mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
298 lines
9 KiB
C
298 lines
9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Porting to U-Boot:
|
|
*
|
|
* (C) Copyright 2010
|
|
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
|
|
*
|
|
* Lattice's ispVME Embedded Tool to load Lattice's FPGA:
|
|
*
|
|
* Lattice Semiconductor Corp. Copyright 2009
|
|
*/
|
|
|
|
#ifndef _VME_OPCODE_H
|
|
#define _VME_OPCODE_H
|
|
|
|
#define VME_VERSION_NUMBER "12.1"
|
|
|
|
/* Maximum declarations. */
|
|
|
|
#define VMEHEXMAX 60000L /* The hex file is split 60K per file. */
|
|
#define SCANMAX 64000L /* The maximum SDR/SIR burst. */
|
|
|
|
/*
|
|
*
|
|
* Supported JTAG state transitions.
|
|
*
|
|
*/
|
|
|
|
#define RESET 0x00
|
|
#define IDLE 0x01
|
|
#define IRPAUSE 0x02
|
|
#define DRPAUSE 0x03
|
|
#define SHIFTIR 0x04
|
|
#define SHIFTDR 0x05
|
|
/* 11/15/05 Nguyen changed to support DRCAPTURE*/
|
|
#define DRCAPTURE 0x06
|
|
|
|
/*
|
|
* Flow control register bit definitions. A set bit indicates
|
|
* that the register currently exhibits the corresponding mode.
|
|
*/
|
|
|
|
#define INTEL_PRGM 0x0001 /* Intelligent programming is in effect. */
|
|
#define CASCADE 0x0002 /* Currently splitting large SDR. */
|
|
#define REPEATLOOP 0x0008 /* Currently executing a repeat loop. */
|
|
#define SHIFTRIGHT 0x0080 /* The next data stream needs a right shift. */
|
|
#define SHIFTLEFT 0x0100 /* The next data stream needs a left shift. */
|
|
#define VERIFYUES 0x0200 /* Continue if fail is in effect. */
|
|
|
|
/*
|
|
* DataType register bit definitions. A set bit indicates
|
|
* that the register currently holds the corresponding type of data.
|
|
*/
|
|
|
|
#define EXPRESS 0x0001 /* Simultaneous program and verify. */
|
|
#define SIR_DATA 0x0002 /* SIR is the active SVF command. */
|
|
#define SDR_DATA 0x0004 /* SDR is the active SVF command. */
|
|
#define COMPRESS 0x0008 /* Data is compressed. */
|
|
#define TDI_DATA 0x0010 /* TDI data is present. */
|
|
#define TDO_DATA 0x0020 /* TDO data is present. */
|
|
#define MASK_DATA 0x0040 /* MASK data is present. */
|
|
#define HEAP_IN 0x0080 /* Data is from the heap. */
|
|
#define LHEAP_IN 0x0200 /* Data is from intel data buffer. */
|
|
#define VARIABLE 0x0400 /* Data is from a declared variable. */
|
|
#define CRC_DATA 0x0800 /* CRC data is pressent. */
|
|
#define CMASK_DATA 0x1000 /* CMASK data is pressent. */
|
|
#define RMASK_DATA 0x2000 /* RMASK data is pressent. */
|
|
#define READ_DATA 0x4000 /* READ data is pressent. */
|
|
#define DMASK_DATA 0x8000 /* DMASK data is pressent. */
|
|
|
|
/*
|
|
*
|
|
* Pin opcodes.
|
|
*
|
|
*/
|
|
|
|
#define signalENABLE 0x1C /* ispENABLE pin. */
|
|
#define signalTMS 0x1D /* TMS pin. */
|
|
#define signalTCK 0x1E /* TCK pin. */
|
|
#define signalTDI 0x1F /* TDI pin. */
|
|
#define signalTRST 0x20 /* TRST pin. */
|
|
|
|
/*
|
|
*
|
|
* Supported vendors.
|
|
*
|
|
*/
|
|
|
|
#define VENDOR 0x56
|
|
#define LATTICE 0x01
|
|
#define ALTERA 0x02
|
|
#define XILINX 0x03
|
|
|
|
/*
|
|
* Opcode definitions.
|
|
*
|
|
* Note: opcodes must be unique.
|
|
*/
|
|
|
|
#define ENDDATA 0x00 /* The end of the current SDR data stream. */
|
|
#define RUNTEST 0x01 /* The duration to stay at the stable state. */
|
|
#define ENDDR 0x02 /* The stable state after SDR. */
|
|
#define ENDIR 0x03 /* The stable state after SIR. */
|
|
#define ENDSTATE 0x04 /* The stable state after RUNTEST. */
|
|
#define TRST 0x05 /* Assert the TRST pin. */
|
|
#define HIR 0x06 /*
|
|
* The sum of the IR bits of the
|
|
* leading devices.
|
|
*/
|
|
#define TIR 0x07 /*
|
|
* The sum of the IR bits of the trailing
|
|
* devices.
|
|
*/
|
|
#define HDR 0x08 /* The number of leading devices. */
|
|
#define TDR 0x09 /* The number of trailing devices. */
|
|
#define ispEN 0x0A /* Assert the ispEN pin. */
|
|
#define FREQUENCY 0x0B /*
|
|
* The maximum clock rate to run the JTAG state
|
|
* machine.
|
|
*/
|
|
#define STATE 0x10 /* Move to the next stable state. */
|
|
#define SIR 0x11 /* The instruction stream follows. */
|
|
#define SDR 0x12 /* The data stream follows. */
|
|
#define TDI 0x13 /* The following data stream feeds into
|
|
the device. */
|
|
#define TDO 0x14 /*
|
|
* The following data stream is compared against
|
|
* the device.
|
|
*/
|
|
#define MASK 0x15 /* The following data stream is used as mask. */
|
|
#define XSDR 0x16 /*
|
|
* The following data stream is for simultaneous
|
|
* program and verify.
|
|
*/
|
|
#define XTDI 0x17 /* The following data stream is for shift in
|
|
* only. It must be stored for the next
|
|
* XSDR.
|
|
*/
|
|
#define XTDO 0x18 /*
|
|
* There is not data stream. The data stream
|
|
* was stored from the previous XTDI.
|
|
*/
|
|
#define MEM 0x19 /*
|
|
* The maximum memory needed to allocate in
|
|
* order hold one row of data.
|
|
*/
|
|
#define WAIT 0x1A /* The duration of delay to observe. */
|
|
#define TCK 0x1B /* The number of TCK pulses. */
|
|
#define SHR 0x23 /*
|
|
* Set the flow control register for
|
|
* right shift
|
|
*/
|
|
#define SHL 0x24 /*
|
|
* Set the flow control register for left shift.
|
|
*/
|
|
#define HEAP 0x32 /* The memory size needed to hold one loop. */
|
|
#define REPEAT 0x33 /* The beginning of the loop. */
|
|
#define LEFTPAREN 0x35 /* The beginning of data following the loop. */
|
|
#define VAR 0x55 /* Plac holder for loop data. */
|
|
#define SEC 0x1C /*
|
|
* The delay time in seconds that must be
|
|
* observed.
|
|
*/
|
|
#define SMASK 0x1D /* The mask for TDI data. */
|
|
#define MAX_WAIT 0x1E /* The absolute maximum wait time. */
|
|
#define ON 0x1F /* Assert the targeted pin. */
|
|
#define OFF 0x20 /* Dis-assert the targeted pin. */
|
|
#define SETFLOW 0x30 /* Change the flow control register. */
|
|
#define RESETFLOW 0x31 /* Clear the flow control register. */
|
|
|
|
#define CRC 0x47 /*
|
|
* The following data stream is used for CRC
|
|
* calculation.
|
|
*/
|
|
#define CMASK 0x48 /*
|
|
* The following data stream is used as mask
|
|
* for CRC calculation.
|
|
*/
|
|
#define RMASK 0x49 /*
|
|
* The following data stream is used as mask
|
|
* for read and save.
|
|
*/
|
|
#define READ 0x50 /*
|
|
* The following data stream is used for read
|
|
* and save.
|
|
*/
|
|
#define ENDLOOP 0x59 /* The end of the repeat loop. */
|
|
#define SECUREHEAP 0x60 /* Used to secure the HEAP opcode. */
|
|
#define VUES 0x61 /* Support continue if fail. */
|
|
#define DMASK 0x62 /*
|
|
* The following data stream is used for dynamic
|
|
* I/O.
|
|
*/
|
|
#define COMMENT 0x63 /* Support SVF comments in the VME file. */
|
|
#define HEADER 0x64 /* Support header in VME file. */
|
|
#define FILE_CRC 0x65 /* Support crc-protected VME file. */
|
|
#define LCOUNT 0x66 /* Support intelligent programming. */
|
|
#define LDELAY 0x67 /* Support intelligent programming. */
|
|
#define LSDR 0x68 /* Support intelligent programming. */
|
|
#define LHEAP 0x69 /*
|
|
* Memory needed to hold intelligent data
|
|
* buffer
|
|
*/
|
|
#define CONTINUE 0x70 /* Allow continuation. */
|
|
#define LVDS 0x71 /* Support LVDS. */
|
|
#define ENDVME 0x7F /* End of the VME file. */
|
|
#define ENDFILE 0xFF /* End of file. */
|
|
|
|
/*
|
|
*
|
|
* ispVM Embedded Return Codes.
|
|
*
|
|
*/
|
|
|
|
#define VME_VERIFICATION_FAILURE -1
|
|
#define VME_FILE_READ_FAILURE -2
|
|
#define VME_VERSION_FAILURE -3
|
|
#define VME_INVALID_FILE -4
|
|
#define VME_ARGUMENT_FAILURE -5
|
|
#define VME_CRC_FAILURE -6
|
|
|
|
#define g_ucPinTDI 0x01
|
|
#define g_ucPinTCK 0x02
|
|
#define g_ucPinTMS 0x04
|
|
#define g_ucPinENABLE 0x08
|
|
#define g_ucPinTRST 0x10
|
|
|
|
/*
|
|
*
|
|
* Type definitions.
|
|
*
|
|
*/
|
|
|
|
/* Support LVDS */
|
|
typedef struct {
|
|
unsigned short usPositiveIndex;
|
|
unsigned short usNegativeIndex;
|
|
unsigned char ucUpdate;
|
|
} LVDSPair;
|
|
|
|
typedef enum {
|
|
min_lattice_iface_type, /* insert all new types after this */
|
|
lattice_jtag_mode, /* jtag/tap */
|
|
max_lattice_iface_type /* insert all new types before this */
|
|
} Lattice_iface;
|
|
|
|
typedef enum {
|
|
min_lattice_type,
|
|
Lattice_XP2, /* Lattice XP2 Family */
|
|
max_lattice_type /* insert all new types before this */
|
|
} Lattice_Family;
|
|
|
|
typedef struct {
|
|
Lattice_Family family; /* part type */
|
|
Lattice_iface iface; /* interface type */
|
|
size_t size; /* bytes of data part can accept */
|
|
void *iface_fns; /* interface function table */
|
|
void *base; /* base interface address */
|
|
int cookie; /* implementation specific cookie */
|
|
char *desc; /* description string */
|
|
} Lattice_desc; /* end, typedef Altera_desc */
|
|
|
|
/* Board specific implementation specific function types */
|
|
typedef void (*Lattice_jtag_init)(void);
|
|
typedef void (*Lattice_jtag_set_tdi)(int v);
|
|
typedef void (*Lattice_jtag_set_tms)(int v);
|
|
typedef void (*Lattice_jtag_set_tck)(int v);
|
|
typedef int (*Lattice_jtag_get_tdo)(void);
|
|
|
|
typedef struct {
|
|
Lattice_jtag_init jtag_init;
|
|
Lattice_jtag_set_tdi jtag_set_tdi;
|
|
Lattice_jtag_set_tms jtag_set_tms;
|
|
Lattice_jtag_set_tck jtag_set_tck;
|
|
Lattice_jtag_get_tdo jtag_get_tdo;
|
|
} lattice_board_specific_func;
|
|
|
|
void writePort(unsigned char pins, unsigned char value);
|
|
unsigned char readPort(void);
|
|
void sclock(void);
|
|
void ispVMDelay(unsigned short int a_usMicroSecondDelay);
|
|
void calibration(void);
|
|
|
|
int lattice_load(Lattice_desc *desc, const void *buf, size_t bsize);
|
|
int lattice_dump(Lattice_desc *desc, const void *buf, size_t bsize);
|
|
int lattice_info(Lattice_desc *desc);
|
|
|
|
void ispVMStart(void);
|
|
void ispVMEnd(void);
|
|
extern void ispVMFreeMem(void);
|
|
signed char ispVMCode(void);
|
|
void ispVMDelay(unsigned short int a_usMicroSecondDelay);
|
|
void ispVMCalculateCRC32(unsigned char a_ucData);
|
|
unsigned char GetByte(void);
|
|
void writePort(unsigned char pins, unsigned char value);
|
|
unsigned char readPort(void);
|
|
void sclock(void);
|
|
#endif
|