mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 00:33:06 +00:00
5668c75ce9
Configure PMIC voltages for early stages using updated early i2c write. Tested-by: Thierry Reding <treding@nvidia.com> # Beaver T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
125 lines
3.1 KiB
C
125 lines
3.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2010-2014, NVIDIA CORPORATION. All rights reserved.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/flow.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/pmc.h>
|
|
#include <asm/arch-tegra/tegra_i2c.h>
|
|
#include <linux/delay.h>
|
|
#include "../cpu.h"
|
|
|
|
/* In case this function is not defined */
|
|
__weak void pmic_enable_cpu_vdd(void) {}
|
|
|
|
static void enable_cpu_power_rail(void)
|
|
{
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
u32 reg;
|
|
|
|
debug("enable_cpu_power_rail entry\n");
|
|
reg = readl(&pmc->pmc_cntrl);
|
|
reg |= CPUPWRREQ_OE;
|
|
writel(reg, &pmc->pmc_cntrl);
|
|
}
|
|
|
|
/**
|
|
* The T30 requires some special clock initialization, including setting up
|
|
* the dvc i2c, turning on mselect and selecting the G CPU cluster
|
|
*/
|
|
void t30_init_clocks(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
|
|
u32 val;
|
|
|
|
debug("t30_init_clocks entry\n");
|
|
/* Set active CPU cluster to G */
|
|
clrbits_le32(flow->cluster_control, 1 << 0);
|
|
|
|
writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
|
|
|
|
val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) |
|
|
(1 << CLK_SYS_RATE_AHB_RATE_SHIFT) |
|
|
(0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) |
|
|
(0 << CLK_SYS_RATE_APB_RATE_SHIFT);
|
|
writel(val, &clkrst->crc_clk_sys_rate);
|
|
|
|
/* Put i2c, mselect in reset and enable clocks */
|
|
reset_set_enable(PERIPH_ID_DVC_I2C, 1);
|
|
clock_set_enable(PERIPH_ID_DVC_I2C, 1);
|
|
reset_set_enable(PERIPH_ID_MSELECT, 1);
|
|
clock_set_enable(PERIPH_ID_MSELECT, 1);
|
|
|
|
/* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */
|
|
clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2);
|
|
|
|
/*
|
|
* Our high-level clock routines are not available prior to
|
|
* relocation. We use the low-level functions which require a
|
|
* hard-coded divisor. Use CLK_M with divide by (n + 1 = 17)
|
|
*/
|
|
clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16);
|
|
|
|
/*
|
|
* Give clocks time to stabilize, then take i2c and mselect out of
|
|
* reset
|
|
*/
|
|
udelay(1000);
|
|
reset_set_enable(PERIPH_ID_DVC_I2C, 0);
|
|
reset_set_enable(PERIPH_ID_MSELECT, 0);
|
|
}
|
|
|
|
static void set_cpu_running(int run)
|
|
{
|
|
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
|
|
|
|
debug("set_cpu_running entry, run = %d\n", run);
|
|
writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events);
|
|
}
|
|
|
|
void start_cpu(u32 reset_vector)
|
|
{
|
|
debug("start_cpu entry, reset_vector = %x\n", reset_vector);
|
|
t30_init_clocks();
|
|
|
|
/* Enable VDD_CPU */
|
|
enable_cpu_power_rail();
|
|
pmic_enable_cpu_vdd();
|
|
|
|
set_cpu_running(0);
|
|
|
|
/* Hold the CPUs in reset */
|
|
reset_A9_cpu(1);
|
|
|
|
/* Disable the CPU clock */
|
|
enable_cpu_clock(0);
|
|
|
|
/* Enable CoreSight */
|
|
clock_enable_coresight(1);
|
|
|
|
/*
|
|
* Set the entry point for CPU execution from reset,
|
|
* if it's a non-zero value.
|
|
*/
|
|
if (reset_vector)
|
|
writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
|
|
|
|
/* Enable the CPU clock */
|
|
enable_cpu_clock(1);
|
|
|
|
/* If the CPU doesn't already have power, power it up */
|
|
powerup_cpu();
|
|
|
|
/* Take the CPU out of reset */
|
|
reset_A9_cpu(0);
|
|
|
|
set_cpu_running(1);
|
|
}
|