u-boot/board/nvidia/whistler/whistler.c
Masahiro Yamada 1d2c0506d3 mmc: move more driver config options to Kconfig
Move (and rename) the following CONFIG options to Kconfig:

  CONFIG_DAVINCI_MMC  (renamed to CONFIG_MMC_DAVINCI)
  CONFIG_OMAP_HSMMC   (renamed to CONFIG_MMC_OMAP_HS)
  CONFIG_MXC_MMC      (renamed to CONFIG_MMC_MXC)
  CONFIG_MXS_MMC      (renamed to CONFIG_MMC_MXS)
  CONFIG_TEGRA_MMC    (renamed to CONFIG_MMC_SDHCI_TEGRA)
  CONFIG_SUNXI_MMC    (renamed to CONFIG_MMC_SUNXI)

They are the same option names as used in Linux.

This commit was created as follows:

[1] Rename the options with the following command:

find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g
s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g
s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g
s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g
s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g
s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g
'

[2] Commit the changes

[3] Create entries in driver/mmc/Kconfig.
    (copied from Linux)

[4] Move the options with the following command
tools/moveconfig.py -y -r HEAD \
MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI

[5] Sort and align drivers/mmc/Makefile for readability

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-11 19:40:15 +09:00

80 lines
1.9 KiB
C

/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/arch/tegra.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
#include <asm/gpio.h>
#include <i2c.h>
#ifdef CONFIG_MMC_SDHCI_TEGRA
/*
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
void pin_mux_mmc(void)
{
struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
ret = i2c_get_chip_for_busnum(0, 0x3c, 1, &dev);
if (ret) {
printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
return;
}
val = 0x29;
ret = dm_i2c_write(dev, 0x46, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
val = 0x00;
ret = dm_i2c_write(dev, 0x45, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
val = 0x1f;
ret = dm_i2c_write(dev, 0x44, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
}
#endif
/* this is a weak define that we are overriding */
void pin_mux_usb(void)
{
struct udevice *dev;
uchar val;
int ret;
/*
* This is a hack. This should be represented in DT using the
* vbus-gpio property. However, U-Boot's DT support doesn't
* support any GPIO controller other than the Tegra's yet.
*/
/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
ret = i2c_get_chip_for_busnum(0, 0x20, 1, &dev);
if (ret) {
printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
return;
}
val = 0x03;
ret = dm_i2c_write(dev, 2, &val, 1);
if (ret)
printf("i2c_write 0 0x20 2 failed: %d\n", ret);
val = 0xfc;
ret = dm_i2c_write(dev, 6, &val, 1);
if (ret)
printf("i2c_write 0 0x20 6 failed: %d\n", ret);
}