mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
54bcd84adf
Currently all GPIOs supported by CMD_EXT_CONTROL/CMD_GET_EXT_CONTROL_STATUS
commands (last 16 GPIOs) are available only when FEAT_PERIPH_MCU feature
bit is set. So do not register these GPIOs by U-Boot driver when this
feature bit is not set, so U-Boot 'gpio' command would see only GPIOs which
really exists.
Fixes: 5e4d24ccc1
("gpio: Add Turris Omnia MCU driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
316 lines
7.7 KiB
C
316 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
// (C) 2022 Pali Rohár <pali@kernel.org>
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/log2.h>
|
|
|
|
enum commands_e {
|
|
CMD_GET_STATUS_WORD = 0x01,
|
|
CMD_GENERAL_CONTROL = 0x02,
|
|
|
|
/* available if STS_FEATURES_SUPPORTED bit set in status word */
|
|
CMD_GET_FEATURES = 0x10,
|
|
|
|
/* available if FEAT_EXT_CMDS bit is set in features */
|
|
CMD_GET_EXT_STATUS_DWORD = 0x11,
|
|
|
|
/* available if FEAT_EXT_CMDS and FEAT_PERIPH_MCU bits are set in featurs */
|
|
CMD_EXT_CONTROL = 0x12,
|
|
CMD_GET_EXT_CONTROL_STATUS = 0x13,
|
|
};
|
|
|
|
/* CMD_GET_STATUS_WORD */
|
|
enum sts_word_e {
|
|
STS_MCU_TYPE_MASK = GENMASK(1, 0),
|
|
STS_MCU_TYPE_STM32 = 0,
|
|
STS_MCU_TYPE_GD32 = 1,
|
|
STS_MCU_TYPE_MKL = 2,
|
|
STS_FEATURES_SUPPORTED = BIT(2),
|
|
STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3),
|
|
STS_CARD_DET = BIT(4),
|
|
STS_MSATA_IND = BIT(5),
|
|
STS_USB30_OVC = BIT(6),
|
|
STS_USB31_OVC = BIT(7),
|
|
STS_USB30_PWRON = BIT(8),
|
|
STS_USB31_PWRON = BIT(9),
|
|
STS_ENABLE_4V5 = BIT(10),
|
|
STS_BUTTON_MODE = BIT(11),
|
|
STS_BUTTON_PRESSED = BIT(12),
|
|
STS_BUTTON_COUNTER_MASK = GENMASK(15, 13)
|
|
};
|
|
|
|
/* CMD_GENERAL_CONTROL */
|
|
enum ctl_byte_e {
|
|
CTL_LIGHT_RST = BIT(0),
|
|
CTL_HARD_RST = BIT(1),
|
|
/*CTL_RESERVED = BIT(2),*/
|
|
CTL_USB30_PWRON = BIT(3),
|
|
CTL_USB31_PWRON = BIT(4),
|
|
CTL_ENABLE_4V5 = BIT(5),
|
|
CTL_BUTTON_MODE = BIT(6),
|
|
CTL_BOOTLOADER = BIT(7)
|
|
};
|
|
|
|
/* CMD_GET_FEATURES */
|
|
enum features_e {
|
|
FEAT_PERIPH_MCU = BIT(0),
|
|
FEAT_EXT_CMDS = BIT(1),
|
|
};
|
|
|
|
struct turris_omnia_mcu_info {
|
|
u16 features;
|
|
};
|
|
|
|
static int turris_omnia_mcu_get_function(struct udevice *dev, uint offset)
|
|
{
|
|
struct turris_omnia_mcu_info *info = dev_get_plat(dev);
|
|
|
|
switch (offset) {
|
|
/* bank 0 */
|
|
case 0 ... 15:
|
|
switch (offset) {
|
|
case ilog2(STS_USB30_PWRON):
|
|
case ilog2(STS_USB31_PWRON):
|
|
case ilog2(STS_ENABLE_4V5):
|
|
case ilog2(STS_BUTTON_MODE):
|
|
return GPIOF_OUTPUT;
|
|
default:
|
|
return GPIOF_INPUT;
|
|
}
|
|
|
|
/* bank 1 - supported only when FEAT_EXT_CMDS is set */
|
|
case (16 + 0) ... (16 + 31):
|
|
if (!(info->features & FEAT_EXT_CMDS))
|
|
return -EINVAL;
|
|
return GPIOF_INPUT;
|
|
|
|
/* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
|
|
case (16 + 32 + 0) ... (16 + 32 + 15):
|
|
if (!(info->features & FEAT_EXT_CMDS))
|
|
return -EINVAL;
|
|
if (!(info->features & FEAT_PERIPH_MCU))
|
|
return -EINVAL;
|
|
return GPIOF_OUTPUT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int turris_omnia_mcu_get_value(struct udevice *dev, uint offset)
|
|
{
|
|
struct turris_omnia_mcu_info *info = dev_get_plat(dev);
|
|
u8 val16[2];
|
|
u8 val32[4];
|
|
int ret;
|
|
|
|
switch (offset) {
|
|
/* bank 0 */
|
|
case 0 ... 15:
|
|
ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val16, 2);
|
|
if (ret)
|
|
return ret;
|
|
return ((((u16)val16[1] << 8) | val16[0]) >> offset) & 0x1;
|
|
|
|
/* bank 1 - supported only when FEAT_EXT_CMDS is set */
|
|
case (16 + 0) ... (16 + 31):
|
|
if (!(info->features & FEAT_EXT_CMDS))
|
|
return -EINVAL;
|
|
ret = dm_i2c_read(dev, CMD_GET_EXT_STATUS_DWORD, val32, 4);
|
|
if (ret)
|
|
return ret;
|
|
return ((((u32)val32[3] << 24) | ((u32)val32[2] << 16) |
|
|
((u32)val32[1] << 8) | val32[0]) >> (offset - 16)) & 0x1;
|
|
|
|
/* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
|
|
case (16 + 32 + 0) ... (16 + 32 + 15):
|
|
if (!(info->features & FEAT_EXT_CMDS))
|
|
return -EINVAL;
|
|
if (!(info->features & FEAT_PERIPH_MCU))
|
|
return -EINVAL;
|
|
ret = dm_i2c_read(dev, CMD_GET_EXT_CONTROL_STATUS, val16, 2);
|
|
if (ret)
|
|
return ret;
|
|
return ((((u16)val16[1] << 8) | val16[0]) >> (offset - 16 - 32)) & 0x1;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int turris_omnia_mcu_set_value(struct udevice *dev, uint offset, int value)
|
|
{
|
|
struct turris_omnia_mcu_info *info = dev_get_plat(dev);
|
|
u8 val16[2];
|
|
u8 val32[4];
|
|
|
|
switch (offset) {
|
|
/* bank 0 */
|
|
case 0 ... 15:
|
|
switch (offset) {
|
|
case ilog2(STS_USB30_PWRON):
|
|
val16[1] = CTL_USB30_PWRON;
|
|
break;
|
|
case ilog2(STS_USB31_PWRON):
|
|
val16[1] = CTL_USB31_PWRON;
|
|
break;
|
|
case ilog2(STS_ENABLE_4V5):
|
|
val16[1] = CTL_ENABLE_4V5;
|
|
break;
|
|
case ilog2(STS_BUTTON_MODE):
|
|
val16[1] = CTL_BUTTON_MODE;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
val16[0] = value ? val16[1] : 0;
|
|
return dm_i2c_write(dev, CMD_GENERAL_CONTROL, val16, sizeof(val16));
|
|
|
|
/* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */
|
|
case (16 + 32 + 0) ... (16 + 32 + 15):
|
|
if (!(info->features & FEAT_EXT_CMDS))
|
|
return -EINVAL;
|
|
if (!(info->features & FEAT_PERIPH_MCU))
|
|
return -EINVAL;
|
|
val32[3] = BIT(offset - 16 - 32) >> 8;
|
|
val32[2] = BIT(offset - 16 - 32) & 0xff;
|
|
val32[1] = value ? val32[3] : 0;
|
|
val32[0] = value ? val32[2] : 0;
|
|
return dm_i2c_write(dev, CMD_EXT_CONTROL, val32, sizeof(val32));
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int turris_omnia_mcu_direction_input(struct udevice *dev, uint offset)
|
|
{
|
|
int ret;
|
|
|
|
ret = turris_omnia_mcu_get_function(dev, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
else if (ret != GPIOF_INPUT)
|
|
return -EOPNOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int turris_omnia_mcu_direction_output(struct udevice *dev, uint offset, int value)
|
|
{
|
|
int ret;
|
|
|
|
ret = turris_omnia_mcu_get_function(dev, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
else if (ret != GPIOF_OUTPUT)
|
|
return -EOPNOTSUPP;
|
|
|
|
return turris_omnia_mcu_set_value(dev, offset, value);
|
|
}
|
|
|
|
static int turris_omnia_mcu_xlate(struct udevice *dev, struct gpio_desc *desc,
|
|
struct ofnode_phandle_args *args)
|
|
{
|
|
uint bank, gpio, flags, offset;
|
|
int ret;
|
|
|
|
if (args->args_count != 3)
|
|
return -EINVAL;
|
|
|
|
bank = args->args[0];
|
|
gpio = args->args[1];
|
|
flags = args->args[2];
|
|
|
|
switch (bank) {
|
|
case 0:
|
|
if (gpio >= 16)
|
|
return -EINVAL;
|
|
offset = gpio;
|
|
break;
|
|
case 1:
|
|
if (gpio >= 32)
|
|
return -EINVAL;
|
|
offset = 16 + gpio;
|
|
break;
|
|
case 2:
|
|
if (gpio >= 16)
|
|
return -EINVAL;
|
|
offset = 16 + 32 + gpio;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = turris_omnia_mcu_get_function(dev, offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
desc->offset = offset;
|
|
desc->flags = gpio_flags_xlate(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_gpio_ops turris_omnia_mcu_ops = {
|
|
.direction_input = turris_omnia_mcu_direction_input,
|
|
.direction_output = turris_omnia_mcu_direction_output,
|
|
.get_value = turris_omnia_mcu_get_value,
|
|
.set_value = turris_omnia_mcu_set_value,
|
|
.get_function = turris_omnia_mcu_get_function,
|
|
.xlate = turris_omnia_mcu_xlate,
|
|
};
|
|
|
|
static int turris_omnia_mcu_probe(struct udevice *dev)
|
|
{
|
|
struct turris_omnia_mcu_info *info = dev_get_plat(dev);
|
|
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
u16 status;
|
|
u8 val[2];
|
|
int ret;
|
|
|
|
ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val, 2);
|
|
if (ret) {
|
|
printf("Error: turris_omnia_mcu CMD_GET_STATUS_WORD failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
status = ((u16)val[1] << 8) | val[0];
|
|
|
|
if (status & STS_FEATURES_SUPPORTED) {
|
|
ret = dm_i2c_read(dev, CMD_GET_FEATURES, val, 2);
|
|
if (ret) {
|
|
printf("Error: turris_omnia_mcu CMD_GET_FEATURES failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
info->features = ((u16)val[1] << 8) | val[0];
|
|
}
|
|
|
|
uc_priv->bank_name = "mcu_";
|
|
|
|
if ((info->features & FEAT_EXT_CMDS) && (info->features & FEAT_PERIPH_MCU))
|
|
uc_priv->gpio_count = 16 + 32 + 16;
|
|
else if (info->features & FEAT_EXT_CMDS)
|
|
uc_priv->gpio_count = 16 + 32;
|
|
else
|
|
uc_priv->gpio_count = 16;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id turris_omnia_mcu_ids[] = {
|
|
{ .compatible = "cznic,turris-omnia-mcu" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(turris_omnia_mcu) = {
|
|
.name = "turris-omnia-mcu",
|
|
.id = UCLASS_GPIO,
|
|
.ops = &turris_omnia_mcu_ops,
|
|
.probe = turris_omnia_mcu_probe,
|
|
.plat_auto = sizeof(struct turris_omnia_mcu_info),
|
|
.of_match = turris_omnia_mcu_ids,
|
|
};
|