mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 03:53:31 +00:00
cf376808f1
Provide a man-page for the saves command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
88 lines
2.4 KiB
ReStructuredText
88 lines
2.4 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+:
|
|
|
|
saves command
|
|
=============
|
|
|
|
Synopsis
|
|
--------
|
|
|
|
::
|
|
|
|
saves [offset [size [baud]]]
|
|
|
|
Description
|
|
-----------
|
|
|
|
The *saves* command is used to transfer a file from the device via the serial
|
|
line using the Motorola S-record file format.
|
|
|
|
offset
|
|
start address of memory area to save, defaults to 0x0
|
|
|
|
size
|
|
size of memory area to save, defaults to 0x0
|
|
|
|
baud
|
|
baud rate to use for upload. This parameter is only available if
|
|
CONFIG_SYS_LOADS_BAUD_CHANGE=y
|
|
|
|
Example
|
|
-------
|
|
|
|
In the example the *screen* command is used to connect to the U-Boot serial
|
|
console.
|
|
|
|
In a first screen session a file is loaded from the SD-card and the *saves*
|
|
command is invoked. <CTRL+A><k> is used to kill the screen session.
|
|
|
|
A new screen session is started which logs the output to a file and the
|
|
<ENTER> key is hit to start the file output. <CTRL+A><k> is issued to kill the
|
|
screen session.
|
|
|
|
The log file is converted to a binary file using the *srec_cat* command.
|
|
A negative offset of -1337982976 (= -0x4c000000) is applied to compensate for
|
|
the offset used in the *saves* command.
|
|
|
|
.. code-block::
|
|
|
|
$ screen /dev/ttyUSB0 115200
|
|
=> echo $scriptaddr
|
|
0x4FC00000
|
|
=> load mmc 0:1 $scriptaddr boot.txt
|
|
124 bytes read in 1 ms (121.1 KiB/s)
|
|
=> saves $scriptaddr $filesize
|
|
## Ready for S-Record upload, press ENTER to proceed ...
|
|
Really kill this window [y/n]
|
|
$ screen -Logfile out.srec -L /dev/ttyUSB0 115200
|
|
S0030000FC
|
|
S3154FC00000736574656E76206175746F6C6F616420AD
|
|
S3154FC000106E6F0A646863700A6C6F6164206D6D633E
|
|
S3154FC0002020303A3120246664745F616464725F72B3
|
|
S3154FC00030206474620A6C6F6164206D6D6320303AC0
|
|
S3154FC000403120246B65726E656C5F616464725F72DA
|
|
S3154FC0005020736E702E6566690A626F6F74656669C6
|
|
S3154FC0006020246B65726E656C5F616464725F7220CB
|
|
S3114FC00070246664745F616464725F720A38
|
|
S70500000000FA
|
|
## S-Record upload complete
|
|
=>
|
|
Really kill this window [y/n]
|
|
$ srec_cat out.srec -offset -1337982976 -Output out.txt -binary 2>/dev/null
|
|
$ cat out.txt
|
|
setenv autoload no
|
|
dhcp
|
|
load mmc 0:1 $fdt_addr_r dtb
|
|
load mmc 0:1 $kernel_addr_r snp.efi
|
|
bootefi $kernel_addr_r $fdt_addr_r
|
|
$
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
The command is only available if CONFIG_CMD_SAVES=y. The parameter to set the
|
|
baud rate is only available if CONFIG_SYS_LOADS_BAUD_CHANGE=y
|
|
|
|
Return value
|
|
------------
|
|
|
|
The return value $? is 0 (true) on success, 1 (false) otherwise.
|