mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
653 lines
17 KiB
C
653 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2006,2009 Freescale Semiconductor, Inc.
|
|
*
|
|
* 2012, Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
* Changes for multibus/multiadapter I2C support.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <i2c.h> /* Functional interface */
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_i2c.h> /* HW definitions */
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <mapmem.h>
|
|
|
|
/* The maximum number of microseconds we will wait until another master has
|
|
* released the bus. If not defined in the board header file, then use a
|
|
* generic value.
|
|
*/
|
|
#ifndef CONFIG_I2C_MBB_TIMEOUT
|
|
#define CONFIG_I2C_MBB_TIMEOUT 100000
|
|
#endif
|
|
|
|
/* The maximum number of microseconds we will wait for a read or write
|
|
* operation to complete. If not defined in the board header file, then use a
|
|
* generic value.
|
|
*/
|
|
#ifndef CONFIG_I2C_TIMEOUT
|
|
#define CONFIG_I2C_TIMEOUT 100000
|
|
#endif
|
|
|
|
#define I2C_READ_BIT 1
|
|
#define I2C_WRITE_BIT 0
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_DM_I2C
|
|
static const struct fsl_i2c_base *i2c_base[4] = {
|
|
(struct fsl_i2c_base *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C_OFFSET),
|
|
#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
|
|
(struct fsl_i2c_base *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C2_OFFSET),
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_I2C3_OFFSET
|
|
(struct fsl_i2c_base *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C3_OFFSET),
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_I2C4_OFFSET
|
|
(struct fsl_i2c_base *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C4_OFFSET)
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
/* I2C speed map for a DFSR value of 1 */
|
|
|
|
#ifdef __M68K__
|
|
/*
|
|
* Map I2C frequency dividers to FDR and DFSR values
|
|
*
|
|
* This structure is used to define the elements of a table that maps I2C
|
|
* frequency divider (I2C clock rate divided by I2C bus speed) to a value to be
|
|
* programmed into the Frequency Divider Ratio (FDR) and Digital Filter
|
|
* Sampling Rate (DFSR) registers.
|
|
*
|
|
* The actual table should be defined in the board file, and it must be called
|
|
* fsl_i2c_speed_map[].
|
|
*
|
|
* The last entry of the table must have a value of {-1, X}, where X is same
|
|
* FDR/DFSR values as the second-to-last entry. This guarantees that any
|
|
* search through the array will always find a match.
|
|
*
|
|
* The values of the divider must be in increasing numerical order, i.e.
|
|
* fsl_i2c_speed_map[x+1].divider > fsl_i2c_speed_map[x].divider.
|
|
*
|
|
* For this table, the values are based on a value of 1 for the DFSR
|
|
* register. See the application note AN2919 "Determining the I2C Frequency
|
|
* Divider Ratio for SCL"
|
|
*
|
|
* ColdFire I2C frequency dividers for FDR values are different from
|
|
* PowerPC. The protocol to use the I2C module is still the same.
|
|
* A different table is defined and are based on MCF5xxx user manual.
|
|
*
|
|
*/
|
|
static const struct {
|
|
unsigned short divider;
|
|
u8 fdr;
|
|
} fsl_i2c_speed_map[] = {
|
|
{20, 32}, {22, 33}, {24, 34}, {26, 35},
|
|
{28, 0}, {28, 36}, {30, 1}, {32, 37},
|
|
{34, 2}, {36, 38}, {40, 3}, {40, 39},
|
|
{44, 4}, {48, 5}, {48, 40}, {56, 6},
|
|
{56, 41}, {64, 42}, {68, 7}, {72, 43},
|
|
{80, 8}, {80, 44}, {88, 9}, {96, 41},
|
|
{104, 10}, {112, 42}, {128, 11}, {128, 43},
|
|
{144, 12}, {160, 13}, {160, 48}, {192, 14},
|
|
{192, 49}, {224, 50}, {240, 15}, {256, 51},
|
|
{288, 16}, {320, 17}, {320, 52}, {384, 18},
|
|
{384, 53}, {448, 54}, {480, 19}, {512, 55},
|
|
{576, 20}, {640, 21}, {640, 56}, {768, 22},
|
|
{768, 57}, {960, 23}, {896, 58}, {1024, 59},
|
|
{1152, 24}, {1280, 25}, {1280, 60}, {1536, 26},
|
|
{1536, 61}, {1792, 62}, {1920, 27}, {2048, 63},
|
|
{2304, 28}, {2560, 29}, {3072, 30}, {3840, 31},
|
|
{-1, 31}
|
|
};
|
|
#endif
|
|
|
|
/**
|
|
* Set the I2C bus speed for a given I2C device
|
|
*
|
|
* @param base: the I2C device registers
|
|
* @i2c_clk: I2C bus clock frequency
|
|
* @speed: the desired speed of the bus
|
|
*
|
|
* The I2C device must be stopped before calling this function.
|
|
*
|
|
* The return value is the actual bus speed that is set.
|
|
*/
|
|
static uint set_i2c_bus_speed(const struct fsl_i2c_base *base,
|
|
uint i2c_clk, uint speed)
|
|
{
|
|
ushort divider = min(i2c_clk / speed, (uint)USHRT_MAX);
|
|
|
|
/*
|
|
* We want to choose an FDR/DFSR that generates an I2C bus speed that
|
|
* is equal to or lower than the requested speed. That means that we
|
|
* want the first divider that is equal to or greater than the
|
|
* calculated divider.
|
|
*/
|
|
#ifdef __PPC__
|
|
u8 dfsr, fdr = 0x31; /* Default if no FDR found */
|
|
/* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */
|
|
ushort a, b, ga, gb;
|
|
ulong c_div, est_div;
|
|
|
|
#ifdef CONFIG_FSL_I2C_CUSTOM_DFSR
|
|
dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR;
|
|
#else
|
|
/* Condition 1: dfsr <= 50/T */
|
|
dfsr = (5 * (i2c_clk / 1000)) / 100000;
|
|
#endif
|
|
#ifdef CONFIG_FSL_I2C_CUSTOM_FDR
|
|
fdr = CONFIG_FSL_I2C_CUSTOM_FDR;
|
|
speed = i2c_clk / divider; /* Fake something */
|
|
#else
|
|
debug("Requested speed:%d, i2c_clk:%d\n", speed, i2c_clk);
|
|
if (!dfsr)
|
|
dfsr = 1;
|
|
|
|
est_div = ~0;
|
|
for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) {
|
|
for (gb = 0; gb < 8; gb++) {
|
|
b = 16 << gb;
|
|
c_div = b * (a + ((3 * dfsr) / b) * 2);
|
|
if (c_div > divider && c_div < est_div) {
|
|
ushort bin_gb, bin_ga;
|
|
|
|
est_div = c_div;
|
|
bin_gb = gb << 2;
|
|
bin_ga = (ga & 0x3) | ((ga & 0x4) << 3);
|
|
fdr = bin_gb | bin_ga;
|
|
speed = i2c_clk / est_div;
|
|
|
|
debug("FDR: 0x%.2x, ", fdr);
|
|
debug("div: %ld, ", est_div);
|
|
debug("ga: 0x%x, gb: 0x%x, ", ga, gb);
|
|
debug("a: %d, b: %d, speed: %d\n", a, b, speed);
|
|
|
|
/* Condition 2 not accounted for */
|
|
debug("Tr <= %d ns\n",
|
|
(b - 3 * dfsr) * 1000000 /
|
|
(i2c_clk / 1000));
|
|
}
|
|
}
|
|
if (a == 20)
|
|
a += 2;
|
|
if (a == 24)
|
|
a += 4;
|
|
}
|
|
debug("divider: %d, est_div: %ld, DFSR: %d\n", divider, est_div, dfsr);
|
|
debug("FDR: 0x%.2x, speed: %d\n", fdr, speed);
|
|
#endif
|
|
writeb(dfsr, &base->dfsrr); /* set default filter */
|
|
writeb(fdr, &base->fdr); /* set bus speed */
|
|
#else
|
|
uint i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
|
|
if (fsl_i2c_speed_map[i].divider >= divider) {
|
|
u8 fdr;
|
|
|
|
fdr = fsl_i2c_speed_map[i].fdr;
|
|
speed = i2c_clk / fsl_i2c_speed_map[i].divider;
|
|
writeb(fdr, &base->fdr); /* set bus speed */
|
|
|
|
break;
|
|
}
|
|
#endif
|
|
return speed;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_I2C
|
|
static uint get_i2c_clock(int bus)
|
|
{
|
|
if (bus)
|
|
return gd->arch.i2c2_clk; /* I2C2 clock */
|
|
else
|
|
return gd->arch.i2c1_clk; /* I2C1 clock */
|
|
}
|
|
#endif
|
|
|
|
static int fsl_i2c_fixup(const struct fsl_i2c_base *base)
|
|
{
|
|
const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
|
|
unsigned long long timeval = 0;
|
|
int ret = -1;
|
|
uint flags = 0;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
|
|
uint svr = get_svr();
|
|
|
|
if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
|
|
(SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
|
|
flags = I2C_CR_BIT6;
|
|
#endif
|
|
|
|
writeb(I2C_CR_MEN | I2C_CR_MSTA, &base->cr);
|
|
|
|
timeval = get_ticks();
|
|
while (!(readb(&base->sr) & I2C_SR_MBB)) {
|
|
if ((get_ticks() - timeval) > timeout)
|
|
goto err;
|
|
}
|
|
|
|
if (readb(&base->sr) & I2C_SR_MAL) {
|
|
/* SDA is stuck low */
|
|
writeb(0, &base->cr);
|
|
udelay(100);
|
|
writeb(I2C_CR_MSTA | flags, &base->cr);
|
|
writeb(I2C_CR_MEN | I2C_CR_MSTA | flags, &base->cr);
|
|
}
|
|
|
|
readb(&base->dr);
|
|
|
|
timeval = get_ticks();
|
|
while (!(readb(&base->sr) & I2C_SR_MIF)) {
|
|
if ((get_ticks() - timeval) > timeout)
|
|
goto err;
|
|
}
|
|
ret = 0;
|
|
|
|
err:
|
|
writeb(I2C_CR_MEN | flags, &base->cr);
|
|
writeb(0, &base->sr);
|
|
udelay(100);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __i2c_init(const struct fsl_i2c_base *base, int speed, int
|
|
slaveadd, int i2c_clk, int busnum)
|
|
{
|
|
const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
|
|
unsigned long long timeval;
|
|
|
|
#ifdef CONFIG_SYS_I2C_INIT_BOARD
|
|
/* Call board specific i2c bus reset routine before accessing the
|
|
* environment, which might be in a chip on that bus. For details
|
|
* about this problem see doc/I2C_Edge_Conditions.
|
|
*/
|
|
i2c_init_board();
|
|
#endif
|
|
writeb(0, &base->cr); /* stop I2C controller */
|
|
udelay(5); /* let it shutdown in peace */
|
|
set_i2c_bus_speed(base, i2c_clk, speed);
|
|
writeb(slaveadd << 1, &base->adr);/* write slave address */
|
|
writeb(0x0, &base->sr); /* clear status register */
|
|
writeb(I2C_CR_MEN, &base->cr); /* start I2C controller */
|
|
|
|
timeval = get_ticks();
|
|
while (readb(&base->sr) & I2C_SR_MBB) {
|
|
if ((get_ticks() - timeval) < timeout)
|
|
continue;
|
|
|
|
if (fsl_i2c_fixup(base))
|
|
debug("i2c_init: BUS#%d failed to init\n",
|
|
busnum);
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int i2c_wait4bus(const struct fsl_i2c_base *base)
|
|
{
|
|
unsigned long long timeval = get_ticks();
|
|
const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
|
|
|
|
while (readb(&base->sr) & I2C_SR_MBB) {
|
|
if ((get_ticks() - timeval) > timeout)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_wait(const struct fsl_i2c_base *base, int write)
|
|
{
|
|
u32 csr;
|
|
unsigned long long timeval = get_ticks();
|
|
const unsigned long long timeout = usec2ticks(CONFIG_I2C_TIMEOUT);
|
|
|
|
do {
|
|
csr = readb(&base->sr);
|
|
if (!(csr & I2C_SR_MIF))
|
|
continue;
|
|
/* Read again to allow register to stabilise */
|
|
csr = readb(&base->sr);
|
|
|
|
writeb(0x0, &base->sr);
|
|
|
|
if (csr & I2C_SR_MAL) {
|
|
debug("%s: MAL\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if (!(csr & I2C_SR_MCF)) {
|
|
debug("%s: unfinished\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) {
|
|
debug("%s: No RXACK\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
} while ((get_ticks() - timeval) < timeout);
|
|
|
|
debug("%s: timed out\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
static int i2c_write_addr(const struct fsl_i2c_base *base, u8 dev,
|
|
u8 dir, int rsta)
|
|
{
|
|
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
|
|
| (rsta ? I2C_CR_RSTA : 0),
|
|
&base->cr);
|
|
|
|
writeb((dev << 1) | dir, &base->dr);
|
|
|
|
if (i2c_wait(base, I2C_WRITE_BIT) < 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int __i2c_write_data(const struct fsl_i2c_base *base, u8 *data,
|
|
int length)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
writeb(data[i], &base->dr);
|
|
|
|
if (i2c_wait(base, I2C_WRITE_BIT) < 0)
|
|
break;
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static int __i2c_read_data(const struct fsl_i2c_base *base, u8 *data,
|
|
int length)
|
|
{
|
|
int i;
|
|
|
|
writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
|
|
&base->cr);
|
|
|
|
/* dummy read */
|
|
readb(&base->dr);
|
|
|
|
for (i = 0; i < length; i++) {
|
|
if (i2c_wait(base, I2C_READ_BIT) < 0)
|
|
break;
|
|
|
|
/* Generate ack on last next to last byte */
|
|
if (i == length - 2)
|
|
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
|
|
&base->cr);
|
|
|
|
/* Do not generate stop on last byte */
|
|
if (i == length - 1)
|
|
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
|
|
&base->cr);
|
|
|
|
data[i] = readb(&base->dr);
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static int __i2c_read(const struct fsl_i2c_base *base, u8 chip_addr, u8 *offset,
|
|
int olen, u8 *data, int dlen)
|
|
{
|
|
int ret = -1; /* signal error */
|
|
|
|
if (i2c_wait4bus(base) < 0)
|
|
return -1;
|
|
|
|
/* Some drivers use offset lengths in excess of 4 bytes. These drivers
|
|
* adhere to the following convention:
|
|
* - the offset length is passed as negative (that is, the absolute
|
|
* value of olen is the actual offset length)
|
|
* - the offset itself is passed in data, which is overwritten by the
|
|
* subsequent read operation
|
|
*/
|
|
if (olen < 0) {
|
|
if (i2c_write_addr(base, chip_addr, I2C_WRITE_BIT, 0) != 0)
|
|
ret = __i2c_write_data(base, data, -olen);
|
|
|
|
if (ret != -olen)
|
|
return -1;
|
|
|
|
if (dlen && i2c_write_addr(base, chip_addr,
|
|
I2C_READ_BIT, 1) != 0)
|
|
ret = __i2c_read_data(base, data, dlen);
|
|
} else {
|
|
if ((!dlen || olen > 0) &&
|
|
i2c_write_addr(base, chip_addr, I2C_WRITE_BIT, 0) != 0 &&
|
|
__i2c_write_data(base, offset, olen) == olen)
|
|
ret = 0; /* No error so far */
|
|
|
|
if (dlen && i2c_write_addr(base, chip_addr, I2C_READ_BIT,
|
|
olen ? 1 : 0) != 0)
|
|
ret = __i2c_read_data(base, data, dlen);
|
|
}
|
|
|
|
writeb(I2C_CR_MEN, &base->cr);
|
|
|
|
if (i2c_wait4bus(base)) /* Wait until STOP */
|
|
debug("i2c_read: wait4bus timed out\n");
|
|
|
|
if (ret == dlen)
|
|
return 0;
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int __i2c_write(const struct fsl_i2c_base *base, u8 chip_addr,
|
|
u8 *offset, int olen, u8 *data, int dlen)
|
|
{
|
|
int ret = -1; /* signal error */
|
|
|
|
if (i2c_wait4bus(base) < 0)
|
|
return -1;
|
|
|
|
if (i2c_write_addr(base, chip_addr, I2C_WRITE_BIT, 0) != 0 &&
|
|
__i2c_write_data(base, offset, olen) == olen) {
|
|
ret = __i2c_write_data(base, data, dlen);
|
|
}
|
|
|
|
writeb(I2C_CR_MEN, &base->cr);
|
|
if (i2c_wait4bus(base)) /* Wait until STOP */
|
|
debug("i2c_write: wait4bus timed out\n");
|
|
|
|
if (ret == dlen)
|
|
return 0;
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int __i2c_probe_chip(const struct fsl_i2c_base *base, uchar chip)
|
|
{
|
|
/* For unknown reason the controller will ACK when
|
|
* probing for a slave with the same address, so skip
|
|
* it.
|
|
*/
|
|
if (chip == (readb(&base->adr) >> 1))
|
|
return -1;
|
|
|
|
return __i2c_read(base, chip, 0, 0, NULL, 0);
|
|
}
|
|
|
|
static uint __i2c_set_bus_speed(const struct fsl_i2c_base *base,
|
|
uint speed, int i2c_clk)
|
|
{
|
|
writeb(0, &base->cr); /* stop controller */
|
|
set_i2c_bus_speed(base, i2c_clk, speed);
|
|
writeb(I2C_CR_MEN, &base->cr); /* start controller */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_I2C
|
|
static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
|
|
{
|
|
__i2c_init(i2c_base[adap->hwadapnr], speed, slaveadd,
|
|
get_i2c_clock(adap->hwadapnr), adap->hwadapnr);
|
|
}
|
|
|
|
static int fsl_i2c_probe_chip(struct i2c_adapter *adap, uchar chip)
|
|
{
|
|
return __i2c_probe_chip(i2c_base[adap->hwadapnr], chip);
|
|
}
|
|
|
|
static int fsl_i2c_read(struct i2c_adapter *adap, u8 chip_addr, uint offset,
|
|
int olen, u8 *data, int dlen)
|
|
{
|
|
u8 *o = (u8 *)&offset;
|
|
|
|
return __i2c_read(i2c_base[adap->hwadapnr], chip_addr, &o[4 - olen],
|
|
olen, data, dlen);
|
|
}
|
|
|
|
static int fsl_i2c_write(struct i2c_adapter *adap, u8 chip_addr, uint offset,
|
|
int olen, u8 *data, int dlen)
|
|
{
|
|
u8 *o = (u8 *)&offset;
|
|
|
|
return __i2c_write(i2c_base[adap->hwadapnr], chip_addr, &o[4 - olen],
|
|
olen, data, dlen);
|
|
}
|
|
|
|
static uint fsl_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
|
|
{
|
|
return __i2c_set_bus_speed(i2c_base[adap->hwadapnr], speed,
|
|
get_i2c_clock(adap->hwadapnr));
|
|
}
|
|
|
|
/*
|
|
* Register fsl i2c adapters
|
|
*/
|
|
U_BOOT_I2C_ADAP_COMPLETE(fsl_0, fsl_i2c_init, fsl_i2c_probe_chip, fsl_i2c_read,
|
|
fsl_i2c_write, fsl_i2c_set_bus_speed,
|
|
CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE,
|
|
0)
|
|
#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
|
|
U_BOOT_I2C_ADAP_COMPLETE(fsl_1, fsl_i2c_init, fsl_i2c_probe_chip, fsl_i2c_read,
|
|
fsl_i2c_write, fsl_i2c_set_bus_speed,
|
|
CONFIG_SYS_FSL_I2C2_SPEED, CONFIG_SYS_FSL_I2C2_SLAVE,
|
|
1)
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_I2C3_OFFSET
|
|
U_BOOT_I2C_ADAP_COMPLETE(fsl_2, fsl_i2c_init, fsl_i2c_probe_chip, fsl_i2c_read,
|
|
fsl_i2c_write, fsl_i2c_set_bus_speed,
|
|
CONFIG_SYS_FSL_I2C3_SPEED, CONFIG_SYS_FSL_I2C3_SLAVE,
|
|
2)
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_I2C4_OFFSET
|
|
U_BOOT_I2C_ADAP_COMPLETE(fsl_3, fsl_i2c_init, fsl_i2c_probe_chip, fsl_i2c_read,
|
|
fsl_i2c_write, fsl_i2c_set_bus_speed,
|
|
CONFIG_SYS_FSL_I2C4_SPEED, CONFIG_SYS_FSL_I2C4_SLAVE,
|
|
3)
|
|
#endif
|
|
#else /* CONFIG_DM_I2C */
|
|
static int fsl_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
|
|
u32 chip_flags)
|
|
{
|
|
struct fsl_i2c_dev *dev = dev_get_priv(bus);
|
|
|
|
return __i2c_probe_chip(dev->base, chip_addr);
|
|
}
|
|
|
|
static int fsl_i2c_set_bus_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct fsl_i2c_dev *dev = dev_get_priv(bus);
|
|
|
|
return __i2c_set_bus_speed(dev->base, speed, dev->i2c_clk);
|
|
}
|
|
|
|
static int fsl_i2c_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct fsl_i2c_dev *dev = dev_get_priv(bus);
|
|
struct clk clock;
|
|
|
|
dev->base = map_sysmem(dev_read_addr(bus), sizeof(struct fsl_i2c_base));
|
|
|
|
if (!dev->base)
|
|
return -ENOMEM;
|
|
|
|
dev->index = dev_read_u32_default(bus, "cell-index", -1);
|
|
dev->slaveadd = dev_read_u32_default(bus, "u-boot,i2c-slave-addr",
|
|
0x7f);
|
|
dev->speed = dev_read_u32_default(bus, "clock-frequency", 400000);
|
|
|
|
if (!clk_get_by_index(bus, 0, &clock))
|
|
dev->i2c_clk = clk_get_rate(&clock);
|
|
else
|
|
dev->i2c_clk = dev->index ? gd->arch.i2c2_clk :
|
|
gd->arch.i2c1_clk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_i2c_probe(struct udevice *bus)
|
|
{
|
|
struct fsl_i2c_dev *dev = dev_get_priv(bus);
|
|
|
|
__i2c_init(dev->base, dev->speed, dev->slaveadd, dev->i2c_clk,
|
|
dev->index);
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct fsl_i2c_dev *dev = dev_get_priv(bus);
|
|
struct i2c_msg *dmsg, *omsg, dummy;
|
|
|
|
memset(&dummy, 0, sizeof(struct i2c_msg));
|
|
|
|
/* We expect either two messages (one with an offset and one with the
|
|
* actual data) or one message (just data)
|
|
*/
|
|
if (nmsgs > 2 || nmsgs == 0) {
|
|
debug("%s: Only one or two messages are supported.", __func__);
|
|
return -1;
|
|
}
|
|
|
|
omsg = nmsgs == 1 ? &dummy : msg;
|
|
dmsg = nmsgs == 1 ? msg : msg + 1;
|
|
|
|
if (dmsg->flags & I2C_M_RD)
|
|
return __i2c_read(dev->base, dmsg->addr, omsg->buf, omsg->len,
|
|
dmsg->buf, dmsg->len);
|
|
else
|
|
return __i2c_write(dev->base, dmsg->addr, omsg->buf, omsg->len,
|
|
dmsg->buf, dmsg->len);
|
|
}
|
|
|
|
static const struct dm_i2c_ops fsl_i2c_ops = {
|
|
.xfer = fsl_i2c_xfer,
|
|
.probe_chip = fsl_i2c_probe_chip,
|
|
.set_bus_speed = fsl_i2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id fsl_i2c_ids[] = {
|
|
{ .compatible = "fsl-i2c", },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_fsl) = {
|
|
.name = "i2c_fsl",
|
|
.id = UCLASS_I2C,
|
|
.of_match = fsl_i2c_ids,
|
|
.probe = fsl_i2c_probe,
|
|
.ofdata_to_platdata = fsl_i2c_ofdata_to_platdata,
|
|
.priv_auto_alloc_size = sizeof(struct fsl_i2c_dev),
|
|
.ops = &fsl_i2c_ops,
|
|
};
|
|
|
|
#endif /* CONFIG_DM_I2C */
|