|
|
printf("rtc_set: tm_hour = %d\n", tmp->tm_hour);
|
|
printf("rtc_set: tm_min = %d\n", tmp->tm_min);
|
|
printf("rtc_set: tm_sec = %d\n", tmp->tm_sec);
|
|
}
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
/* only read register 15 */
|
|
ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1);
|
|
|
|
if (ret == 0) {
|
|
/* need to save register 15 */
|
|
reg15 = buf[0];
|
|
buf[0] = 0; /* register address on RS5C372 */
|
|
buf[1] = bin2bcd(tmp->tm_sec);
|
|
buf[2] = bin2bcd(tmp->tm_min);
|
|
/* need to handle 12 hour mode */
|
|
if (TWELVE_HOUR_MODE(reg15)) {
|
|
if (tmp->tm_hour >= 12) { /* PM */
|
|
/* 12 PM is a special case */
|
|
if (tmp->tm_hour == 12)
|
|
buf[3] = bin2bcd(tmp->tm_hour);
|
|
else
|
|
buf[3] = bin2bcd(tmp->tm_hour - 12);
|
|
buf[3] |= 0x20;
|
|
}
|
|
} else {
|
|
buf[3] = bin2bcd(tmp->tm_hour);
|
|
}
|
|
|
|
buf[4] = bin2bcd(tmp->tm_wday);
|
|
buf[5] = bin2bcd(tmp->tm_mday);
|
|
buf[6] = bin2bcd(tmp->tm_mon);
|
|
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
|
|
printf("WARNING: year should be between 1970 and 2069!\n");
|
|
buf[7] = bin2bcd(tmp->tm_year % 100);
|
|
|
|
ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 8);
|
|
if (ret != 0) {
|
|
printf("rs5c372_set_datetime(), i2c_master_send() returned %d\n",ret);
|
|
return -1;
|
|
}
|
|
} else {
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset the RTC. We set the date back to 1970-01-01.
|
|
*/
|
|
void
|
|
rtc_reset (void)
|
|
{
|
|
struct rtc_time tmp;
|
|
|
|
if (!setup_done)
|
|
rs5c372_enable();
|
|
|
|
if (!setup_done)
|
|
return;
|
|
|
|
tmp.tm_year = 1970;
|
|
tmp.tm_mon = 1;
|
|
/* Jan. 1, 1970 was a Thursday */
|
|
tmp.tm_wday= 4;
|
|
tmp.tm_mday= 1;
|
|
tmp.tm_hour = 0;
|
|
tmp.tm_min = 0;
|
|
tmp.tm_sec = 0;
|
|
|
|
rtc_set(&tmp);
|
|
|
|
printf ("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
|
|
tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
|
|
tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
|
|
|
|
return;
|
|
}
|
|
|
|
#endif
|