mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 00:03:24 +00:00
cc07b6c346
The SK architecture comprises of baseboard and a SOM board. The AM68 Starter Kit's baseboard contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the base board. Therefore, add support for peripherals brought out in the base board. Schematics: https://www.ti.com/lit/zip/SPRR463 Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
353 lines
7 KiB
Text
353 lines
7 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
|
|
*
|
|
* Base Board: **Yet to Add**
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "k3-am68-sk-som.dtsi"
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
#include <dt-bindings/phy/phy-cadence.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
/ {
|
|
compatible = "ti,am68-sk", "ti,j721s2";
|
|
model = "Texas Instruments AM68 SK";
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x2880000";
|
|
};
|
|
|
|
aliases {
|
|
serial2 = &main_uart8;
|
|
mmc1 = &main_sdhci1;
|
|
};
|
|
|
|
vusb_main: fixedregulator-vusb-main5v0 {
|
|
/* USB MAIN INPUT 5V DC */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vusb-main5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsys_3v3: fixedregulator-vsys3v3 {
|
|
/* Output of LM5141 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vusb_main>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_mmc1: fixedregulator-sd {
|
|
/* Output of TPS22918 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_mmc1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
vin-supply = <&vsys_3v3>;
|
|
gpio = <&exp1 10 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vdd_sd_dv: gpio-regulator-TLV71033 {
|
|
/* Output of TLV71033 */
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "tlv71033";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vdd_sd_dv_pins_default>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
vin-supply = <&vsys_3v3>;
|
|
gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
|
|
states = <1800000 0x0>,
|
|
<3300000 0x1>;
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
main_uart8_pins_default: main-uart8-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */
|
|
J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */
|
|
J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
|
|
J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
|
|
>;
|
|
};
|
|
|
|
main_i2c0_pins_default: i2c0-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */
|
|
J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */
|
|
>;
|
|
};
|
|
|
|
main_mmc1_pins_default: main-mmc1-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
|
|
J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
|
|
J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
|
|
J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
|
|
J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
|
|
J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
|
|
J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
|
|
J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
|
|
>;
|
|
};
|
|
|
|
vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_IOPAD(0x0c4, PIN_INPUT, 7) /* (AB26) ECAP0_IN_APWM_OUT.GPIO0_49 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&wkup_pmx0 {
|
|
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
|
|
J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
|
|
J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
|
|
J721S2_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
|
|
J721S2_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
|
|
J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
|
|
J721S2_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
|
|
J721S2_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
|
|
J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
|
|
J721S2_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
|
|
J721S2_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
|
|
J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
|
|
>;
|
|
};
|
|
|
|
mcu_mdio_pins_default: mcu-mdio-pins-default {
|
|
pinctrl-single,pins = <
|
|
J721S2_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
|
|
J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_gpio2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_gpio6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wkup_gpio1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&wkup_uart0 {
|
|
status = "reserved";
|
|
};
|
|
|
|
&main_uart0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart7 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_uart8 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_uart8_pins_default>;
|
|
/* Shared with TFA on this platform */
|
|
power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
|
|
};
|
|
|
|
&main_uart9 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_i2c0_pins_default>;
|
|
clock-frequency = <400000>;
|
|
|
|
exp1: gpio@21 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x21>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPN", "HDMI_PDN",
|
|
"HDMI_LS_OE", "DP0_3V3_EN", "BOARDID_EEPROM_WP",
|
|
"CAN_STB", "","GPIO_uSD_PWR_EN", "EDP_ENABLE",
|
|
"IO_EXP_PCIE1_M2_RSTZ", "IO_EXP_MCU_RGMII_RSTZ",
|
|
"IO_EXP_CSI1_EXP_RSTZ", "","CSI0_B_GPIO1",
|
|
"CSI1_B_GPIO1";
|
|
};
|
|
};
|
|
|
|
&main_i2c1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_sdhci0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_sdhci1 {
|
|
/* SD card */
|
|
pinctrl-0 = <&main_mmc1_pins_default>;
|
|
pinctrl-names = "default";
|
|
disable-wp;
|
|
vmmc-supply = <&vdd_mmc1>;
|
|
vqmmc-supply = <&vdd_sd_dv>;
|
|
};
|
|
|
|
&mcu_cpsw {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
ti,min-output-impedance;
|
|
};
|
|
};
|
|
|
|
&cpsw_port1 {
|
|
phy-mode = "rgmii-rxid";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
&mcu_mcan0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mcu_mcan1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan5 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan6 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan7 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan8 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan9 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan10 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan11 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan12 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan13 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan14 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan15 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_mcan17 {
|
|
status = "disabled";
|
|
};
|