mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 17:10:11 +00:00
2b58e1b76d
The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit6e7e9294d3("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit68f7c5db2d("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
158 lines
4.6 KiB
Text
158 lines
4.6 KiB
Text
#
|
|
# USB Host Controller Drivers
|
|
#
|
|
comment "USB Host Controller Drivers"
|
|
|
|
config USB_HOST
|
|
bool
|
|
|
|
config USB_XHCI_HCD
|
|
bool "xHCI HCD (USB 3.0) support"
|
|
select USB_HOST
|
|
---help---
|
|
The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
|
|
"SuperSpeed" host controller hardware.
|
|
|
|
if USB_XHCI_HCD
|
|
|
|
config USB_XHCI_UNIPHIER
|
|
bool "Support for UniPhier on-chip xHCI USB controller"
|
|
depends on ARCH_UNIPHIER
|
|
default y
|
|
---help---
|
|
Enables support for the on-chip xHCI controller on UniPhier SoCs.
|
|
|
|
config USB_XHCI_DWC3
|
|
bool "DesignWare USB3 DRD Core Support"
|
|
help
|
|
Say Y or if your system has a Dual Role SuperSpeed
|
|
USB controller based on the DesignWare USB3 IP Core.
|
|
|
|
endif # USB_XHCI_HCD
|
|
|
|
config USB_EHCI_HCD
|
|
bool "EHCI HCD (USB 2.0) support"
|
|
select USB_HOST
|
|
---help---
|
|
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
|
|
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
|
|
If your USB host controller supports USB 2.0, you will likely want to
|
|
configure this Host Controller Driver.
|
|
|
|
EHCI controllers are packaged with "companion" host controllers (OHCI
|
|
or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
|
|
will connect to EHCI if the device is high speed, otherwise they
|
|
connect to a companion controller. If you configure EHCI, you should
|
|
probably configure the OHCI (for NEC and some other vendors) USB Host
|
|
Controller Driver or UHCI (for Via motherboards) Host Controller
|
|
Driver too.
|
|
|
|
You may want to read <file:Documentation/usb/ehci.txt>.
|
|
|
|
config USB_EHCI
|
|
bool
|
|
default USB_EHCI_HCD
|
|
---help---
|
|
TODO: rename after most boards switch to Kconfig
|
|
|
|
if USB_EHCI_HCD
|
|
|
|
config USB_EHCI_MARVELL
|
|
bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller"
|
|
depends on ARCH_MVEBU
|
|
default y
|
|
---help---
|
|
Enables support for the on-chip EHCI controller on MVEBU SoCs.
|
|
|
|
config USB_EHCI_MX6
|
|
bool "Support for i.MX6 on-chip EHCI USB controller"
|
|
depends on ARCH_MX6
|
|
default y
|
|
---help---
|
|
Enables support for the on-chip EHCI controller on i.MX6 SoCs.
|
|
|
|
config USB_EHCI_MX7
|
|
bool "Support for i.MX7 on-chip EHCI USB controller"
|
|
depends on ARCH_MX7
|
|
default y
|
|
---help---
|
|
Enables support for the on-chip EHCI controller on i.MX7 SoCs.
|
|
|
|
if USB_EHCI_MX7
|
|
|
|
config MXC_USB_OTG_HACTIVE
|
|
bool "USB Power pin high active"
|
|
---help---
|
|
Set the USB Power pin polarity to be high active (PWR_POL)
|
|
|
|
endif
|
|
|
|
config USB_EHCI_MSM
|
|
bool "Support for Qualcomm on-chip EHCI USB controller"
|
|
depends on DM_USB
|
|
select USB_ULPI_VIEWPORT
|
|
default n
|
|
---help---
|
|
Enables support for the on-chip EHCI controller on Qualcomm
|
|
Snapdragon SoCs.
|
|
This driver supports combination of Chipidea USB controller
|
|
and Synapsys USB PHY in host mode only.
|
|
|
|
config USB_EHCI_ZYNQ
|
|
bool "Support for Xilinx Zynq on-chip EHCI USB controller"
|
|
depends on ARCH_ZYNQ
|
|
default y
|
|
---help---
|
|
Enable support for Zynq on-chip EHCI USB controller
|
|
|
|
config USB_EHCI_GENERIC
|
|
bool "Support for generic EHCI USB controller"
|
|
depends on OF_CONTROL
|
|
depends on DM_USB
|
|
default n
|
|
---help---
|
|
Enables support for generic EHCI controller.
|
|
|
|
endif # USB_EHCI_HCD
|
|
|
|
config USB_OHCI_HCD
|
|
bool "OHCI HCD (USB 1.1) support"
|
|
---help---
|
|
The Open Host Controller Interface (OHCI) is a standard for accessing
|
|
USB 1.1 host controller hardware. It does more in hardware than Intel's
|
|
UHCI specification. If your USB host controller follows the OHCI spec,
|
|
say Y. On most non-x86 systems, and on x86 hardware that's not using a
|
|
USB controller from Intel or VIA, this is appropriate. If your host
|
|
controller doesn't use PCI, this is probably appropriate. For a PCI
|
|
based system where you're not sure, the "lspci -v" entry will list the
|
|
right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
|
|
|
|
if USB_OHCI_HCD
|
|
|
|
config USB_OHCI_GENERIC
|
|
bool "Support for generic OHCI USB controller"
|
|
depends on OF_CONTROL
|
|
depends on DM_USB
|
|
select USB_HOST
|
|
---help---
|
|
Enables support for generic OHCI controller.
|
|
|
|
endif # USB_OHCI_HCD
|
|
|
|
config USB_UHCI_HCD
|
|
bool "UHCI HCD (most Intel and VIA) support"
|
|
select USB_HOST
|
|
---help---
|
|
The Universal Host Controller Interface is a standard by Intel for
|
|
accessing the USB hardware in the PC (which is also called the USB
|
|
host controller). If your USB host controller conforms to this
|
|
standard, you may want to say Y, but see below. All recent boards
|
|
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
|
|
i810, i820) conform to this standard. Also all VIA PCI chipsets
|
|
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
|
|
133) and LEON/GRLIB SoCs with the GRUSBHC controller.
|
|
If unsure, say Y.
|
|
|
|
if USB_UHCI_HCD
|
|
|
|
endif # USB_UHCI_HCD
|