mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
302f7e80b9
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB. Signed-off-by: Marek Vasut <marex@denx.de>
124 lines
3.1 KiB
C
124 lines
3.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2022 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <hang.h>
|
|
#include <image.h>
|
|
#include <init.h>
|
|
#include <spl.h>
|
|
|
|
#include <asm-generic/gpio.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/ddr.h>
|
|
#include <asm/arch/imx8mp_pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
|
|
#include <dm/uclass.h>
|
|
#include <dm/device.h>
|
|
#include <dm/uclass-internal.h>
|
|
#include <dm/device-internal.h>
|
|
|
|
#include <power/pmic.h>
|
|
#include <power/pca9450.h>
|
|
|
|
#include "lpddr4_timing.h"
|
|
|
|
#include "../common/common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int data_modul_imx_edm_sbc_board_power_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = pmic_get("pmic@25", &dev);
|
|
if (ret == -ENODEV) {
|
|
puts("Failed to get PMIC\n");
|
|
return 0;
|
|
}
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* BUCKxOUT_DVS0/1 control BUCK123 output. */
|
|
pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
|
|
|
|
/* Increase VDD_SOC to typical value 0.95V before first DRAM access. */
|
|
if (IS_ENABLED(CONFIG_IMX8M_VDD_SOC_850MV))
|
|
/* Set DVS0 to 0.85V for special case. */
|
|
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14);
|
|
else
|
|
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1c);
|
|
|
|
/* Set DVS1 to 0.85v for suspend. */
|
|
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14);
|
|
|
|
/*
|
|
* Enable DVS control through PMIC_STBY_REQ and
|
|
* set B1_ENMODE=1 (ON by PMIC_ON_REQ=H).
|
|
*/
|
|
pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
|
|
|
|
/* Kernel uses OD/OD frequency for SoC. */
|
|
|
|
/* To avoid timing risk from SoC to ARM, increase VDD_ARM to OD voltage 0.95V */
|
|
pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1c);
|
|
|
|
/* Set LDO4 and CONFIG2 to enable the I2C level translator. */
|
|
pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x59);
|
|
pmic_reg_write(dev, PCA9450_CONFIG2, 0x1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int spl_board_boot_device(enum boot_device boot_dev_spl)
|
|
{
|
|
if (boot_dev_spl == SPI_NOR_BOOT) /* SPI NOR */
|
|
return BOOT_DEVICE_SPI;
|
|
|
|
if (boot_dev_spl == MMC3_BOOT) /* eMMC */
|
|
return BOOT_DEVICE_MMC2;
|
|
|
|
return BOOT_DEVICE_MMC1; /* SD */
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
int boot_device = spl_boot_device();
|
|
|
|
spl_boot_list[0] = boot_device; /* 1:SD 2:eMMC 8:SPI NOR */
|
|
|
|
if (boot_device == BOOT_DEVICE_SPI) { /* SPI, eMMC, SD */
|
|
spl_boot_list[1] = BOOT_DEVICE_MMC2; /* eMMC */
|
|
spl_boot_list[2] = BOOT_DEVICE_MMC1; /* SD */
|
|
} else if (boot_device == BOOT_DEVICE_MMC1) { /* SD, eMMC, SPI */
|
|
spl_boot_list[1] = BOOT_DEVICE_MMC2; /* eMMC */
|
|
spl_boot_list[2] = BOOT_DEVICE_SPI; /* SPI */
|
|
} else { /* eMMC, SPI, SD */
|
|
spl_boot_list[1] = BOOT_DEVICE_SPI; /* SPI */
|
|
spl_boot_list[2] = BOOT_DEVICE_MMC1; /* SD */
|
|
}
|
|
|
|
spl_boot_list[3] = BOOT_DEVICE_UART; /* YModem */
|
|
spl_boot_list[4] = BOOT_DEVICE_NONE;
|
|
}
|
|
|
|
static struct dram_timing_info *dram_timing_info[8] = {
|
|
&dmo_imx8mp_sbc_dram_timing_32_32, /* 32 Gbit x32 */
|
|
NULL, /* 32 Gbit x16 */
|
|
NULL, /* 16 Gbit x32 */
|
|
NULL, /* 16 Gbit x16 */
|
|
NULL, /* 8 Gbit x32 */
|
|
NULL, /* 8 Gbit x16 */
|
|
NULL, /* INVALID */
|
|
NULL, /* INVALID */
|
|
};
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
dmo_board_init_f(MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B, dram_timing_info);
|
|
}
|