u-boot/include/configs/beaver.h
Stephen Warren 39446bcefa ARM: tegra: enable DFU too
Enable DFU protocol support (via the "dfu" command) on Tegra boards where
USB device/gadget mode is enabled.

Note that for DFU to operate correctly on Tegra, we still need some DFU
fixes/enhancements that are going through the DFU -> USB trees. However,
the code builds just fine without those changes, and applying this patch
now will allow both sets of patches to meet in the main U-Boot tree much
more quickly.

In order to run test/dfu/dfu_gadget_test.sh, you would need to add the
following to the board configuration:

CONFIG_EXT4_WRITE
CONFIG_CMD_EXT4_WRITE

However, I haven't enabled those here, since I believe the main use-case
for DFU on Tegra is raw flash writing, rather than filesystem access, so
we don't need the additional code-size hit. However, I could be persuaded
otherwise! We should probably add a separate test script for raw flash
access.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-08-18 16:57:03 -07:00

94 lines
2.6 KiB
C

/*
* Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <linux/sizes.h>
#include "tegra30-common.h"
/* VDD core PMIC */
#define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1
/* Enable fdt support for Beaver. Flash the image in u-boot-dtb.bin */
#define CONFIG_DEFAULT_DEVICE_TREE tegra30-beaver
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
#define V_PROMPT "Tegra30 (Beaver) # "
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Beaver"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define MACH_TYPE_BEAVER 4597 /* not yet in mach-types.h */
#define CONFIG_MACH_TYPE MACH_TYPE_BEAVER
#define CONFIG_BOARD_EARLY_INIT_F
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 2
/* SPI */
#define CONFIG_TEGRA20_SLINK
#define CONFIG_TEGRA_SLINK_CTRLS 6
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 24000000
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */