mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-28 05:53:54 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1044 lines
26 KiB
C
1044 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Porting to u-boot:
|
|
*
|
|
* (C) Copyright 2011
|
|
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
|
|
*
|
|
* Copyright (C) 2008-2009 MontaVista Software Inc.
|
|
* Copyright (C) 2008-2009 Texas Instruments Inc
|
|
*
|
|
* Based on the LCD driver for TI Avalanche processors written by
|
|
* Ajay Singh and Shalom Hai.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <memalign.h>
|
|
#include <video_fb.h>
|
|
#include <linux/list.h>
|
|
#include <linux/fb.h>
|
|
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#include "videomodes.h"
|
|
#include "da8xx-fb.h"
|
|
|
|
#if !defined(DA8XX_LCD_CNTL_BASE)
|
|
#define DA8XX_LCD_CNTL_BASE DAVINCI_LCD_CNTL_BASE
|
|
#endif
|
|
|
|
#define DRIVER_NAME "da8xx_lcdc"
|
|
|
|
#define LCD_VERSION_1 1
|
|
#define LCD_VERSION_2 2
|
|
|
|
/* LCD Status Register */
|
|
#define LCD_END_OF_FRAME1 (1 << 9)
|
|
#define LCD_END_OF_FRAME0 (1 << 8)
|
|
#define LCD_PL_LOAD_DONE (1 << 6)
|
|
#define LCD_FIFO_UNDERFLOW (1 << 5)
|
|
#define LCD_SYNC_LOST (1 << 2)
|
|
|
|
/* LCD DMA Control Register */
|
|
#define LCD_DMA_BURST_SIZE(x) ((x) << 4)
|
|
#define LCD_DMA_BURST_1 0x0
|
|
#define LCD_DMA_BURST_2 0x1
|
|
#define LCD_DMA_BURST_4 0x2
|
|
#define LCD_DMA_BURST_8 0x3
|
|
#define LCD_DMA_BURST_16 0x4
|
|
#define LCD_V1_END_OF_FRAME_INT_ENA (1 << 2)
|
|
#define LCD_V2_END_OF_FRAME0_INT_ENA (1 << 8)
|
|
#define LCD_V2_END_OF_FRAME1_INT_ENA (1 << 9)
|
|
#define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0)
|
|
|
|
#define LCD_V2_TFT_24BPP_MODE (1 << 25)
|
|
#define LCD_V2_TFT_24BPP_UNPACK (1 << 26)
|
|
|
|
/* LCD Control Register */
|
|
#define LCD_CLK_DIVISOR(x) ((x) << 8)
|
|
#define LCD_RASTER_MODE 0x01
|
|
|
|
/* LCD Raster Control Register */
|
|
#define LCD_PALETTE_LOAD_MODE(x) ((x) << 20)
|
|
#define PALETTE_AND_DATA 0x00
|
|
#define PALETTE_ONLY 0x01
|
|
#define DATA_ONLY 0x02
|
|
|
|
#define LCD_MONO_8BIT_MODE (1 << 9)
|
|
#define LCD_RASTER_ORDER (1 << 8)
|
|
#define LCD_TFT_MODE (1 << 7)
|
|
#define LCD_V1_UNDERFLOW_INT_ENA (1 << 6)
|
|
#define LCD_V2_UNDERFLOW_INT_ENA (1 << 5)
|
|
#define LCD_V1_PL_INT_ENA (1 << 4)
|
|
#define LCD_V2_PL_INT_ENA (1 << 6)
|
|
#define LCD_MONOCHROME_MODE (1 << 1)
|
|
#define LCD_RASTER_ENABLE (1 << 0)
|
|
#define LCD_TFT_ALT_ENABLE (1 << 23)
|
|
#define LCD_STN_565_ENABLE (1 << 24)
|
|
#define LCD_V2_DMA_CLK_EN (1 << 2)
|
|
#define LCD_V2_LIDD_CLK_EN (1 << 1)
|
|
#define LCD_V2_CORE_CLK_EN (1 << 0)
|
|
#define LCD_V2_LPP_B10 26
|
|
#define LCD_V2_TFT_24BPP_MODE (1 << 25)
|
|
#define LCD_V2_TFT_24BPP_UNPACK (1 << 26)
|
|
|
|
/* LCD Raster Timing 2 Register */
|
|
#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16)
|
|
#define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8)
|
|
#define LCD_SYNC_CTRL (1 << 25)
|
|
#define LCD_SYNC_EDGE (1 << 24)
|
|
#define LCD_INVERT_PIXEL_CLOCK (1 << 22)
|
|
#define LCD_INVERT_LINE_CLOCK (1 << 21)
|
|
#define LCD_INVERT_FRAME_CLOCK (1 << 20)
|
|
|
|
/* Clock registers available only on Version 2 */
|
|
#define LCD_CLK_MAIN_RESET (1 << 3)
|
|
/* LCD Block */
|
|
struct da8xx_lcd_regs {
|
|
u32 revid;
|
|
u32 ctrl;
|
|
u32 stat;
|
|
u32 lidd_ctrl;
|
|
u32 lidd_cs0_conf;
|
|
u32 lidd_cs0_addr;
|
|
u32 lidd_cs0_data;
|
|
u32 lidd_cs1_conf;
|
|
u32 lidd_cs1_addr;
|
|
u32 lidd_cs1_data;
|
|
u32 raster_ctrl;
|
|
u32 raster_timing_0;
|
|
u32 raster_timing_1;
|
|
u32 raster_timing_2;
|
|
u32 raster_subpanel;
|
|
u32 reserved;
|
|
u32 dma_ctrl;
|
|
u32 dma_frm_buf_base_addr_0;
|
|
u32 dma_frm_buf_ceiling_addr_0;
|
|
u32 dma_frm_buf_base_addr_1;
|
|
u32 dma_frm_buf_ceiling_addr_1;
|
|
u32 resv1;
|
|
u32 raw_stat;
|
|
u32 masked_stat;
|
|
u32 int_ena_set;
|
|
u32 int_ena_clr;
|
|
u32 end_of_int_ind;
|
|
/* Clock registers available only on Version 2 */
|
|
u32 clk_ena;
|
|
u32 clk_reset;
|
|
};
|
|
|
|
#define LCD_NUM_BUFFERS 1
|
|
|
|
#define WSI_TIMEOUT 50
|
|
#define PALETTE_SIZE 256
|
|
#define LEFT_MARGIN 64
|
|
#define RIGHT_MARGIN 64
|
|
#define UPPER_MARGIN 32
|
|
#define LOWER_MARGIN 32
|
|
#define WAIT_FOR_FRAME_DONE true
|
|
#define NO_WAIT_FOR_FRAME_DONE false
|
|
|
|
#define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP)
|
|
|
|
static struct da8xx_lcd_regs *da8xx_fb_reg_base;
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* graphics setup */
|
|
static GraphicDevice gpanel;
|
|
static const struct da8xx_panel *lcd_panel;
|
|
static struct fb_info *da8xx_fb_info;
|
|
static int bits_x_pixel;
|
|
static unsigned int lcd_revision;
|
|
const struct lcd_ctrl_config *da8xx_lcd_cfg;
|
|
|
|
static inline unsigned int lcdc_read(u32 *addr)
|
|
{
|
|
return (unsigned int)readl(addr);
|
|
}
|
|
|
|
static inline void lcdc_write(unsigned int val, u32 *addr)
|
|
{
|
|
writel(val, addr);
|
|
}
|
|
|
|
struct da8xx_fb_par {
|
|
u32 p_palette_base;
|
|
unsigned char *v_palette_base;
|
|
dma_addr_t vram_phys;
|
|
unsigned long vram_size;
|
|
void *vram_virt;
|
|
unsigned int dma_start;
|
|
unsigned int dma_end;
|
|
struct clk *lcdc_clk;
|
|
int irq;
|
|
unsigned short pseudo_palette[16];
|
|
unsigned int palette_sz;
|
|
unsigned int pxl_clk;
|
|
int blank;
|
|
int vsync_flag;
|
|
int vsync_timeout;
|
|
};
|
|
|
|
|
|
/* Variable Screen Information */
|
|
static struct fb_var_screeninfo da8xx_fb_var = {
|
|
.xoffset = 0,
|
|
.yoffset = 0,
|
|
.transp = {0, 0, 0},
|
|
.nonstd = 0,
|
|
.activate = 0,
|
|
.height = -1,
|
|
.width = -1,
|
|
.pixclock = 46666, /* 46us - AUO display */
|
|
.accel_flags = 0,
|
|
.left_margin = LEFT_MARGIN,
|
|
.right_margin = RIGHT_MARGIN,
|
|
.upper_margin = UPPER_MARGIN,
|
|
.lower_margin = LOWER_MARGIN,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
};
|
|
|
|
static struct fb_fix_screeninfo da8xx_fb_fix = {
|
|
.id = "DA8xx FB Drv",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.type_aux = 0,
|
|
.visual = FB_VISUAL_PSEUDOCOLOR,
|
|
.xpanstep = 0,
|
|
.ypanstep = 1,
|
|
.ywrapstep = 0,
|
|
.accel = FB_ACCEL_NONE
|
|
};
|
|
|
|
/* Enable the Raster Engine of the LCD Controller */
|
|
static inline void lcd_enable_raster(void)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Put LCDC in reset for several cycles */
|
|
if (lcd_revision == LCD_VERSION_2)
|
|
lcdc_write(LCD_CLK_MAIN_RESET,
|
|
&da8xx_fb_reg_base->clk_reset);
|
|
|
|
udelay(1000);
|
|
/* Bring LCDC out of reset */
|
|
if (lcd_revision == LCD_VERSION_2)
|
|
lcdc_write(0,
|
|
&da8xx_fb_reg_base->clk_reset);
|
|
|
|
udelay(1000);
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
if (!(reg & LCD_RASTER_ENABLE))
|
|
lcdc_write(reg | LCD_RASTER_ENABLE,
|
|
&da8xx_fb_reg_base->raster_ctrl);
|
|
}
|
|
|
|
/* Disable the Raster Engine of the LCD Controller */
|
|
static inline void lcd_disable_raster(bool wait_for_frame_done)
|
|
{
|
|
u32 reg;
|
|
u32 loop_cnt = 0;
|
|
u32 stat;
|
|
u32 i = 0;
|
|
|
|
if (wait_for_frame_done)
|
|
loop_cnt = 5000;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
if (reg & LCD_RASTER_ENABLE)
|
|
lcdc_write(reg & ~LCD_RASTER_ENABLE,
|
|
&da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
/* Wait for the current frame to complete */
|
|
do {
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
stat = lcdc_read(&da8xx_fb_reg_base->stat);
|
|
else
|
|
stat = lcdc_read(&da8xx_fb_reg_base->raw_stat);
|
|
|
|
mdelay(1);
|
|
} while (!(stat & 0x01) && (i++ < loop_cnt));
|
|
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
else
|
|
lcdc_write(stat, &da8xx_fb_reg_base->raw_stat);
|
|
|
|
if ((loop_cnt != 0) && (i >= loop_cnt)) {
|
|
printf("LCD Controller timed out\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
|
|
{
|
|
u32 start;
|
|
u32 end;
|
|
u32 reg_ras;
|
|
u32 reg_dma;
|
|
u32 reg_int;
|
|
|
|
/* init reg to clear PLM (loading mode) fields */
|
|
reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
reg_ras &= ~(3 << 20);
|
|
|
|
reg_dma = lcdc_read(&da8xx_fb_reg_base->dma_ctrl);
|
|
|
|
if (load_mode == LOAD_DATA) {
|
|
start = par->dma_start;
|
|
end = par->dma_end;
|
|
|
|
reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA;
|
|
} else {
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
|
|
LCD_V2_END_OF_FRAME0_INT_ENA |
|
|
LCD_V2_END_OF_FRAME1_INT_ENA |
|
|
LCD_V2_UNDERFLOW_INT_ENA | LCD_SYNC_LOST;
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
|
|
}
|
|
|
|
#if (LCD_NUM_BUFFERS == 2)
|
|
reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
|
|
#else
|
|
reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE;
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
|
|
lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
|
|
#endif
|
|
|
|
} else if (load_mode == LOAD_PALETTE) {
|
|
start = par->p_palette_base;
|
|
end = start + par->palette_sz - 1;
|
|
|
|
reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg_ras |= LCD_V1_PL_INT_ENA;
|
|
} else {
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
|
|
LCD_V2_PL_INT_ENA;
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
|
|
}
|
|
|
|
lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
}
|
|
|
|
lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl);
|
|
lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
/*
|
|
* The Raster enable bit must be set after all other control fields are
|
|
* set.
|
|
*/
|
|
lcd_enable_raster();
|
|
}
|
|
|
|
/* Configure the Burst Size of DMA */
|
|
static int lcd_cfg_dma(int burst_size)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001;
|
|
switch (burst_size) {
|
|
case 1:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1);
|
|
break;
|
|
case 2:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2);
|
|
break;
|
|
case 4:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4);
|
|
break;
|
|
case 8:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
|
|
break;
|
|
case 16:
|
|
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lcd_cfg_ac_bias(int period, int transitions_per_int)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Set the AC Bias Period and Number of Transitions per Interrupt */
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000;
|
|
reg |= LCD_AC_BIAS_FREQUENCY(period) |
|
|
LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
|
|
}
|
|
|
|
static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
|
|
int front_porch)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf;
|
|
reg |= ((back_porch & 0xff) << 24)
|
|
| ((front_porch & 0xff) << 16)
|
|
| ((pulse_width & 0x3f) << 10);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
|
|
}
|
|
|
|
static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
|
|
int front_porch)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff;
|
|
reg |= ((back_porch & 0xff) << 24)
|
|
| ((front_porch & 0xff) << 16)
|
|
| ((pulse_width & 0x3f) << 10);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
|
|
}
|
|
|
|
static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
|
|
{
|
|
u32 reg;
|
|
u32 reg_int;
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE |
|
|
LCD_MONO_8BIT_MODE |
|
|
LCD_MONOCHROME_MODE);
|
|
|
|
switch (cfg->p_disp_panel->panel_shade) {
|
|
case MONOCHROME:
|
|
reg |= LCD_MONOCHROME_MODE;
|
|
if (cfg->mono_8bit_mode)
|
|
reg |= LCD_MONO_8BIT_MODE;
|
|
break;
|
|
case COLOR_ACTIVE:
|
|
reg |= LCD_TFT_MODE;
|
|
if (cfg->tft_alt_mode)
|
|
reg |= LCD_TFT_ALT_ENABLE;
|
|
break;
|
|
|
|
case COLOR_PASSIVE:
|
|
if (cfg->stn_565_mode)
|
|
reg |= LCD_STN_565_ENABLE;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* enable additional interrupts here */
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg |= LCD_V1_UNDERFLOW_INT_ENA;
|
|
} else {
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
|
|
LCD_V2_UNDERFLOW_INT_ENA;
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
|
|
}
|
|
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
|
|
|
|
if (cfg->sync_ctrl)
|
|
reg |= LCD_SYNC_CTRL;
|
|
else
|
|
reg &= ~LCD_SYNC_CTRL;
|
|
|
|
if (cfg->sync_edge)
|
|
reg |= LCD_SYNC_EDGE;
|
|
else
|
|
reg &= ~LCD_SYNC_EDGE;
|
|
|
|
if (cfg->invert_line_clock)
|
|
reg |= LCD_INVERT_LINE_CLOCK;
|
|
else
|
|
reg &= ~LCD_INVERT_LINE_CLOCK;
|
|
|
|
if (cfg->invert_frm_clock)
|
|
reg |= LCD_INVERT_FRAME_CLOCK;
|
|
else
|
|
reg &= ~LCD_INVERT_FRAME_CLOCK;
|
|
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
|
|
u32 bpp, u32 raster_order)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Set the Panel Width */
|
|
/* Pixels per line = (PPL + 1)*16 */
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
/*
|
|
* 0x3F in bits 4..9 gives max horizontal resolution = 1024
|
|
* pixels
|
|
*/
|
|
width &= 0x3f0;
|
|
} else {
|
|
/*
|
|
* 0x7F in bits 4..10 gives max horizontal resolution = 2048
|
|
* pixels.
|
|
*/
|
|
width &= 0x7f0;
|
|
}
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0);
|
|
reg &= 0xfffffc00;
|
|
if (lcd_revision == LCD_VERSION_1) {
|
|
reg |= ((width >> 4) - 1) << 4;
|
|
} else {
|
|
width = (width >> 4) - 1;
|
|
reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3);
|
|
}
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
|
|
|
|
/* Set the Panel Height */
|
|
/* Set bits 9:0 of Lines Per Pixel */
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1);
|
|
reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
|
|
|
|
/* Set bit 10 of Lines Per Pixel */
|
|
if (lcd_revision == LCD_VERSION_2) {
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
|
|
reg |= ((height - 1) & 0x400) << 16;
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
|
|
}
|
|
|
|
/* Set the Raster Order of the Frame Buffer */
|
|
reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8);
|
|
if (raster_order)
|
|
reg |= LCD_RASTER_ORDER;
|
|
|
|
if (bpp == 24)
|
|
reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE);
|
|
else if (bpp == 32)
|
|
reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE
|
|
| LCD_V2_TFT_24BPP_UNPACK);
|
|
|
|
lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
switch (bpp) {
|
|
case 1:
|
|
case 2:
|
|
case 4:
|
|
case 16:
|
|
case 24:
|
|
case 32:
|
|
par->palette_sz = 16 * 2;
|
|
break;
|
|
|
|
case 8:
|
|
par->palette_sz = 256 * 2;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
struct da8xx_fb_par *par = info->par;
|
|
unsigned short *palette = (unsigned short *) par->v_palette_base;
|
|
u_short pal;
|
|
int update_hw = 0;
|
|
|
|
if (regno > 255)
|
|
return 1;
|
|
|
|
if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
|
|
return 1;
|
|
|
|
if (info->var.bits_per_pixel == 8) {
|
|
red >>= 4;
|
|
green >>= 8;
|
|
blue >>= 12;
|
|
|
|
pal = (red & 0x0f00);
|
|
pal |= (green & 0x00f0);
|
|
pal |= (blue & 0x000f);
|
|
|
|
if (palette[regno] != pal) {
|
|
update_hw = 1;
|
|
palette[regno] = pal;
|
|
}
|
|
} else if ((info->var.bits_per_pixel == 16) && regno < 16) {
|
|
red >>= (16 - info->var.red.length);
|
|
red <<= info->var.red.offset;
|
|
|
|
green >>= (16 - info->var.green.length);
|
|
green <<= info->var.green.offset;
|
|
|
|
blue >>= (16 - info->var.blue.length);
|
|
blue <<= info->var.blue.offset;
|
|
|
|
par->pseudo_palette[regno] = red | green | blue;
|
|
|
|
if (palette[0] != 0x4000) {
|
|
update_hw = 1;
|
|
palette[0] = 0x4000;
|
|
}
|
|
} else if (((info->var.bits_per_pixel == 32) && regno < 32) ||
|
|
((info->var.bits_per_pixel == 24) && regno < 24)) {
|
|
red >>= (24 - info->var.red.length);
|
|
red <<= info->var.red.offset;
|
|
|
|
green >>= (24 - info->var.green.length);
|
|
green <<= info->var.green.offset;
|
|
|
|
blue >>= (24 - info->var.blue.length);
|
|
blue <<= info->var.blue.offset;
|
|
|
|
par->pseudo_palette[regno] = red | green | blue;
|
|
|
|
if (palette[0] != 0x4000) {
|
|
update_hw = 1;
|
|
palette[0] = 0x4000;
|
|
}
|
|
}
|
|
|
|
/* Update the palette in the h/w as needed. */
|
|
if (update_hw)
|
|
lcd_blit(LOAD_PALETTE, par);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lcd_reset(struct da8xx_fb_par *par)
|
|
{
|
|
/* Disable the Raster if previously Enabled */
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
|
|
/* DMA has to be disabled */
|
|
lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl);
|
|
lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
if (lcd_revision == LCD_VERSION_2) {
|
|
lcdc_write(0, &da8xx_fb_reg_base->int_ena_set);
|
|
/* Write 1 to reset */
|
|
lcdc_write(LCD_CLK_MAIN_RESET, &da8xx_fb_reg_base->clk_reset);
|
|
lcdc_write(0, &da8xx_fb_reg_base->clk_reset);
|
|
}
|
|
}
|
|
|
|
static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
|
|
{
|
|
unsigned int lcd_clk, div;
|
|
|
|
/* Get clock from sysclk2 */
|
|
lcd_clk = clk_get(2);
|
|
|
|
div = lcd_clk / par->pxl_clk;
|
|
debug("LCD Clock: %d Divider: %d PixClk: %d\n",
|
|
lcd_clk, div, par->pxl_clk);
|
|
|
|
/* Configure the LCD clock divisor. */
|
|
lcdc_write(LCD_CLK_DIVISOR(div) |
|
|
(LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl);
|
|
|
|
if (lcd_revision == LCD_VERSION_2)
|
|
lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
|
|
LCD_V2_CORE_CLK_EN,
|
|
&da8xx_fb_reg_base->clk_ena);
|
|
}
|
|
|
|
static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
|
|
const struct da8xx_panel *panel)
|
|
{
|
|
u32 bpp;
|
|
int ret = 0;
|
|
|
|
lcd_reset(par);
|
|
|
|
/* Calculate the divider */
|
|
lcd_calc_clk_divider(par);
|
|
|
|
if (panel->invert_pxl_clk)
|
|
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) |
|
|
LCD_INVERT_PIXEL_CLOCK),
|
|
&da8xx_fb_reg_base->raster_timing_2);
|
|
else
|
|
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) &
|
|
~LCD_INVERT_PIXEL_CLOCK),
|
|
&da8xx_fb_reg_base->raster_timing_2);
|
|
|
|
/* Configure the DMA burst size. */
|
|
ret = lcd_cfg_dma(cfg->dma_burst_sz);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Configure the AC bias properties. */
|
|
lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
|
|
|
|
/* Configure the vertical and horizontal sync properties. */
|
|
lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp);
|
|
lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp);
|
|
|
|
/* Configure for display */
|
|
ret = lcd_cfg_display(cfg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((QVGA != cfg->p_disp_panel->panel_type) &&
|
|
(WVGA != cfg->p_disp_panel->panel_type))
|
|
return -EINVAL;
|
|
|
|
if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
|
|
cfg->bpp >= cfg->p_disp_panel->min_bpp)
|
|
bpp = cfg->bpp;
|
|
else
|
|
bpp = cfg->p_disp_panel->max_bpp;
|
|
if (bpp == 12)
|
|
bpp = 16;
|
|
ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width,
|
|
(unsigned int)panel->height, bpp,
|
|
cfg->raster_order);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Configure FDD */
|
|
lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) |
|
|
(cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lcdc_dma_start(void)
|
|
{
|
|
struct da8xx_fb_par *par = da8xx_fb_info->par;
|
|
lcdc_write(par->dma_start,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(par->dma_end,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
lcdc_write(0,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
|
|
lcdc_write(0,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
|
|
}
|
|
|
|
static u32 lcdc_irq_handler_rev01(void)
|
|
{
|
|
struct da8xx_fb_par *par = da8xx_fb_info->par;
|
|
u32 stat = lcdc_read(&da8xx_fb_reg_base->stat);
|
|
u32 reg_ras;
|
|
|
|
if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
|
|
debug("LCD_SYNC_LOST\n");
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
lcd_enable_raster();
|
|
return LCD_SYNC_LOST;
|
|
} else if (stat & LCD_PL_LOAD_DONE) {
|
|
debug("LCD_PL_LOAD_DONE\n");
|
|
/*
|
|
* Must disable raster before changing state of any control bit.
|
|
* And also must be disabled before clearing the PL loading
|
|
* interrupt via the following write to the status register. If
|
|
* this is done after then one gets multiple PL done interrupts.
|
|
*/
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
|
|
/* Disable PL completion interrupt */
|
|
reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
|
|
reg_ras &= ~LCD_V1_PL_INT_ENA;
|
|
lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
|
|
|
|
/* Setup and start data loading mode */
|
|
lcd_blit(LOAD_DATA, par);
|
|
return LCD_PL_LOAD_DONE;
|
|
} else {
|
|
lcdc_write(stat, &da8xx_fb_reg_base->stat);
|
|
|
|
if (stat & LCD_END_OF_FRAME0)
|
|
debug("LCD_END_OF_FRAME0\n");
|
|
|
|
lcdc_write(par->dma_start,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(par->dma_end,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
par->vsync_flag = 1;
|
|
return LCD_END_OF_FRAME0;
|
|
}
|
|
return stat;
|
|
}
|
|
|
|
static u32 lcdc_irq_handler_rev02(void)
|
|
{
|
|
struct da8xx_fb_par *par = da8xx_fb_info->par;
|
|
u32 stat = lcdc_read(&da8xx_fb_reg_base->masked_stat);
|
|
u32 reg_int;
|
|
|
|
if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
|
|
debug("LCD_SYNC_LOST\n");
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
|
|
lcd_enable_raster();
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return LCD_SYNC_LOST;
|
|
} else if (stat & LCD_PL_LOAD_DONE) {
|
|
debug("LCD_PL_LOAD_DONE\n");
|
|
/*
|
|
* Must disable raster before changing state of any control bit.
|
|
* And also must be disabled before clearing the PL loading
|
|
* interrupt via the following write to the status register. If
|
|
* this is done after then one gets multiple PL done interrupts.
|
|
*/
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
|
|
lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
|
|
|
|
/* Disable PL completion interrupt */
|
|
reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) |
|
|
(LCD_V2_PL_INT_ENA);
|
|
lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr);
|
|
|
|
/* Setup and start data loading mode */
|
|
lcd_blit(LOAD_DATA, par);
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return LCD_PL_LOAD_DONE;
|
|
} else {
|
|
lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
|
|
|
|
if (stat & LCD_END_OF_FRAME0)
|
|
debug("LCD_END_OF_FRAME0\n");
|
|
|
|
lcdc_write(par->dma_start,
|
|
&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
|
|
lcdc_write(par->dma_end,
|
|
&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
|
|
par->vsync_flag = 1;
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return LCD_END_OF_FRAME0;
|
|
}
|
|
lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
|
|
return stat;
|
|
}
|
|
|
|
static u32 lcdc_irq_handler(void)
|
|
{
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
return lcdc_irq_handler_rev01();
|
|
else
|
|
return lcdc_irq_handler_rev02();
|
|
}
|
|
|
|
static u32 wait_for_event(u32 event)
|
|
{
|
|
u32 timeout = 50000;
|
|
u32 ret;
|
|
|
|
do {
|
|
ret = lcdc_irq_handler();
|
|
udelay(1000);
|
|
--timeout;
|
|
} while (!(ret & event) && timeout);
|
|
|
|
if (!(ret & event)) {
|
|
printf("%s: event %d not hit\n", __func__, event);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
void *video_hw_init(void)
|
|
{
|
|
struct da8xx_fb_par *par;
|
|
u32 size;
|
|
u32 rev;
|
|
char *p;
|
|
|
|
if (!lcd_panel) {
|
|
printf("Display not initialized\n");
|
|
return NULL;
|
|
}
|
|
gpanel.winSizeX = lcd_panel->width;
|
|
gpanel.winSizeY = lcd_panel->height;
|
|
gpanel.plnSizeX = lcd_panel->width;
|
|
gpanel.plnSizeY = lcd_panel->height;
|
|
|
|
switch (bits_x_pixel) {
|
|
case 32:
|
|
gpanel.gdfBytesPP = 4;
|
|
gpanel.gdfIndex = GDF_32BIT_X888RGB;
|
|
break;
|
|
case 24:
|
|
gpanel.gdfBytesPP = 4;
|
|
gpanel.gdfIndex = GDF_32BIT_X888RGB;
|
|
break;
|
|
case 16:
|
|
gpanel.gdfBytesPP = 2;
|
|
gpanel.gdfIndex = GDF_16BIT_565RGB;
|
|
break;
|
|
default:
|
|
gpanel.gdfBytesPP = 1;
|
|
gpanel.gdfIndex = GDF__8BIT_INDEX;
|
|
break;
|
|
}
|
|
|
|
da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DA8XX_LCD_CNTL_BASE;
|
|
|
|
/* Determine LCD IP Version */
|
|
rev = lcdc_read(&da8xx_fb_reg_base->revid);
|
|
switch (rev) {
|
|
case 0x4C100102:
|
|
lcd_revision = LCD_VERSION_1;
|
|
break;
|
|
case 0x4F200800:
|
|
case 0x4F201000:
|
|
lcd_revision = LCD_VERSION_2;
|
|
break;
|
|
default:
|
|
printf("Unknown PID Reg value 0x%x, defaulting to LCD revision 1\n",
|
|
rev);
|
|
lcd_revision = LCD_VERSION_1;
|
|
break;
|
|
}
|
|
|
|
debug("rev: 0x%x Resolution: %dx%d %d\n", rev,
|
|
gpanel.winSizeX,
|
|
gpanel.winSizeY,
|
|
da8xx_lcd_cfg->bpp);
|
|
|
|
size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par);
|
|
da8xx_fb_info = malloc_cache_aligned(size);
|
|
debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info);
|
|
|
|
if (!da8xx_fb_info) {
|
|
printf("Memory allocation failed for fb_info\n");
|
|
return NULL;
|
|
}
|
|
memset(da8xx_fb_info, 0, size);
|
|
p = (char *)da8xx_fb_info;
|
|
da8xx_fb_info->par = p + sizeof(struct fb_info);
|
|
debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par);
|
|
|
|
par = da8xx_fb_info->par;
|
|
par->pxl_clk = lcd_panel->pxl_clk;
|
|
|
|
if (lcd_init(par, da8xx_lcd_cfg, lcd_panel) < 0) {
|
|
printf("lcd_init failed\n");
|
|
goto err_release_fb;
|
|
}
|
|
|
|
/* allocate frame buffer */
|
|
par->vram_size = lcd_panel->width * lcd_panel->height *
|
|
da8xx_lcd_cfg->bpp;
|
|
par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8;
|
|
|
|
par->vram_virt = malloc_cache_aligned(par->vram_size);
|
|
|
|
par->vram_phys = (dma_addr_t) par->vram_virt;
|
|
debug("Requesting 0x%x bytes for framebuffer at 0x%x\n",
|
|
(unsigned int)par->vram_size,
|
|
(unsigned int)par->vram_virt);
|
|
if (!par->vram_virt) {
|
|
printf("GLCD: malloc for frame buffer failed\n");
|
|
goto err_release_fb;
|
|
}
|
|
gd->fb_base = (int)par->vram_virt;
|
|
|
|
gpanel.frameAdrs = (unsigned int)par->vram_virt;
|
|
da8xx_fb_info->screen_base = (char *) par->vram_virt;
|
|
da8xx_fb_fix.smem_start = gpanel.frameAdrs;
|
|
da8xx_fb_fix.smem_len = par->vram_size;
|
|
da8xx_fb_fix.line_length = (lcd_panel->width * da8xx_lcd_cfg->bpp) / 8;
|
|
|
|
par->dma_start = par->vram_phys;
|
|
par->dma_end = par->dma_start + lcd_panel->height *
|
|
da8xx_fb_fix.line_length - 1;
|
|
|
|
/* allocate palette buffer */
|
|
par->v_palette_base = malloc_cache_aligned(PALETTE_SIZE);
|
|
if (!par->v_palette_base) {
|
|
printf("GLCD: malloc for palette buffer failed\n");
|
|
goto err_release_fb_mem;
|
|
}
|
|
memset(par->v_palette_base, 0, PALETTE_SIZE);
|
|
par->p_palette_base = (unsigned int)par->v_palette_base;
|
|
|
|
/* Initialize par */
|
|
da8xx_fb_info->var.bits_per_pixel = da8xx_lcd_cfg->bpp;
|
|
|
|
da8xx_fb_var.xres = lcd_panel->width;
|
|
da8xx_fb_var.xres_virtual = lcd_panel->width;
|
|
|
|
da8xx_fb_var.yres = lcd_panel->height;
|
|
da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS;
|
|
|
|
da8xx_fb_var.grayscale =
|
|
da8xx_lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
|
|
da8xx_fb_var.bits_per_pixel = da8xx_lcd_cfg->bpp;
|
|
|
|
da8xx_fb_var.hsync_len = lcd_panel->hsw;
|
|
da8xx_fb_var.vsync_len = lcd_panel->vsw;
|
|
|
|
/* Initialize fbinfo */
|
|
da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT;
|
|
da8xx_fb_info->fix = da8xx_fb_fix;
|
|
da8xx_fb_info->var = da8xx_fb_var;
|
|
da8xx_fb_info->pseudo_palette = par->pseudo_palette;
|
|
da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
|
|
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
|
|
|
|
/* Clear interrupt */
|
|
memset((void *)par->vram_virt, 0, par->vram_size);
|
|
lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
|
|
if (lcd_revision == LCD_VERSION_1)
|
|
lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat);
|
|
else
|
|
lcdc_write(0xFFFF, &da8xx_fb_reg_base->masked_stat);
|
|
debug("Palette at 0x%x size %d\n", par->p_palette_base,
|
|
par->palette_sz);
|
|
lcdc_dma_start();
|
|
|
|
/* Load a default palette */
|
|
fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info);
|
|
|
|
/* Check that the palette is loaded */
|
|
wait_for_event(LCD_PL_LOAD_DONE);
|
|
|
|
/* Wait until DMA is working */
|
|
wait_for_event(LCD_END_OF_FRAME0);
|
|
|
|
return (void *)&gpanel;
|
|
|
|
err_release_fb_mem:
|
|
free(par->vram_virt);
|
|
|
|
err_release_fb:
|
|
free(da8xx_fb_info);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
void da8xx_video_init(const struct da8xx_panel *panel,
|
|
const struct lcd_ctrl_config *lcd_cfg, int bits_pixel)
|
|
{
|
|
lcd_panel = panel;
|
|
da8xx_lcd_cfg = lcd_cfg;
|
|
bits_x_pixel = bits_pixel;
|
|
}
|