mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
332facce6f
Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The eeprom0 alias and
PHY reset GPIO are now reinstated in SoM u-boot dtsi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
325 lines
6.3 KiB
Text
325 lines
6.3 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart4;
|
|
serial1 = &usart3;
|
|
serial2 = &uart8;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clk_ext_audio_codec: clock-codec {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
display_bl: display-bl {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
|
|
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
|
|
default-brightness-level = <8>;
|
|
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
|
|
power-supply = <®_panel_bl>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
poll-interval = <20>;
|
|
|
|
/*
|
|
* The EXTi IRQ line 3 is shared with ethernet,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-0 {
|
|
label = "TA1-GPIO-A";
|
|
linux,code = <KEY_A>;
|
|
gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/*
|
|
* The EXTi IRQ line 6 is shared with touchscreen,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-1 {
|
|
label = "TA2-GPIO-B";
|
|
linux,code = <KEY_B>;
|
|
gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/*
|
|
* The EXTi IRQ line 0 is shared with PMIC,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-2 {
|
|
label = "TA3-GPIO-C";
|
|
linux,code = <KEY_C>;
|
|
gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-3 {
|
|
label = "TA4-GPIO-D";
|
|
linux,code = <KEY_D>;
|
|
gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
led {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "green:led5";
|
|
gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
status = "disabled";
|
|
};
|
|
|
|
led-1 {
|
|
label = "green:led6";
|
|
gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-2 {
|
|
label = "green:led7";
|
|
gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-3 {
|
|
label = "green:led8";
|
|
gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
panel {
|
|
compatible = "edt,etm0700g0edh6";
|
|
backlight = <&display_bl>;
|
|
power-supply = <®_panel_bl>;
|
|
|
|
port {
|
|
lcd_panel_in: endpoint {
|
|
remote-endpoint = <&lcd_display_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_panel_bl: regulator-panel-bl {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "panel_backlight";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <®_panel_supply>;
|
|
};
|
|
|
|
reg_panel_supply: regulator-panel-supply {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "panel_supply";
|
|
regulator-min-microvolt = <24000000>;
|
|
regulator-max-microvolt = <24000000>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "audio-graph-card";
|
|
routing =
|
|
"MIC_IN", "Capture",
|
|
"Capture", "Mic Bias",
|
|
"Playback", "HP_OUT";
|
|
dais = <&sai2a_port &sai2b_port>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&cec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cec_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 { /* Header X22 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c5 { /* Header X21 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
sgtl5000: codec@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
#sound-dai-cells = <0>;
|
|
clocks = <&clk_ext_audio_codec>;
|
|
VDDA-supply = <&v3v3>;
|
|
VDDIO-supply = <&vdd>;
|
|
|
|
sgtl5000_port: port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sgtl5000_tx_endpoint: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&sai2a_endpoint>;
|
|
frame-master = <&sgtl5000_tx_endpoint>;
|
|
bitclock-master = <&sgtl5000_tx_endpoint>;
|
|
};
|
|
|
|
sgtl5000_rx_endpoint: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&sai2b_endpoint>;
|
|
frame-master = <&sgtl5000_rx_endpoint>;
|
|
bitclock-master = <&sgtl5000_rx_endpoint>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
touchscreen@38 {
|
|
compatible = "edt,edt-ft5406";
|
|
reg = <0x38>;
|
|
interrupt-parent = <&gpioc>;
|
|
interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
|
|
};
|
|
};
|
|
|
|
<dc {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <<dc_pins_b>;
|
|
pinctrl-1 = <<dc_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
port {
|
|
lcd_display_out: endpoint {
|
|
remote-endpoint = <&lcd_panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sai2 {
|
|
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
|
clock-names = "pclk", "x8k", "x11k";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
|
|
pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
sai2a: audio-controller@4400b004 {
|
|
#clock-cells = <0>;
|
|
dma-names = "tx";
|
|
clocks = <&rcc SAI2_K>;
|
|
clock-names = "sai_ck";
|
|
status = "okay";
|
|
|
|
sai2a_port: port {
|
|
sai2a_endpoint: endpoint {
|
|
remote-endpoint = <&sgtl5000_tx_endpoint>;
|
|
format = "i2s";
|
|
mclk-fs = <512>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <16>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sai2b: audio-controller@4400b024 {
|
|
dma-names = "rx";
|
|
st,sync = <&sai2a 2>;
|
|
clocks = <&rcc SAI2_K>, <&sai2a>;
|
|
clock-names = "sai_ck", "MCLK";
|
|
status = "okay";
|
|
|
|
sai2b_port: port {
|
|
sai2b_endpoint: endpoint {
|
|
remote-endpoint = <&sgtl5000_rx_endpoint>;
|
|
format = "i2s";
|
|
mclk-fs = <512>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <16>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&timers2 {
|
|
/* spare dmas for other usage (un-delete to enable pwm capture) */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
pwm2: pwm {
|
|
pinctrl-0 = <&pwm2_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
timer@1 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&usart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usart3_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart8 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ehci {
|
|
phys = <&usbphyc_port0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "otg";
|
|
pinctrl-0 = <&usbotg_hs_pins_a>;
|
|
pinctrl-names = "default";
|
|
phy-names = "usb2-phy";
|
|
phys = <&usbphyc_port1 0>;
|
|
vbus-supply = <&vbus_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|