mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
3e1b61de58
Updating year in zynq files. Also add missing Copyright to board.c. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
200 lines
4 KiB
C
200 lines
4 KiB
C
/*
|
|
* Copyright (c) 2013 - 2017 Xilinx Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <malloc.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#define SLCR_LOCK_MAGIC 0x767B
|
|
#define SLCR_UNLOCK_MAGIC 0xDF0D
|
|
|
|
#define SLCR_NAND_L2_SEL 0x10
|
|
#define SLCR_NAND_L2_SEL_MASK 0x1F
|
|
|
|
#define SLCR_USB_L1_SEL 0x04
|
|
|
|
#define SLCR_IDCODE_MASK 0x1F000
|
|
#define SLCR_IDCODE_SHIFT 12
|
|
|
|
/*
|
|
* zynq_slcr_mio_get_status - Get the status of MIO peripheral.
|
|
*
|
|
* @peri_name: Name of the peripheral for checking MIO status
|
|
* @get_pins: Pointer to array of get pin for this peripheral
|
|
* @num_pins: Number of pins for this peripheral
|
|
* @mask: Mask value
|
|
* @check_val: Required check value to get the status of periph
|
|
*/
|
|
struct zynq_slcr_mio_get_status {
|
|
const char *peri_name;
|
|
const int *get_pins;
|
|
int num_pins;
|
|
u32 mask;
|
|
u32 check_val;
|
|
};
|
|
|
|
static const int nand8_pins[] = {
|
|
0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
|
|
};
|
|
|
|
static const int nand16_pins[] = {
|
|
16, 17, 18, 19, 20, 21, 22, 23
|
|
};
|
|
|
|
static const int usb0_pins[] = {
|
|
28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
|
|
};
|
|
|
|
static const int usb1_pins[] = {
|
|
40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51
|
|
};
|
|
|
|
static const struct zynq_slcr_mio_get_status mio_periphs[] = {
|
|
{
|
|
"nand8",
|
|
nand8_pins,
|
|
ARRAY_SIZE(nand8_pins),
|
|
SLCR_NAND_L2_SEL_MASK,
|
|
SLCR_NAND_L2_SEL,
|
|
},
|
|
{
|
|
"nand16",
|
|
nand16_pins,
|
|
ARRAY_SIZE(nand16_pins),
|
|
SLCR_NAND_L2_SEL_MASK,
|
|
SLCR_NAND_L2_SEL,
|
|
},
|
|
{
|
|
"usb0",
|
|
usb0_pins,
|
|
ARRAY_SIZE(usb0_pins),
|
|
SLCR_USB_L1_SEL,
|
|
SLCR_USB_L1_SEL,
|
|
},
|
|
{
|
|
"usb1",
|
|
usb1_pins,
|
|
ARRAY_SIZE(usb1_pins),
|
|
SLCR_USB_L1_SEL,
|
|
SLCR_USB_L1_SEL,
|
|
},
|
|
};
|
|
|
|
static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
|
|
|
|
void zynq_slcr_lock(void)
|
|
{
|
|
if (!slcr_lock) {
|
|
writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
|
|
slcr_lock = 1;
|
|
}
|
|
}
|
|
|
|
void zynq_slcr_unlock(void)
|
|
{
|
|
if (slcr_lock) {
|
|
writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
|
|
slcr_lock = 0;
|
|
}
|
|
}
|
|
|
|
/* Reset the entire system */
|
|
void zynq_slcr_cpu_reset(void)
|
|
{
|
|
/*
|
|
* Unlock the SLCR then reset the system.
|
|
* Note that this seems to require raw i/o
|
|
* functions or there's a lockup?
|
|
*/
|
|
zynq_slcr_unlock();
|
|
|
|
/*
|
|
* Clear 0x0F000000 bits of reboot status register to workaround
|
|
* the FSBL not loading the bitstream after soft-reboot
|
|
* This is a temporary solution until we know more.
|
|
*/
|
|
clrbits_le32(&slcr_base->reboot_status, 0xF000000);
|
|
|
|
writel(1, &slcr_base->pss_rst_ctrl);
|
|
}
|
|
|
|
void zynq_slcr_devcfg_disable(void)
|
|
{
|
|
u32 reg_val;
|
|
|
|
zynq_slcr_unlock();
|
|
|
|
/* Disable AXI interface by asserting FPGA resets */
|
|
writel(0xF, &slcr_base->fpga_rst_ctrl);
|
|
|
|
/* Disable Level shifters before setting PS-PL */
|
|
reg_val = readl(&slcr_base->lvl_shftr_en);
|
|
reg_val &= ~0xF;
|
|
writel(reg_val, &slcr_base->lvl_shftr_en);
|
|
|
|
/* Set Level Shifters DT618760 */
|
|
writel(0xA, &slcr_base->lvl_shftr_en);
|
|
|
|
zynq_slcr_lock();
|
|
}
|
|
|
|
void zynq_slcr_devcfg_enable(void)
|
|
{
|
|
zynq_slcr_unlock();
|
|
|
|
/* Set Level Shifters DT618760 */
|
|
writel(0xF, &slcr_base->lvl_shftr_en);
|
|
|
|
/* Enable AXI interface by de-asserting FPGA resets */
|
|
writel(0x0, &slcr_base->fpga_rst_ctrl);
|
|
|
|
zynq_slcr_lock();
|
|
}
|
|
|
|
u32 zynq_slcr_get_boot_mode(void)
|
|
{
|
|
/* Get the bootmode register value */
|
|
return readl(&slcr_base->boot_mode);
|
|
}
|
|
|
|
u32 zynq_slcr_get_idcode(void)
|
|
{
|
|
return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
|
|
SLCR_IDCODE_SHIFT;
|
|
}
|
|
|
|
/*
|
|
* zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
|
|
*
|
|
* @periph: Name of the peripheral
|
|
*
|
|
* Returns count to indicate the number of pins configured for the
|
|
* given @periph.
|
|
*/
|
|
int zynq_slcr_get_mio_pin_status(const char *periph)
|
|
{
|
|
const struct zynq_slcr_mio_get_status *mio_ptr;
|
|
int val, j;
|
|
int mio = 0;
|
|
u32 i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
|
|
if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
|
|
mio_ptr = &mio_periphs[i];
|
|
for (j = 0; j < mio_ptr->num_pins; j++) {
|
|
val = readl(&slcr_base->mio_pin
|
|
[mio_ptr->get_pins[j]]);
|
|
if ((val & mio_ptr->mask) == mio_ptr->check_val)
|
|
mio++;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
return mio;
|
|
}
|