mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 03:53:31 +00:00
bb34410509
Perform simple renames of: CONFIG_WATCHDOG_PRESC to CFG_WATCHDOG_PRESC CONFIG_WATCHDOG_RC to CFG_WATCHDOG_RC Signed-off-by: Tom Rini <trini@konsulko.com>
705 lines
17 KiB
C
705 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2004,2007-2011 Freescale Semiconductor, Inc.
|
|
* (C) Copyright 2002, 2003 Motorola Inc.
|
|
* Xianghua Xiao (X.Xiao@motorola.com)
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <clock_legacy.h>
|
|
#include <display_options.h>
|
|
#include <init.h>
|
|
#include <irq_func.h>
|
|
#include <log.h>
|
|
#include <time.h>
|
|
#include <vsprintf.h>
|
|
#include <watchdog.h>
|
|
#include <command.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mmu.h>
|
|
#include <fsl_ifc.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_lbc.h>
|
|
#include <post.h>
|
|
#include <asm/processor.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/ppc.h>
|
|
#include <linux/delay.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Default board reset function
|
|
*/
|
|
static void
|
|
__board_reset(void)
|
|
{
|
|
/* Do nothing */
|
|
}
|
|
void board_reset_prepare(void) __attribute__((weak, alias("__board_reset")));
|
|
void board_reset(void) __attribute__((weak, alias("__board_reset")));
|
|
void board_reset_last(void) __attribute__((weak, alias("__board_reset")));
|
|
|
|
int checkcpu (void)
|
|
{
|
|
sys_info_t sysinfo;
|
|
uint pvr, svr;
|
|
uint ver;
|
|
uint major, minor;
|
|
struct cpu_type *cpu;
|
|
char buf1[32], buf2[32];
|
|
#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || \
|
|
defined(CONFIG_STATIC_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
|
|
ccsr_gur_t __iomem *gur =
|
|
(void __iomem *)(CFG_SYS_MPC85xx_GUTS_ADDR);
|
|
#endif
|
|
|
|
/*
|
|
* Cornet platforms use ddr sync bit in RCW to indicate sync vs async
|
|
* mode. Previous platform use ddr ratio to do the same. This
|
|
* information is only for display here.
|
|
*/
|
|
#ifdef CONFIG_FSL_CORENET
|
|
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
|
|
u32 ddr_sync = 0; /* only async mode is supported */
|
|
#else
|
|
u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
|
|
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
|
|
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
|
|
#else /* CONFIG_FSL_CORENET */
|
|
#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
|
|
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
|
|
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
|
|
#else
|
|
u32 ddr_ratio = 0;
|
|
#endif /* CONFIG_DYNAMIC_DDR_CLK_FREQ || CONFIG_STATIC_DDR_CLK_FREQ */
|
|
#endif /* CONFIG_FSL_CORENET */
|
|
|
|
unsigned int i, core, nr_cores = cpu_numcores();
|
|
u32 mask = cpu_mask();
|
|
|
|
#ifdef CONFIG_HETROGENOUS_CLUSTERS
|
|
unsigned int j, dsp_core, dsp_numcores = cpu_num_dspcores();
|
|
u32 dsp_mask = cpu_dsp_mask();
|
|
#endif
|
|
|
|
svr = get_svr();
|
|
major = SVR_MAJ(svr);
|
|
minor = SVR_MIN(svr);
|
|
|
|
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
|
|
if (SVR_SOC_VER(svr) == SVR_T4080) {
|
|
ccsr_rcpm_t *rcpm =
|
|
(void __iomem *)(CFG_SYS_FSL_CORENET_RCPM_ADDR);
|
|
|
|
setbits_be32(&gur->devdisr2, FSL_CORENET_DEVDISR2_DTSEC1_6 ||
|
|
FSL_CORENET_DEVDISR2_DTSEC1_9);
|
|
setbits_be32(&gur->devdisr3, FSL_CORENET_DEVDISR3_PCIE3);
|
|
setbits_be32(&gur->devdisr5, FSL_CORENET_DEVDISR5_DDR3);
|
|
|
|
/* It needs SW to disable core4~7 as HW design sake on T4080 */
|
|
for (i = 4; i < 8; i++)
|
|
cpu_disable(i);
|
|
|
|
/* request core4~7 into PH20 state, prior to entering PCL10
|
|
* state, all cores in cluster should be placed in PH20 state.
|
|
*/
|
|
setbits_be32(&rcpm->pcph20setr, 0xf0);
|
|
|
|
/* put the 2nd cluster into PCL10 state */
|
|
setbits_be32(&rcpm->clpcl10setr, 1 << 1);
|
|
}
|
|
#endif
|
|
|
|
if (cpu_numcores() > 1) {
|
|
#ifndef CONFIG_MP
|
|
puts("Unicore software on multiprocessor system!!\n"
|
|
"To enable mutlticore build define CONFIG_MP\n");
|
|
#endif
|
|
volatile ccsr_pic_t *pic = (void *)(CFG_SYS_MPC8xxx_PIC_ADDR);
|
|
printf("CPU%d: ", pic->whoami);
|
|
} else {
|
|
puts("CPU: ");
|
|
}
|
|
|
|
cpu = gd->arch.cpu;
|
|
|
|
puts(cpu->name);
|
|
if (IS_E_PROCESSOR(svr))
|
|
puts("E");
|
|
|
|
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
|
|
|
|
pvr = get_pvr();
|
|
ver = PVR_VER(pvr);
|
|
major = PVR_MAJ(pvr);
|
|
minor = PVR_MIN(pvr);
|
|
|
|
printf("Core: ");
|
|
switch(ver) {
|
|
case PVR_VER_E500_V1:
|
|
puts("e500v1");
|
|
break;
|
|
case PVR_VER_E500_V2:
|
|
puts("e500v2");
|
|
break;
|
|
case PVR_VER_E500MC:
|
|
puts("e500mc");
|
|
break;
|
|
case PVR_VER_E5500:
|
|
puts("e5500");
|
|
break;
|
|
case PVR_VER_E6500:
|
|
puts("e6500");
|
|
break;
|
|
default:
|
|
puts("Unknown");
|
|
break;
|
|
}
|
|
|
|
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
|
|
|
|
if (nr_cores > CONFIG_MAX_CPUS) {
|
|
panic("\nUnexpected number of cores: %d, max is %d\n",
|
|
nr_cores, CONFIG_MAX_CPUS);
|
|
}
|
|
|
|
get_sys_info(&sysinfo);
|
|
|
|
#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
|
|
if (sysinfo.diff_sysclk == 1)
|
|
puts("Single Source Clock Configuration\n");
|
|
#endif
|
|
|
|
puts("Clock Configuration:");
|
|
for_each_cpu(i, core, nr_cores, mask) {
|
|
if (!(i & 3))
|
|
printf ("\n ");
|
|
printf("CPU%d:%-4s MHz, ", core,
|
|
strmhz(buf1, sysinfo.freq_processor[core]));
|
|
}
|
|
|
|
#ifdef CONFIG_HETROGENOUS_CLUSTERS
|
|
for_each_cpu(j, dsp_core, dsp_numcores, dsp_mask) {
|
|
if (!(j & 3))
|
|
printf("\n ");
|
|
printf("DSP CPU%d:%-4s MHz, ", j,
|
|
strmhz(buf1, sysinfo.freq_processor_dsp[dsp_core]));
|
|
}
|
|
#endif
|
|
|
|
printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
|
|
printf("\n");
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
if (ddr_sync == 1) {
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
"(Synchronous), ",
|
|
strmhz(buf1, sysinfo.freq_ddrbus/2),
|
|
strmhz(buf2, sysinfo.freq_ddrbus));
|
|
} else {
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
"(Asynchronous), ",
|
|
strmhz(buf1, sysinfo.freq_ddrbus/2),
|
|
strmhz(buf2, sysinfo.freq_ddrbus));
|
|
}
|
|
#else
|
|
switch (ddr_ratio) {
|
|
case 0x0:
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
|
|
strmhz(buf1, sysinfo.freq_ddrbus/2),
|
|
strmhz(buf2, sysinfo.freq_ddrbus));
|
|
break;
|
|
case 0x7:
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
"(Synchronous), ",
|
|
strmhz(buf1, sysinfo.freq_ddrbus/2),
|
|
strmhz(buf2, sysinfo.freq_ddrbus));
|
|
break;
|
|
default:
|
|
printf(" DDR:%-4s MHz (%s MT/s data rate) "
|
|
"(Asynchronous), ",
|
|
strmhz(buf1, sysinfo.freq_ddrbus/2),
|
|
strmhz(buf2, sysinfo.freq_ddrbus));
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_FSL_LBC)
|
|
if (sysinfo.freq_localbus > LCRR_CLKDIV) {
|
|
printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
|
|
} else {
|
|
printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
|
|
sysinfo.freq_localbus);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_FSL_IFC)
|
|
printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
|
|
#endif
|
|
|
|
#ifdef CONFIG_QE
|
|
printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_CPRI)
|
|
printf(" ");
|
|
printf("CPRI:%-4s MHz", strmhz(buf1, sysinfo.freq_cpri));
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_MAPLE)
|
|
printf("\n ");
|
|
printf("MAPLE:%-4s MHz, ", strmhz(buf1, sysinfo.freq_maple));
|
|
printf("MAPLE-ULB:%-4s MHz, ", strmhz(buf1, sysinfo.freq_maple_ulb));
|
|
printf("MAPLE-eTVPE:%-4s MHz\n",
|
|
strmhz(buf1, sysinfo.freq_maple_etvpe));
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
for (i = 0; i < CFG_SYS_NUM_FMAN; i++) {
|
|
printf(" FMAN%d: %s MHz\n", i + 1,
|
|
strmhz(buf1, sysinfo.freq_fman[i]));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_QBMAN
|
|
printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_PME
|
|
printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
|
|
#endif
|
|
|
|
puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n");
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
/* Display the RCW, so that no one gets confused as to what RCW
|
|
* we're actually using for this boot.
|
|
*/
|
|
puts("Reset Configuration Word (RCW):");
|
|
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
|
|
u32 rcw = in_be32(&gur->rcwsr[i]);
|
|
|
|
if ((i % 4) == 0)
|
|
printf("\n %08x:", i * 4);
|
|
printf(" %08x", rcw);
|
|
}
|
|
puts("\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
/* Everything after the first generation of PQ3 parts has RSTCR */
|
|
#if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8560)
|
|
unsigned long val, msr;
|
|
|
|
/*
|
|
* Initiate hard reset in debug control register DBCR0
|
|
* Make sure MSR[DE] = 1. This only resets the core.
|
|
*/
|
|
msr = mfmsr ();
|
|
msr |= MSR_DE;
|
|
mtmsr (msr);
|
|
|
|
val = mfspr(DBCR0);
|
|
val |= 0x70000000;
|
|
mtspr(DBCR0,val);
|
|
#else
|
|
volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
/* Call board-specific preparation for reset */
|
|
board_reset_prepare();
|
|
|
|
/* Attempt board-specific reset */
|
|
board_reset();
|
|
|
|
/* Next try asserting HRESET_REQ */
|
|
out_be32(&gur->rstcr, 0x2);
|
|
udelay(100);
|
|
|
|
/* Attempt last-stage board-specific reset */
|
|
board_reset_last();
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* Get timebase clock frequency
|
|
*/
|
|
__weak unsigned long get_tbclk(void)
|
|
{
|
|
unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV;
|
|
|
|
return (gd->bus_clk + (tbclk_div >> 1)) / tbclk_div;
|
|
}
|
|
|
|
|
|
#ifndef CONFIG_WDT
|
|
#if defined(CONFIG_WATCHDOG)
|
|
#define WATCHDOG_MASK (TCR_WP(63) | TCR_WRC(3) | TCR_WIE)
|
|
void
|
|
init_85xx_watchdog(void)
|
|
{
|
|
mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WATCHDOG_MASK) |
|
|
TCR_WP(CFG_WATCHDOG_PRESC) | TCR_WRC(CFG_WATCHDOG_RC));
|
|
}
|
|
|
|
void
|
|
reset_85xx_watchdog(void)
|
|
{
|
|
/*
|
|
* Clear TSR(WIS) bit by writing 1
|
|
*/
|
|
mtspr(SPRN_TSR, TSR_WIS);
|
|
}
|
|
|
|
void
|
|
watchdog_reset(void)
|
|
{
|
|
int re_enable = disable_interrupts();
|
|
|
|
reset_85xx_watchdog();
|
|
if (re_enable)
|
|
enable_interrupts();
|
|
}
|
|
#endif /* CONFIG_WATCHDOG */
|
|
#endif
|
|
|
|
/*
|
|
* Initializes on-chip MMC controllers.
|
|
* to override, implement board_mmc_init()
|
|
*/
|
|
int cpu_mmc_init(struct bd_info *bis)
|
|
{
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
return fsl_esdhc_mmc_init(bis);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Print out the state of various machine registers.
|
|
* Currently prints out LAWs, BR0/OR0 for LBC, CSPR/CSOR/Timing
|
|
* parameters for IFC and TLBs
|
|
*/
|
|
void print_reginfo(void)
|
|
{
|
|
print_tlbcam();
|
|
#ifdef CONFIG_FSL_LAW
|
|
print_laws();
|
|
#endif
|
|
#if defined(CONFIG_FSL_LBC)
|
|
print_lbc_regs();
|
|
#endif
|
|
#ifdef CONFIG_FSL_IFC
|
|
print_ifc_regs();
|
|
#endif
|
|
|
|
}
|
|
|
|
/* Common ddr init for non-corenet fsl 85xx platforms */
|
|
#ifndef CONFIG_FSL_CORENET
|
|
#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
|
|
!defined(CFG_SYS_INIT_L2_ADDR)
|
|
int dram_init(void)
|
|
{
|
|
#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \
|
|
defined(CONFIG_ARCH_QEMU_E500)
|
|
gd->ram_size = fsl_ddr_sdram_size();
|
|
#else
|
|
gd->ram_size = (phys_size_t)CFG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#else /* CONFIG_SYS_RAMBOOT */
|
|
int dram_init(void)
|
|
{
|
|
phys_size_t dram_size = 0;
|
|
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
|
|
unsigned int x = 10;
|
|
unsigned int i;
|
|
|
|
/*
|
|
* Work around to stabilize DDR DLL
|
|
*/
|
|
out_be32(&gur->ddrdllcr, 0x81000000);
|
|
asm("sync;isync;msync");
|
|
udelay(200);
|
|
while (in_be32(&gur->ddrdllcr) != 0x81000100) {
|
|
setbits_be32(&gur->devdisr, 0x00010000);
|
|
for (i = 0; i < x; i++)
|
|
;
|
|
clrbits_be32(&gur->devdisr, 0x00010000);
|
|
x++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPD_EEPROM) || \
|
|
defined(CONFIG_DDR_SPD) || \
|
|
defined(CONFIG_SYS_DDR_RAW_TIMING)
|
|
dram_size = fsl_ddr_sdram();
|
|
#else
|
|
dram_size = fixed_sdram();
|
|
#endif
|
|
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
|
dram_size *= 0x100000;
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize and enable DDR ECC.
|
|
*/
|
|
ddr_enable_ecc(dram_size);
|
|
#endif
|
|
|
|
#if defined(CONFIG_FSL_LBC)
|
|
/* Some boards also have sdram on the lbc */
|
|
lbc_sdram_init();
|
|
#endif
|
|
|
|
debug("DDR: ");
|
|
gd->ram_size = dram_size;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SYS_RAMBOOT */
|
|
#endif
|
|
|
|
#if CFG_POST & CFG_SYS_POST_MEMORY
|
|
|
|
/* Board-specific functions defined in each board's ddr.c */
|
|
void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
|
|
unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl);
|
|
void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
|
|
phys_addr_t *rpn);
|
|
unsigned int
|
|
setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
|
|
|
|
void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
|
|
|
|
static void dump_spd_ddr_reg(void)
|
|
{
|
|
int i, j, k, m;
|
|
u8 *p_8;
|
|
u32 *p_32;
|
|
struct ccsr_ddr __iomem *ddr[CONFIG_SYS_NUM_DDR_CTLRS];
|
|
generic_spd_eeprom_t
|
|
spd[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_DIMM_SLOTS_PER_CTLR];
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++)
|
|
fsl_ddr_get_spd(spd[i], i, CONFIG_DIMM_SLOTS_PER_CTLR);
|
|
|
|
puts("SPD data of all dimms (zero value is omitted)...\n");
|
|
puts("Byte (hex) ");
|
|
k = 1;
|
|
for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
|
|
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++)
|
|
printf("Dimm%d ", k++);
|
|
}
|
|
puts("\n");
|
|
for (k = 0; k < sizeof(generic_spd_eeprom_t); k++) {
|
|
m = 0;
|
|
printf("%3d (0x%02x) ", k, k);
|
|
for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
|
|
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
|
|
p_8 = (u8 *) &spd[i][j];
|
|
if (p_8[k]) {
|
|
printf("0x%02x ", p_8[k]);
|
|
m++;
|
|
} else
|
|
puts(" ");
|
|
}
|
|
}
|
|
if (m)
|
|
puts("\n");
|
|
else
|
|
puts("\r");
|
|
}
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
|
|
switch (i) {
|
|
case 0:
|
|
ddr[i] = (void *)CFG_SYS_FSL_DDR_ADDR;
|
|
break;
|
|
#if defined(CFG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
|
|
case 1:
|
|
ddr[i] = (void *)CFG_SYS_FSL_DDR2_ADDR;
|
|
break;
|
|
#endif
|
|
#if defined(CFG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
|
|
case 2:
|
|
ddr[i] = (void *)CFG_SYS_FSL_DDR3_ADDR;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
|
|
case 3:
|
|
ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("%s unexpected controller number = %u\n",
|
|
__func__, i);
|
|
return;
|
|
}
|
|
}
|
|
printf("DDR registers dump for all controllers "
|
|
"(zero value is omitted)...\n");
|
|
puts("Offset (hex) ");
|
|
for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++)
|
|
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
|
|
puts("\n");
|
|
for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
|
|
m = 0;
|
|
printf("%6d (0x%04x)", k * 4, k * 4);
|
|
for (i = 0; i < CONFIG_SYS_NUM_DDR_CTLRS; i++) {
|
|
p_32 = (u32 *) ddr[i];
|
|
if (p_32[k]) {
|
|
printf(" 0x%08x", p_32[k]);
|
|
m++;
|
|
} else
|
|
puts(" ");
|
|
}
|
|
if (m)
|
|
puts("\n");
|
|
else
|
|
puts("\r");
|
|
}
|
|
puts("\n");
|
|
}
|
|
|
|
/* invalid the TLBs for DDR and setup new ones to cover p_addr */
|
|
static int reset_tlb(phys_addr_t p_addr, u32 size, phys_addr_t *phys_offset)
|
|
{
|
|
u32 vstart = CFG_SYS_DDR_SDRAM_BASE;
|
|
unsigned long epn;
|
|
u32 tsize, valid, ptr;
|
|
int ddr_esel;
|
|
|
|
clear_ddr_tlbs_phys(p_addr, size>>20);
|
|
|
|
/* Setup new tlb to cover the physical address */
|
|
setup_ddr_tlbs_phys(p_addr, size>>20);
|
|
|
|
ptr = vstart;
|
|
ddr_esel = find_tlb_idx((void *)ptr, 1);
|
|
if (ddr_esel != -1) {
|
|
read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, phys_offset);
|
|
} else {
|
|
printf("TLB error in function %s\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* slide the testing window up to test another area
|
|
* for 32_bit system, the maximum testable memory is limited to
|
|
* CFG_MAX_MEM_MAPPED
|
|
*/
|
|
int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
phys_addr_t test_cap, p_addr;
|
|
phys_size_t p_size = min(gd->ram_size, CFG_MAX_MEM_MAPPED);
|
|
|
|
#if !defined(CONFIG_PHYS_64BIT) || \
|
|
!defined(CFG_SYS_INIT_RAM_ADDR_PHYS) || \
|
|
(CFG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull)
|
|
test_cap = p_size;
|
|
#else
|
|
test_cap = gd->ram_size;
|
|
#endif
|
|
p_addr = (*vstart) + (*size) + (*phys_offset);
|
|
if (p_addr < test_cap - 1) {
|
|
p_size = min(test_cap - p_addr, CFG_MAX_MEM_MAPPED);
|
|
if (reset_tlb(p_addr, p_size, phys_offset) == -1)
|
|
return -1;
|
|
*vstart = CFG_SYS_DDR_SDRAM_BASE;
|
|
*size = (u32) p_size;
|
|
printf("Testing 0x%08llx - 0x%08llx\n",
|
|
(u64)(*vstart) + (*phys_offset),
|
|
(u64)(*vstart) + (*phys_offset) + (*size) - 1);
|
|
} else
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* initialization for testing area */
|
|
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
phys_size_t p_size = min(gd->ram_size, CFG_MAX_MEM_MAPPED);
|
|
|
|
*vstart = CFG_SYS_DDR_SDRAM_BASE;
|
|
*size = (u32) p_size; /* CFG_MAX_MEM_MAPPED < 4G */
|
|
*phys_offset = 0;
|
|
|
|
#if !defined(CONFIG_PHYS_64BIT) || \
|
|
!defined(CFG_SYS_INIT_RAM_ADDR_PHYS) || \
|
|
(CFG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull)
|
|
if (gd->ram_size > CFG_MAX_MEM_MAPPED) {
|
|
puts("Cannot test more than ");
|
|
print_size(CFG_MAX_MEM_MAPPED,
|
|
" without proper 36BIT support.\n");
|
|
}
|
|
#endif
|
|
printf("Testing 0x%08llx - 0x%08llx\n",
|
|
(u64)(*vstart) + (*phys_offset),
|
|
(u64)(*vstart) + (*phys_offset) + (*size) - 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* invalid TLBs for DDR and remap as normal after testing */
|
|
int arch_memory_test_cleanup(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
unsigned long epn;
|
|
u32 tsize, valid, ptr;
|
|
phys_addr_t rpn = 0;
|
|
int ddr_esel;
|
|
|
|
/* disable the TLBs for this testing */
|
|
ptr = *vstart;
|
|
|
|
while (ptr < (*vstart) + (*size)) {
|
|
ddr_esel = find_tlb_idx((void *)ptr, 1);
|
|
if (ddr_esel != -1) {
|
|
read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, &rpn);
|
|
disable_tlb(ddr_esel);
|
|
}
|
|
ptr += TSIZE_TO_BYTES(tsize);
|
|
}
|
|
|
|
puts("Remap DDR ");
|
|
setup_ddr_tlbs(gd->ram_size>>20);
|
|
puts("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
void arch_memory_failure_handle(void)
|
|
{
|
|
dump_spd_ddr_reg();
|
|
}
|
|
#endif
|