mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
244 lines
7.4 KiB
C
244 lines
7.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2001
|
|
* Denis Peter, MPL AG Switzerland
|
|
*/
|
|
#ifndef _SCSI_H
|
|
#define _SCSI_H
|
|
|
|
struct scsi_cmd {
|
|
unsigned char cmd[16]; /* command */
|
|
/* for request sense */
|
|
unsigned char sense_buf[64]
|
|
__attribute__((aligned(ARCH_DMA_MINALIGN)));
|
|
unsigned char status; /* SCSI Status */
|
|
unsigned char target; /* Target ID */
|
|
unsigned char lun; /* Target LUN */
|
|
unsigned char cmdlen; /* command len */
|
|
unsigned long datalen; /* Total data length */
|
|
unsigned char * pdata; /* pointer to data */
|
|
unsigned char msgout[12]; /* Messge out buffer (NOT USED) */
|
|
unsigned char msgin[12]; /* Message in buffer */
|
|
unsigned char sensecmdlen; /* Sense command len */
|
|
unsigned long sensedatalen; /* Sense data len */
|
|
unsigned char sensecmd[6]; /* Sense command */
|
|
unsigned long contr_stat; /* Controller Status */
|
|
unsigned long trans_bytes; /* tranfered bytes */
|
|
|
|
unsigned int priv;
|
|
};
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** SCSI constants.
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
** Messages
|
|
*/
|
|
|
|
#define M_COMPLETE (0x00)
|
|
#define M_EXTENDED (0x01)
|
|
#define M_SAVE_DP (0x02)
|
|
#define M_RESTORE_DP (0x03)
|
|
#define M_DISCONNECT (0x04)
|
|
#define M_ID_ERROR (0x05)
|
|
#define M_ABORT (0x06)
|
|
#define M_REJECT (0x07)
|
|
#define M_NOOP (0x08)
|
|
#define M_PARITY (0x09)
|
|
#define M_LCOMPLETE (0x0a)
|
|
#define M_FCOMPLETE (0x0b)
|
|
#define M_RESET (0x0c)
|
|
#define M_ABORT_TAG (0x0d)
|
|
#define M_CLEAR_QUEUE (0x0e)
|
|
#define M_INIT_REC (0x0f)
|
|
#define M_REL_REC (0x10)
|
|
#define M_TERMINATE (0x11)
|
|
#define M_SIMPLE_TAG (0x20)
|
|
#define M_HEAD_TAG (0x21)
|
|
#define M_ORDERED_TAG (0x22)
|
|
#define M_IGN_RESIDUE (0x23)
|
|
#define M_IDENTIFY (0x80)
|
|
|
|
#define M_X_MODIFY_DP (0x00)
|
|
#define M_X_SYNC_REQ (0x01)
|
|
#define M_X_WIDE_REQ (0x03)
|
|
#define M_X_PPR_REQ (0x04)
|
|
|
|
|
|
/*
|
|
** Status
|
|
*/
|
|
|
|
#define S_GOOD (0x00)
|
|
#define S_CHECK_COND (0x02)
|
|
#define S_COND_MET (0x04)
|
|
#define S_BUSY (0x08)
|
|
#define S_INT (0x10)
|
|
#define S_INT_COND_MET (0x14)
|
|
#define S_CONFLICT (0x18)
|
|
#define S_TERMINATED (0x20)
|
|
#define S_QUEUE_FULL (0x28)
|
|
#define S_ILLEGAL (0xff)
|
|
#define S_SENSE (0x80)
|
|
|
|
/*
|
|
* Sense_keys
|
|
*/
|
|
|
|
#define SENSE_NO_SENSE 0x0
|
|
#define SENSE_RECOVERED_ERROR 0x1
|
|
#define SENSE_NOT_READY 0x2
|
|
#define SENSE_MEDIUM_ERROR 0x3
|
|
#define SENSE_HARDWARE_ERROR 0x4
|
|
#define SENSE_ILLEGAL_REQUEST 0x5
|
|
#define SENSE_UNIT_ATTENTION 0x6
|
|
#define SENSE_DATA_PROTECT 0x7
|
|
#define SENSE_BLANK_CHECK 0x8
|
|
#define SENSE_VENDOR_SPECIFIC 0x9
|
|
#define SENSE_COPY_ABORTED 0xA
|
|
#define SENSE_ABORTED_COMMAND 0xB
|
|
#define SENSE_VOLUME_OVERFLOW 0xD
|
|
#define SENSE_MISCOMPARE 0xE
|
|
|
|
|
|
#define SCSI_CHANGE_DEF 0x40 /* Change Definition (Optional) */
|
|
#define SCSI_COMPARE 0x39 /* Compare (O) */
|
|
#define SCSI_COPY 0x18 /* Copy (O) */
|
|
#define SCSI_COP_VERIFY 0x3A /* Copy and Verify (O) */
|
|
#define SCSI_INQUIRY 0x12 /* Inquiry (MANDATORY) */
|
|
#define SCSI_LOG_SELECT 0x4C /* Log Select (O) */
|
|
#define SCSI_LOG_SENSE 0x4D /* Log Sense (O) */
|
|
#define SCSI_MODE_SEL6 0x15 /* Mode Select 6-byte (Device Specific) */
|
|
#define SCSI_MODE_SEL10 0x55 /* Mode Select 10-byte (Device Specific) */
|
|
#define SCSI_MODE_SEN6 0x1A /* Mode Sense 6-byte (Device Specific) */
|
|
#define SCSI_MODE_SEN10 0x5A /* Mode Sense 10-byte (Device Specific) */
|
|
#define SCSI_READ_BUFF 0x3C /* Read Buffer (O) */
|
|
#define SCSI_REQ_SENSE 0x03 /* Request Sense (MANDATORY) */
|
|
#define SCSI_SEND_DIAG 0x1D /* Send Diagnostic (O) */
|
|
#define SCSI_TST_U_RDY 0x00 /* Test Unit Ready (MANDATORY) */
|
|
#define SCSI_WRITE_BUFF 0x3B /* Write Buffer (O) */
|
|
/***************************************************************************
|
|
* %%% Commands Unique to Direct Access Devices %%%
|
|
***************************************************************************/
|
|
#define SCSI_COMPARE 0x39 /* Compare (O) */
|
|
#define SCSI_FORMAT 0x04 /* Format Unit (MANDATORY) */
|
|
#define SCSI_LCK_UN_CAC 0x36 /* Lock Unlock Cache (O) */
|
|
#define SCSI_PREFETCH 0x34 /* Prefetch (O) */
|
|
#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */
|
|
#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
|
|
#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
|
|
#define SCSI_READ16 0x48
|
|
#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
|
|
#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
|
|
#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */
|
|
#define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */
|
|
#define SCSI_READ_LONG 0x3E /* Read Long (O) */
|
|
#define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */
|
|
#define SCSI_RCV_DIAG 0x1C /* Receive Diagnostic Results (O) */
|
|
#define SCSI_RELEASE 0x17 /* Release Unit (MANDATORY) */
|
|
#define SCSI_REZERO 0x01 /* Rezero Unit (O) */
|
|
#define SCSI_SRCH_DAT_E 0x31 /* Search Data Equal (O) */
|
|
#define SCSI_SRCH_DAT_H 0x30 /* Search Data High (O) */
|
|
#define SCSI_SRCH_DAT_L 0x32 /* Search Data Low (O) */
|
|
#define SCSI_SEEK6 0x0B /* Seek 6-Byte (O) */
|
|
#define SCSI_SEEK10 0x2B /* Seek 10-Byte (O) */
|
|
#define SCSI_SEND_DIAG 0x1D /* Send Diagnostics (MANDATORY) */
|
|
#define SCSI_SET_LIMIT 0x33 /* Set Limits (O) */
|
|
#define SCSI_START_STP 0x1B /* Start/Stop Unit (O) */
|
|
#define SCSI_SYNC_CACHE 0x35 /* Synchronize Cache (O) */
|
|
#define SCSI_VERIFY 0x2F /* Verify (O) */
|
|
#define SCSI_WRITE6 0x0A /* Write 6-Byte (MANDATORY) */
|
|
#define SCSI_WRITE10 0x2A /* Write 10-Byte (MANDATORY) */
|
|
#define SCSI_WRT_VERIFY 0x2E /* Write and Verify (O) */
|
|
#define SCSI_WRITE_LONG 0x3F /* Write Long (O) */
|
|
#define SCSI_WRITE_SAME 0x41 /* Write Same (O) */
|
|
|
|
/**
|
|
* struct scsi_platdata - stores information about SCSI controller
|
|
*
|
|
* @base: Controller base address
|
|
* @max_lun: Maximum number of logical units
|
|
* @max_id: Maximum number of target ids
|
|
*/
|
|
struct scsi_platdata {
|
|
unsigned long base;
|
|
unsigned long max_lun;
|
|
unsigned long max_id;
|
|
};
|
|
|
|
/* Operations for SCSI */
|
|
struct scsi_ops {
|
|
/**
|
|
* exec() - execute a command
|
|
*
|
|
* @dev: SCSI bus
|
|
* @cmd: Command to execute
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*exec)(struct udevice *dev, struct scsi_cmd *cmd);
|
|
|
|
/**
|
|
* bus_reset() - reset the bus
|
|
*
|
|
* @dev: SCSI bus to reset
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int (*bus_reset)(struct udevice *dev);
|
|
};
|
|
|
|
#define scsi_get_ops(dev) ((struct scsi_ops *)(dev)->driver->ops)
|
|
|
|
extern struct scsi_ops scsi_ops;
|
|
|
|
/**
|
|
* scsi_exec() - execute a command
|
|
*
|
|
* @dev: SCSI bus
|
|
* @cmd: Command to execute
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int scsi_exec(struct udevice *dev, struct scsi_cmd *cmd);
|
|
|
|
/**
|
|
* scsi_bus_reset() - reset the bus
|
|
*
|
|
* @dev: SCSI bus to reset
|
|
* @return 0 if OK, -ve on error
|
|
*/
|
|
int scsi_bus_reset(struct udevice *dev);
|
|
|
|
/**
|
|
* scsi_scan() - Scan all SCSI controllers for available devices
|
|
*
|
|
* @vebose: true to show information about each device found
|
|
*/
|
|
int scsi_scan(bool verbose);
|
|
|
|
/**
|
|
* scsi_scan_dev() - scan a SCSI bus and create devices
|
|
*
|
|
* @dev: SCSI bus
|
|
* @verbose: true to show information about each device found
|
|
*/
|
|
int scsi_scan_dev(struct udevice *dev, bool verbose);
|
|
|
|
#ifndef CONFIG_DM_SCSI
|
|
void scsi_low_level_init(int busdevfunc);
|
|
void scsi_init(void);
|
|
#endif
|
|
|
|
#define SCSI_IDENTIFY 0xC0 /* not used */
|
|
|
|
/* Hardware errors */
|
|
#define SCSI_SEL_TIME_OUT 0x00000101 /* Selection time out */
|
|
#define SCSI_HNS_TIME_OUT 0x00000102 /* Handshake */
|
|
#define SCSI_MA_TIME_OUT 0x00000103 /* Phase error */
|
|
#define SCSI_UNEXP_DIS 0x00000104 /* unexpected disconnect */
|
|
|
|
#define SCSI_INT_STATE 0x00010000 /* unknown Interrupt number is stored in 16 LSB */
|
|
|
|
#endif /* _SCSI_H */
|